List Your Overclocks

[Richard Hammond]

Core 2 Duo E5200 2.5Ghz 800Mhz FSB Wolfdale Based 45nm

Akasa 965 Cooler on an Nvidia 630i MATX Board

Overclocked to 3.33Ghz 1066Mhz FSB ram is unlinked and still running at 667Mhz

Temperature hasnt changed from stock 27-32 Degrees, under load 37-39 degrees.

Great budget overclockers setup.

[madhukarah]

Overclocked Pentium M 760 Dothan @2 Ghz to 2.53 Ghz

http://*malware domain*/show_oc.php?id=457232

[Konstanov]

Overclocked E6420 from 2.13 to 3.8, best budget processor with an 8x multiplier.

[wrewing73]

Overclocked my 4850e X2 from 2.5 GHz to 3.0 Ghz for now.

Overclocked my eVGA 8800GS to 600/1000/1455 for now.

[Lyric]

Intel E8400 C2D - (C0)

4.05GHz @ 1.269v (Temps under 64c, 12 hours Prime95, 2 cycles 3DMark06)

CPU-Z Validation: http://*malware domain*/show_oc.php?id=484937

PNY NVIDIA GeForce 9600 GSO (768MB)

Default (Stock): 575/1438/850

Overclocked (Stock Cooling): 641/1603/933

GPU-Z Validation: http://www.techpowerup.com/gpuz/6v26h/

Screenshot:

[BindyBoondyBa]

CPU: Intel Core2Duo E8500 @ 4372 MHz (460x9.5), Stock: 3.16 GHz (333x9.5)

Week, Code: Q827, A658

Stepping: A

Revision: E0

Voltage: 1.34v

Cooling: Air, TRUE Black + 1x120mm Antec Tri-cool fan

Mobo: DFI LanParty DK X48-T2RS, Bigby 10/03/08 BIOS

RAM: 4x 2gb G.SKILL Pi Black PC6400 (F2-6400CL4D-4GBPI-B), 460MHz, @ 5-5-5-15, 1.95v

OS: Vista Ultimate x64

Validated: http://*malware domain*/show_oc.php?id=491853

[darth_vader]

E2180 @ 2 GHz to 2.85 GHz

2 x 1024 MB GeIL @ 400 MHz to 428 MHz @ 4-4-4-12 v2.1

Leadtek 8600 GT @ 540/1188/1400 to 680/1500/1700

[Wazooty]

Simple Q6600 from 2.4Ghz to 2.64Ghz. If I got my hands on a nice heat sink/fan I'd like to take it to 3

[Lyric]

Intel E8400 C2D - (C0)

4.05GHz @ 1.269v (Temps under 64c, 12 hours Prime95, 2 cycles 3DMark06)

CPU-Z Validation: http://*malware domain*/show_oc.php?id=484937

PNY NVIDIA GeForce 9600 GSO (768MB)

Default (Stock): 575/1438/850

Overclocked (Stock Cooling): 641/1603/933

GPU-Z Validation: http://www.techpowerup.com/gpuz/6v26h/

Updated

Processor: E8400 @ 4.21 GHz @ 1.360v

Stepping: C0

Week / Code: N/A

vCore: 1.360v (idle) & same under 100% load, doesn't budge.

CPU Cooling: Zalman 9700 LED

Motherboard: GA-EP45T-DS3R - BIO's Version: F2 (Released - 06/18/2008)

Operating System: Windows Vista SP1 Home Premium (32bit)

RAM: Patriot 1066 DDR3 PC3-8500 (2x 1GB Sticks) - Manual Set Timings: 7-7-7-18 (1:1 FSB:RAM Ratio) 2.00D Multi.

CPU-Z Validation: http://*malware domain*/show_oc.php?id=494852

GPU OC: PNY NVIDIA GeForce 9600 GSO (768MB)

Default (Stock): 575/1438/850

Overclocked (Stock Cooling): 700/1750/950

GPU-Z Validation: http://www.techpowerup.com/gpuz/8vsnh/

Screenshots:

[Skulltrail]

X2 3800 @ 2.5ghz (10x250 1T 2.5-3-3-7)

Exactly my OC.

