List Your Overclocks

By Si
in Hardware Hangout

 Share

Recommended Posts

Collaborator

GuidZilla

Posted
Posted

280 is nice man! whats your temps?

Woops, didn't see yer question, sorry about that. Well recently made some changes. With the 280 before my cpu was gettin kinda toasty, not horrible by any means, but to me I don't like to hit 55 degrees unless its a short peg. So recently I installed a Kingwin Aquastar water cooling setup(my first time with liquid so went with a kit till I learn the ins and outs, prolly go custom this summer). I first installed with both cpu/gpu being cooled but decided to go with just CPU so I wouldn't lose any effect with the GPU in the loop. The stock cooler on my X850 XT does great anyway even with o/c, and isn't overly loud. So now my best o/c, tho is wasn't quite perfectly stable(still workin with the ram timings and such)was 296x9. Was memtest stable for freakin ever, just not perfect in XP yet. This ram for not being 'high end' ram when I bought it over a year ago(patriot xblk 3200 2x512) is performing great. I rigged up an extra fan for a lil' active ram cooling too. So stable now i'm sittin at 290x9. 2.8v on the ram, 1.65 on the cpu. Idle CPU temps are 29-32, load is 45-47. Nice change from my stock air cooling before, which when I turned up the juice quite a bit would just wanna scream towards 60 if I would let it.

Collaborator

GuidZilla

Posted
Posted

DFI Lanparty NF4 Ultra-D

AMD Athlon 64 3200+ @ 2.5Ghz

1.4125V

My ram is OCZ 2x1GB platinum, and I have to say it is disappointing. I can barely go over 200Mhz with it before the machine will not boot. I have it at a 5/6 divider

You should be able to get quite a bit more outta that even with 1:1. Have you tried upping the vcore and dram voltage a smidge? I can't remember off hand what type of chips are on your ram, tccd like mine typically doesn't like ALOT of extra voltage, like max 3.0ish, but the other type likes alot of it. Also perhaps you simply need to loosen your ram timings a bit. If your not a visitor already, checkout dfi-street.com ... Best DFI forums out there, lots of guides, as well as a couple actual DFI reps on the board. You may wanna try a different bios too, some o/c better than others. TMOD on the dfi forums created a menu-driven bootable CD with most available bios' that does the flashing for you as well, great tool.

revamped my system (finally scratched my upgrade itch..lol)

retired the p4c800-e and 30 capper northy.

new specs below, testing for higher speeds now, 4.2 stable on air vcore @ 1.4

will let you know what i come up with, one thing is these presler's love to OC.

Good god, 4.2 ... lol... what kinda temps are you seeing at that?

  • 2 weeks later...
  • 2 weeks later...
Neowinian

Sneakypoof

Posted
Posted

AMD Athlon 64 3000+ Venice

Max Bios stable so far = 3.015GHz

Max Windows stable 2.93GHz

Max load temps 36*C

Idle temps 25*C

Voltage at 1.45V

I'm keeping it at 2.56 until I get new ram

I have Corsair valueselect (512mb) at 233MHz (466) timings are

2.5

4

3

5

And a 1T command rate!

It's stable at 243 but with a lot looser timings and pumping 2.85V through it. So I'm keeping it a bit lower than that

My crappy 6200TC Overclocked to 467/714 from 350/550 not bad.

  • 3 weeks later...
Grand Master

jamend

Posted
Posted

CPU: AMD DC Opteron 165

Stock: 1800 MHz 1.35v

OC: 2610 MHz (9x290) 1.52v

Idle: 27 C

Load: 39 C

GPU: MSI Geforce 7900GT 256MB

Stock: 450 MHz GPU (1.4v)/330 MHz RAM

OC: 710 MHz GPU (1.55v)/450 MHz RAM

Idle: 41 C

Load: 50 C

RAM: OCZ Gold GX XTC DDR500 2GB Kit

Stock: DDR500 3-4-3-8 1T 2.8v

"UC": 4:5 237 MHz (DDR475) 3-4-3-8 1T 2.8v

Case: CM Stacker + crossflow fan

Cooling: Custom watercooling (Danger Den 2x BIP, TDX CPU, MAZE4 GPU, D5 Pump)

PSU: Enermax Whisper II 535W

MB: DFI Lanparty Ultra-D modded to SLI-D

Storage: 4x Samsung SP2504C in HW RAID 0 on Adaptec 2610SA (1 TB total)

Sound: Soundblaster Audigy

3DMark05: 11450

3DMark06: 5770

  • 2 weeks later...
  • 2 weeks later...
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • HWMonitor 1.64

      By Copernic · Posted

      HWMonitor 1.64 by Razvan Serea HWMonitor is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T, and video card GPU temperature. Special hardware monitors such as abit® uGuru and Gigabyte® ODIN™ power supplies serie are supported too. HWMonitor 1.64 changelog: Intel Arc G3 & G3 Extreme (Panther Lake). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). AMD Ryzen 7 7700X3D (Raphael). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). Support of HUDIMM and HSODIMM memory modules. New themes. New real-time graphs. Download: HWMonitor 1.64 | 3.4 MB (Freeware) Download: Portable HWMonitor 1.64 | 2.7 MB View: HWMonitor Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Visual Studio finally gets long-awaited feature that developers will love

      By SoylentGreenIP · Posted

      I have had a request since 2017 and so have many others that requested too and nothing has been done about it except its on our list to do.
    • Politically funny images of the World

      By PsYcHoKiLLa · Posted

      I think it might be behind the trailer park amusements?
    • Microsoft about to radically change how often your Edge browser updates

      By Accuphase · Posted

      Some people don’t like them but plenty more enjoy what they have to offer. Check the value of the company.
    • Nvidia's GeForce NOW summer sale drops prices for Ultimate and Premium memberships

      By AndrewSteel · Posted

      Not such a great deal, Ultimate, which gives you full 5080 features is $181.99 CAD per month, that's $2183.88 per year, I can buy the 5080 for $1809.99 CAD, then it goes up to $279.99 per month after the first billing cycle. Typical cloud rental, costs more than buying the hardware.

  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      172
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!