List Your Overclocks

By Si
in Hardware Hangout

 Share

Recommended Posts

Grand Master

+dave164 Subscriber¹

Posted
  • Subscriber¹
Posted

I've done several decent ones in my time:

1st: AMD Opteron 165 from 1.8Ghz to 2.8Ghz using DFI Lanparty UT NF4 Ultra-D & 2GB OCZ Platinum DDR400 RAM

2nd: Current spec, E6600 from 2.4Ghz to 3.5Ghz. Specs in signature.

CPU-z, ignore the voltage in CPU-z, its wrong, look at the voltage at the top of the screen on ASUS PC Probe II.

Benchmarks for E6600:

SiSoftware Sandra Lite XI : 25525 in Arithmetic

Orthos stable for 5 hours+

1M SuperPi: 15 seconds

overclock35ws5.jpg

sisoftko1.jpg

pi1milionti4.jpg

Thanks,

Garnett

  • 2 weeks later...
Rising Star

Helba

Posted
Posted

Well I know them Core 2s are all the rage in recent times, but I've got an overclocked Prescott running happily in my machine.

I pushed it as high as 121% (or 3.4ghz) but it wasn't precisely stable at that. Also I'm on air cooling and my paste is not so great.

So I run it at 3.2ghz, a modest 114.2% clock. I've got my RAM clocked just under typical DDR rates with a 1.6 multplier.

No fancy-shmancy screenshots to hand out. Oh well!

  • 3 weeks later...
  • 2 weeks later...
Collaborator

kronix2

Posted
Posted (edited)

Core 2 Duo E6320 @ 3.01GHz (up from 1.86GHz). Temps: 40-44 degrees idle and 60 degrees load on both Tjunction and Tcase. Vcore: 1.44V.

Mobo: Gigabyte GA-P35-DS4. 430x7. Temps: 40-44 degrees idle, 50 degrees load.

RAM: 2x1gb GeIL Ultra PC2-6400 @ 430MHz, 4-4-4-12.

GC: 8800 GTS 640MB. 650MHz core (up from 500Mhz), 950Mhz memory (up from 800Mhz). Temps: 65 degrees idle, and I'm not sure about load temperature.

Stock cooling (yes, I will buy something better) and a lot of case fans.

Edited by kronix2
Grand Master

chconline Veteran

Posted
  • Veteran
Posted

Intel Core 2 Duo E6300 @ 3.36GHz (480*7, 1920MHz QDR) on Scythe Infinity+Resistor @ 900rpm (Asus P5K-Deluxe)

Idle 47, Load 58 (Noctua NF-S12-800 back, Noctua NF-S12-1200 ULNA @ 600rpm front) - Seasonic M12 in Thermaltake Aguila. 1.3750V, ~1.3V vdroop - Orthos stable.

Enthusiast

pckiller00

Posted
Posted

Here's my current setup, this is with my 2GB OCZ Platinum RAM:

http://valid.x86-secret.com/show_oc?id=210290

With my previous 1GB OCZ Performance RAM, I was able to OC the CPU to 2.7GHz Stable, of course with different mem clock, FSB, and HTT.

I can't get back to 2.7GHz with the 2GB kit, not sure why yet, don't have the time to attempt again

  • 2 weeks later...
Grand Master

revvo

Posted
Posted

Unlike most people here with Core 2 Duo's, I'll be yet another outcast with an AMD :p

My AMD Opteron 165 (stock 1.8ghz) is currently running at 2.57ghz on stock 1.35v vcore with a Tuniq Tower 120.

I think the temps are good because compared to stock speed, the load temp increased by just 2 degrees celsius.

idle temp: 39C

load temp: 51C with two instances of Prime95 running for 2 hours.

I'll run a 24h test the next day I'm working and if it remains stable, I'll push it a bit more. There's no rush :cool:

Mentor

12Iceman

Posted
Posted (edited)

Here are some more overclocks that I have tested stable for my system (All 8+ hours dual orthos stable):

Intel Core 2 Duo E6600 L638F615 on a Zalman CNPS9700LED @ 2300rpm

@ 3.0GHz (9 x 333 1.300V)

@ 3.2GHz (9 x 356 1.375V)

@ 3.3GHz (9 x 367 1.425V)

Asus P5N32-E SLI Plus Motherboard - Bios 0801

2 x 1GB Corsair XMS2 PC6400 TWIN2X2048-6400 @ 400MHz 4-4-4-12 2T 1.9V

PNY nVidia GeForce 8800GTS 320MB @ 675/1026 on stock cooling

Edited by 12Iceman
Mentor

12Iceman

Posted
Posted (edited)

New one :)

Intel Core 2 Duo E6600 L638F615 on a Zalman CNPS9700LED @ 2300rpm

@ 3.4GHz (8 x 425 1.4625V)

I just had to top the 3.36GHz that chconline got with only an E4300 and his beloved P5K Deluxe.

Edited by 12Iceman
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.