[randb]

Gigabyte GA-M61PME-S2

AMD Athlon LE-1640 1 mb cache BOX@2,815 MHz

2x2 GB DDR2-800 Kingston@402 MHz

Nvidia GeForce 6150SE 256 mb

ST3320613AS 320 GB 7200 rpm SATAII

CODEGEN ATX-3331-CA, 400W, USB, Audio

Nothing special, because from my motherboard can not change cpu voltage and after 217 Mhz bus speed the bios tell me that i need to reduce bus speed and the PC won't boot. I will test this night on orthos on small FTTs, priority 9.

[b10h4z4rd]

MB: Asus M2N

Processor: AMD Athlon 64 X2 5000+ Black Edition

Core : Brisbane (65 nm) / Stepping : BH-G2

Freq : 2913.54 MHz (200.93 * 14.5)

GPU Type : GeForce 8800 GT

GPU Clocks : Core 600 MHz / RAM 900 MHz

DirectX Version : 10.0

RAM : 2048 MB DDR2 Dual Channel

RAM Speed : 364.2 MHz (CPU/8) @ 5-6-6-18

CPU-Z validation

[b10h4z4rd]

Updated

MB: Asus M2N

Processor: AMD Athlon 64 X2 5000+ Black Edition

Core : Brisbane (65 nm) / Stepping : BH-G2

Freq : 2965.37 MHz (204.51 * 14.5)

GPU Type : GeForce 8800 GT

GPU Clocks : Core 610 MHz / RAM 900 MHz

DirectX Version : 10.0

RAM : 2048 MB DDR2 Dual Channel

RAM Speed : 370.7 MHz (CPU/8) @ 5-6-6-18

CPU-Z validation

[Lyric]

updated. :D

[Robbie Khan Reviews]

Here we go!

Changed my Asus P5KC for a Gigabyte EP45-UD3P rev 1.1 and can now take my Q6600 (1.325vid) from 3.1GHz to way beyond depending on how I like my temps.

At 430fsb I get:

Not bad with just a few voltage tweaks!

[+KibosJ Subscriber²]

I got it running stable at 3.0GHz, it ran an Everest stability test all night and didn't fail.

It Bluescreened on 3.2GHz this morning so I've increased the Voltage a little bit. How high can I/should I take the voltage on this thing?

Voltage is currently at 1.4v

http://*malware domain*/show_oc.php?id=597717

[freeza]

UPdate

[marc2003]

i must be the only person on neowin slumming it with a single core celeron. :D

but a 100% overclock isn't too shabby and it's capable of running 64bit windows so it's a good enough stop gap until i get something better.

[Robbie Khan Reviews]

Processor: Q9550 @ 3.825 GHz (450x8.5)

Stepping: E0

Week / Code: N/A

vCore: 1.28

CPU Cooling: Thermalright Ultra 120-A + Akasa 120mm Green @ 60% 24/7 - Temps are shown below

Motherboard: GA-EP45-UD3P v1.1 BIOS Version: F10e (latest beta)

Operating System: Windows 7 Professional Retail x64

RAM: 8GB G.Skill PC8000 @ 900MHz (1:1) @ 5-6-6-18 (Model F2-8000-CL5-2GBPQ)

CPU-Z Validation: http://*malware domain*/show_oc.php?id=684137

Screenshots:

4GHz+ is completely possible but I need PC8500 memory for this as my GSkill in 8GB config does not like running at it's EPP mode of 1GHz.

[Hani]

http://www.techpowerup.com/gpuz/3dvby/

GPU Clock: 625 MHz 475 MHz 1425 MHz

Default Clock: 475 MHz 400 MHz 950 MHz

Overclock: +32% +19% +50%

[strekship]

Not a huge overclock, but enough to show a noticeable improvement over stock performance.

http://www.techpowerup.com/gpuz/7fqd2/

[OldManMouser]

AMD Athlon 6 X2 5600 stock 2.8 OC @ 3.22

[ROM3000]

First time overclocking! :)

[TokiToki]

Wow, 1V @ 3.65GHz. (Y)

[Hani]

First time overclocking! :)

did you test the voltage? Try this. If Linx produces errors then the voltage is low.