Recommended Posts

  • 2 weeks later...

I was happy to see that the Opteron 165 I just got was so strong.

Opteron 165 at 2.88ghz Prime Stable on air (1.4v)

Patriot 2 x 1gb ddr500 @ 240 3-4-4-8

DFI LanParty UltraD HTT @ 320

39c at Idle 56c full load

The bang for the buck with these guys (assuming a good stepping) is awesome. Dual core opty @ 2.88 for $230! I got it to boot into windows at 2.93 but barfed all over itself on prime95.

  • 2 weeks later...

DFI Lanparty Nf4 Ultra-D

3000+ @ 2.65 (295x9) 1.52v

512 Corsair PC3200 @ 221FSB (Gskill PC4800 Coming Soon)

33s Super PI Screenshot

I wish I could reach that on mine.......Though I've heard DFI Lanparty are really good mobo's for overclocking.

Mine is:

Shuttle AN51S/R

3000+ @ 2.28 (228x10) 1.52v

1024 GEIL PC3200 @ 228FSB

40?C Idle --- 55?C Load

I've tried everything from lowering my multiplyer(wouldnt even pass POST at 240 FSB with a 9x multiplyer). To adding a divider on my ram(divider was also used to attempt my 9x multiplyer).

I personally think its my board although with overclocking just about anything can affect it.

  • 2 weeks later...

my old lady

the classic overclock: Athlon XP2500+ ->Athlon XP3200+ (2.2Ghz), it's a Barton FSB200 (museum piece ... :p)

Mobo: gigabyte ga7n400 (nf2)

Cooler: Arctic Cooling Copper Lite (39 idle - 55 full load)

running like that for 2.5 years now, no problemos, whatsoever (overclocking shortens CPU life, yea right ... )

cheers

P4 Northwood 2.66GHz @ 3.0 on Air (Zalman 9500 cooler)

Asus P4P800 SE

FSB from 133 up to 150 - Higher caused my system to reboot in BF2 after roughly 2 mins game time.

Temps about 40 at load under BF2

Previous to that was:

P4 Northwood 2GHz @ 2.66 on Air (Gigabyte 3D cooler)

Asus P4P800 SE

FSB from 100 up to 133

Temps about 42 under load playing Source/CoD

Opteron 146 (2GHz stock clock) @ 2726.8 MHz, with 1mb (L2) local cache memory, which is double the amount that Athlon 64s had. It's basically very similar in functional spec. to an Athlon (Venice), other then that.

The performance per watt of those product s is poor, now, though, so I may get myself a laptop with a newer Intel processor at some point.

  • 3 weeks later...

http://valid.x86-secret.com/show_oc?id=126360

It's actually a Denmark core, CPU-Z has always displayed the core name incorrectly. Not entirely Prime stable, but I think that 21 hours is pretty good, I never let it go that long doing massive things anyway.

post-142764-1159742483_thumb.jpg

  • 1 month later...

Pentium M (745) 1.73 GHz :no: (Hi) - 800 MHz :no: (Lo)

1.356 Vcore @ x13 (Hi) - .988 Vcore @ x6 (Lo)

(133 MHz Bus) 533 MHz FSB (Hi, Lo)

1GB DDR @ 166 MHz (2.5, 3, 3, 7)

Bus: Dram - 4:5

~ to ~

Pentium M (745) 2.509 GHz :devil: (Hi) - 1.158 GHz :devil: (Lo)

1.356 Vcore @ x13 (Hi) - .988 Vcore @ x6 (Lo)

(193 MHz Bus) 772 MHz FSB (Hi, Lo)

1 GB DDR @ 241 MHz (2.5, 3, 3, 7)

Bus: Dram - 4:5

Courtesy of ClockGen by cpuid (the makers of CPU-Z) which alters the clocks without substantial hardware modifications, excluding excessive cooling for an HP laptop...

Pentium D 945 3.4Ghz running @ 4.0 Ghz, 1.3V, 55C full load. (Zalman 7700)

Asus P5WD2-Premium @ 944Mhz FSB

OCZ 2Gb PC6400 DDR2 Dual Channel Platinum XTC Revision 2 Edition (OCZ2P800R22GK) running @ just slightly below 800Mhz, 1.9V

send PM if you have questions ;)

  • 1 month later...

Opteron 170 (2ghz - Dual Core - 2x1mb cashe)

Currently running @ 235 - Defult vcore - 235*10

Corsair XMS PC3500 (BH5) @ 235 (1:1 with HTT) @ 2.9v

Shuttle SN21G5

===

Highest was:

AMD A64 3200+ @ 2850 (285*10)

Corasir XMS PC3500 (BH5) @ 255 (forgot ratio) @ highest board v (forgot that as wel)

ASUS A8V Dlx Rev 2

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • About bloody time. I have got PRs with hundred of files and the Web UI just struggling to even load the pages.
    • I wonder if it was applying secure boot certificates/dbx files?
    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      174
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!