Recommended Posts

:laugh:

Today I had my first encounter with a police officer regarding what he thought was a traffic violation. Every single day on the way home from my office I drift or powerslide in my Bimmer across one specific intersection. It is a left-hand turn and when the light turns green I have 5 lanes to prepare for the drift (the oncoming traffic lanes) and another 5 lanes to actually drift and the tarmac is very nice. Keep in mind I do need all that space since I drive a 5-Series and after all it is a big and heavy car, definitely not as nimble as a 3-Series. Since I do this every day I've perfected it, and I can drift beautifully across that intersection.

Today was no exception. As I approached that intersection I routinely turned off traction control and put the car in 1st gear (I do this without thinking now). I drifted perfectly and even got smoke from the tires, and then drove calmly as a law-abiding citizen. What I didn't see was that there was a cop 300m ahead of me and he didn't seem to appreciate it as much as I did. He pulled a U-turn to stop me and the conversation went like this:

Me: Hello officer, is there a problem?

Cop: Why are you in a hurry?

Me: I'm not

Cop: Then why were you going so fast?

Me: I wasn't driving any faster than the speed limit

Cop: I saw you drive through that turn completely sideways, and there was smoke.

Me: I don't see the problem.

Cop: You could have hit another car driving like that.

Me: That's true, but I didn't. Everything was under control.

Cop: Didn't they teach you that you shouldn't do that when you got your license?

Me: They never said anything about drifting through an intersection, I've even studied the state and city traffic laws, where is it outlined?

Cop: It just is. Don't do that again. (leaves)

It was a damn good drift too, he noticed it from 300m away!

This isn't the first time I was seen by a cop but the first time I've been stopped. The last cop that saw me gave me a thumbs-up.

I need to get someone to record a video of these drifts, I wonder how awesome I look. :D

Link to comment
https://www.neowin.net/forum/topic/402052-caught-drifting/
Share on other sites

yeah and what if you did hit some one!, it could have happened that same day it might happen next time you do it.

keep the drifting to the race track and video games. id be mighty ****ed off if you had hit my car while you were drifting.

it might not be outlined in the trafic laws but it friggin should be.

i wounder how awesome you would look in court after you have hit some one else.

lmao, be carefull man, you should get a cam and mount it (tape it) to your dash and record it someday. i'd really enjoy seeing it.

"Cop: I saw you drive through that turn completely sideways, and there was smoke." I bet that made you feel like a bad*** :thumbs up:

But seriously. Be carefull with doin stuff like that on the open roads. :yes:

lmao, be carefull man, you should get a cam and mount it (tape it) to your dash and record it someday. i'd really enjoy seeing it.

586852960[/snapback]

I want to mount a camera to the hood or bumper of my car. The lower to the ground and exposed to the environment the scarier the video will be.

I drift a 1990 325i like protomor.

we both do events in VA.

I tend not to try to drift in public for fears of accidents and cops.

I have been tempted to do it in the rain late at night (2~3AM)

that way there are less cops and traffic and lessens my chance

of getting in trouble.

I do admit though a situation like yours, Huezo, you got luckey.

I would like to slide a 5 series, but thats a lot of weight to toss around!!

i drift my 3 series around town only late at night and when its wet.?

ive gotten a couple of reckless tickets for doing it in parking lots and

once on the street in broad day light

586853009[/snapback]

I drift and do donuts at the mall parking lot whenever I get a chance. I haven't received any complaints so far, but then again my car looks identical to that of the owner of the mall.

These BMW vehicles just invite the driver to drift them, it all happens so naturally.

In court? This is Mexico we're talking about. :rofl:

586852956[/snapback]

Lol, I know what you mean, here a friends of mines and I were driving and passed a red light, the police stopped us and threatened me to take the car ( I didnt have my license yet and in those cases they take the car to the precint and make your parents pay a ticket ) bu we gave him 500 pesos and he was like alrite alrite go go go :ninja: :laugh:

i drift my 3 series around town only late at night and when its wet. 

ive gotten a couple of reckless tickets for doing it in parking lots and

once on the street in broad day light

586853009[/snapback]

i've gotten approached because of drifting in a parking lot, the officer asked what i was doing and i explained that i was just practicing drifting and that the chances of me hitting anything were very slim (it was in winter at about 3 am in an empty parking lot. the officer just told me to be careful and then left

If that was your dialog, you come off as being extremely arrogant to the police to me.

So, what model and variant 5 series do you have?

586853456[/snapback]

Yeah, I know. I would have been nicer but I was a bit annoyed/nervous because I got stopped for the first time.

Its a 525iA E39, the last revision with the angel eyes. Its a little difficult to get the power out of the 2.5L I6 in such a big car with an automatic transmission but its possible with the torque converter locked.

Lol, I know what you mean, here a friends of mines and I were driving and passed a red light, the police stopped us and threatened me to take the car ( I didnt have my license yet and in those cases they take the car to the precint and make your parents pay a ticket ) bu we gave him 500 pesos and he was like alrite alrite go go go  :ninja: :laugh:

586853085[/snapback]

Haha that's awesome.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!