Recommended Posts

Well, I once get a 433Mhz celeron to run @ 466Mhz without touching core voltage... should I be proud of that? :D

And my old Duron 700Mhz can run almost @ 900Mhz, by increasing the FSB and core voltage changed from 1.6V to 1.85. But then the power supply gets pretty hot... :)

Too bad my recent Sempron system doesn't allow any other overclocking, than the memory clock (it's a crappy BIOS & mb). And even that makes no difference in mem clocks, cause the FSB is limited to 200Mhz. :rolleyes:

Edited by GLSii

My Opteron 165 is rock stable at 2.66ghz with the Tuniq Tower 120 and AS5. I didn't reach the maximum yet, I just stopped here at 2.66 so it could maybe do more, I'll find out when I'll have the time.

CPU-Z: http://valid.x86-secret.com/show_oc.php?id=220198

  • 3 weeks later...
Get bent Intel fan boys here is a realistic OC! When Intel gets real about real time speed then i'll beimpressed.

http://valid.x86-secret.com/show_oc.php?id=219948

Here ya go, my 80% OC beats your 50%, done with an Intel Core 2 Duo. Intel is clock for clock better than AMD at the moment :)

http://valid.x86-secret.com/show_oc.php?id=227625

CPU-Z Database (ID : 227625)

Submitted by Jonathan Kwan

Submitted on Sat, 11 Aug 2007 03:57:00 +0200 with CPU-Z 1.40

CPU : Intel Core 2 Duo E6300 (*1)

CPU Arch : 2 Cores - 2 Threads

CPU PSN : Intel? Core2 CPU 6300 @ 1.86GHz

CPU EXT : MMX SSE SSE2 SSE3 SSSE3 EM64T

CPU Cache : L1 : 2 x 32/2 x 32 KB - L2 : 2048 KB

Core : Conroe (65 nm) / Revision : B2

CPUID : 6.F.6 / Extended : 6.F

Freq : 3359.95 MHz (479.99 * 7)

----------------------------------

MB Brand : ASUSTeK Computer INC.

MB Model : P5K Deluxe

NB : Intel P35/G33/G31 rev 02

SB : Intel 82801IB (ICH9) rev 02

----------------------------------

RAM Size : 2048 MB

RAM Freq : 480 MHz

RAM Type : DDR2-SDRAM Dual Channel

RAM Ratio : 1:1

RAM Timings : 5-5-5-15

----------------------------------

Slot 1 : 1024MB (PC2-6400)

Slot 1 Manufacturer : OCZ

Slot 2 : 1024MB (PC2-6400)

Slot 2 Manufacturer : OCZ

ccpuzphppy5.png

On my motherboard (Gigabyte GA-K8N51GMF-9) the only overclocking features are Bus speed and Multiplyer, it manages the voltage on its own (makes things pritty easy). I'm using the Arctic Freezer64 Pro. First time i've ever fiddled with my processor too.

Athlon64 4000 SKT939 @ 2.83hz

CPU Temp under stress 46oc

CPU Temp idle 33oc

Edited by McDave

Well I have a dell so overclocking so I can't overclock my p4 (It would probably explode with this ****ty heatsink anyway). I have my 7600GS OC'd from 400/266(533) to 540/340 (680). The memory in the card is crappy and won't go much farther than 360 without bad artifacts, the core OC's like a dream though, very minimal increase in temperature.

  • 2 weeks later...

All I did was increase the vcore just a little, increase the FSB and voila! 3.55ghz and memory running at 888mhz 1:1 @ 4-4-4-12 . I was able to effortlessly reach 3.8ghz but had to raise chipset + vcore voltage and the speed increase wasn't worth the higher temps... :yes:

post-102022-1188614752_thumb.jpg

All I did was increase the vcore just a little, increase the FSB and voila! 3.55ghz and memory running at 888mhz 1:1 @ 4-4-4-12 . I was able to effortlessly reach 3.8ghz but had to raise chipset + vcore voltage and the speed increase wasn't worth the higher temps... :yes:

i got some catching up to do! havent had the time to thoroughly test anything higher atm.

check sig for results so far.

i got some catching up to do! havent had the time to thoroughly test anything higher atm.

check sig for results so far.

The RAM is probably holding you back, try running it @ 5-5-5-15, increase the FSB and see if it boots... Maybe you'll have to add +0.1v to the memory as well, make sure its within the ram voltage limits though, you dont wanna fry it :p

Also if you're using the stock heatsink, you won't reach as far...

  • 2 weeks later...

sorry for double post can't edit:

oc.jpg

I was actually getting around 500 points more before I updated a bunch of intel drivers... still a decent score for a vista pc

pc:

case: Antec Sonata III 500

mobo: gigbyte p35 ds3r

CPU: Q6600 g0 @ 3ghz

mem: 2gig kingston 667 (not oc'ed anyone know how much % performance I could gain if I oc'ed it?)

vid card: Foxconn 8800GTS OC edition 640MB

PSU: included with case, antec earthwatts 500watt

about 900 euro total this does not include a harddisk I still had one I could use. Next upgrade when money allows: physx card, another 2gb ram, raid setup.

Edited by Saito
  • 2 weeks later...
  • 3 weeks later...

currently running my old AM2 3200+ @2.7ghz / 1.45v with a passive OCZ Vindicator (getting around 51c @ full load with 27c ambient temp)

MSI K9N Platinum

4x512mb SuperTalent DDR667 @ 720mhz / 4-4-4-10 / 1.95v

Gigabyte 7300GT @580/950 w/pencil mod

yup, great stuff for a museum ^_^

  • 4 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
    • I guess we are done since you refuse to read my comment you replied to or my other comment in another thread you were also a part of here.
  • Recent Achievements

    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
    • Week One Done
      Markus94287 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!