Recommended Posts

I agree your an idiot. To break the law by sliding your car, and then trash talking a cop to come post it here on the forums. Your an attention ######, hence the Series 5.

I would have arrested you for wrecklace driving.

586853777[/snapback]

lol i would love to see the ticket that says wrecklace on it

:rofl:

i have a 97 galant and ive done a few "donuts" but nothing real big since its FWD... i plan on getting something RWD/AWD when i graduate high school

OK I didnt see you were from Mexico. I have no idea about laws in Mexico, however you do that in the states and its called Wreckless driving, yes I spelled it wrong above, however you get thrown in jail for that type of crap.

I'm also very biased againt people pealing out, and sliding sideways in his car because my 12 year old sister was killed by people just like who care about nobody but there selves on the road.

If your eating, talking on a cell phone, changing the radio, or sliding your car like jeff gordon, then your not driving the car and putting others at risk. Just think.

@Sub: sorry to hear about your sister, that's awful.

...

@Everyone else: Don't forget he said he was in first, under the speed limit, on a 10-lane road (if i understood correctly).

A BMW is a performance driving machine, and in the hands of a skilled driver, it can be driven much more enthusiastically than your typical corolla while still maintaining complete control of the road. Just be smart about it, and don't put anyone in jeopardy.

A BMW is a performance driving machine, and in the hands of a skilled driver, it can be driven much more enthusiastically than your typical corolla while still maintaining complete control of the road.

586853948[/snapback]

god damn that makes me love my e30 even more :heart:

IMO You should have been fined. What if you did hit someone? Its not outlined in any laws as they assume, with common sense, your not going to do such a thing...What if you'd lost control?

You need to have a good think about things. Your obviously a bit of a showoff. Showing off is ok, but when it goes wrong you've got a fairly heavy weapon which could take a few things or people out.

we need a video.

btw, i used to do that in my 1997 astro van through this one intersection... talk about a lot of weight to throw around, eh? but i was 17 at the time... what's your excuse?

i can appriciate a good drift, and i can appriciate being a total dick to a cop and getting away with it. i get pulled over all the time for stupid stuff and i dont even drive fast anymore. its always equipment violations and stuff like that.... no front plate, exhaust too loud, exhaust emits flames, illegal intake modifications, yada yada.

i really want to see a video of this or at least some pictures.  im interested to see how good this guy is.

586855733[/snapback]

Please don't cheer this attention seeking nub along.

Anyway, be careful bro. I dont blame you doing it, it gives your body a rush. But one day you might miscalculate it and loose control.

Yeah, and kill somebody. Maybe a family. Maybe some kids.

Mexico + Laws = Sike

Anyway, be careful bro. I dont blame you doing it, it gives your body a rush. But one day you might miscalculate it and loose control.

586855767[/snapback]

The adrenaline rush is awesome, I feel like god.

I have lost control before, I've hit patches of sand and spun out, ended up facing the opposite way on the road and close to hitting trees and other things on the side of the road. That was in residential areas though and I don't do that anymore, it was scary. This intersection I drift at is a lot safer as there are 9 lanes and all other cars are completely stopped, even if I did spin out I would be far from hitting anything since I do it in 1st gear. I try to be careful about where I drift nowdays.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!