A How To guide: Upconverting video using FFDShow


Recommended Posts

First off, most of this guide is taken from here although I changed some parts to make it a little better :)

First, make sure you have the latest FFDShow, just Google it.

Now, open your FFDShow config box, by going "Start > All Programs > ffdshow > Video Decoder Configuration"

18gq.jpg

Now, you need to make sure that the filters you are using are top priority.

Select "Blur & NR," from the list down the left, and hold the mouse down on it, and drag it up the list as far as it will allow.

22yv.jpg

Now, do the same for "Resize & aspect," so that it is just below "Blur & NR"

34vq.jpg

Now that they are where they should be, lets configure!

To start, click the box next to "Blur & NR" on the scroller on the left side.

Second, you will want to click the box next to "denoise3d" at the bottom of the config page.

Then, you will want to slide the first two sliders so they are both at "7.00"

Slide the last slider so that it is at "5.00" and tick the box that says "HQ"

48kv.jpg

Now, to change the "Resize and aspect," settings.

Again, click the box on the scroller on the left side that is next to "Resize and aspect."

Then, in the config window, click the option to have a "specific size." and enter in there what ever resolution you want. (I'm using 1280 x 720 [720p] for this example, although if your screen and CPU can support, 1920 x 1080 [1080p] would look awsome! And some people like to use 1440 x 960 as it is double DVD resolution)

Also, make sure that on the bottom of the configuration page, the aspect ratio changer is set to "No aspect ratio correction"

52nv.jpg

Next, go to the "Settings" tab just under "Resize and aspect."

There, in the drop down menu next to "Luma method" choose Lanczos. (You can change this if playback is too slow, if you prefer another method)

On the slider directly to the right, set "Parameter" to 10.

And set both "Luma sharpen" and "Chroma sharpen" to 1.50 each.

Now, click "Apply" and then "OK" to save your settings.

60cd.jpg

Now to test, open a video that uses FFDShow to decode, and see the quality difference!

Here are some examples, from Prison Break 1.01, Victoria's Secret Fashion Show 2005 and the intro scene of "Cache," a French movie.

(NOTE: All pictures are taken from same source [resolution at 640 wide], with the one on the left being original, the on the right being upconverted)

pborig.th.jpg pbupcon.th.jpg

vicsorig.th.jpg vicsupcon.th.jpg

snapshot200604181645482od.th.jpg snapshot200604181645366bo.th.jpg

Edited by Gabnoj
  • 10 months later...

if you've never done this before you also have to click on "codecs" .. go all the way to the bottom, select "raw video" and change it to "all supported"

If you want to test to make sure it's working you can tick "OSD" which will display an on screen FPS dialog while the movie is playing so you know it's working.

I play mine with media player classic.

Happy upconverting!

  • 1 year later...

I was looking for an alternative to WinDVD9's Upconverting DVD feature (the buggy WinDVD9 stopped working inadvertently-no surprise there) , and luckily found this!

I applied the steps last night in ffdshow through ZoomPlayer and the results are great!

I'm currently playing back at 1920x1080P now (although 3360x2100 looks even better with a slight increase in CPU resources).

This method has breathed new life into my DVDs!

  • 1 month later...
  • 5 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Start menu is a defining UI element that made Windows, well, Windows. naturally people will be worked up to any changes it receives.
    • I believe voice assistants have reached a dead end in terms of usability. You can only do so much with voice. Even Google is sidelining Google Assistant for Gemini. Once you can no longer shoehorn "AI" everywhere, the industry will move on to the next fancy trend try to push voice assistants to use that tech.
    • Gemini in Google Sheets can now generate fully editable charts by David Uzondu Back in January, Google introduced a feature in Google Sheets powered by Gemini that lets you ask the AI to create charts from your data. The problem was, these charts were just static pictures, slapped on top of your cells. You could not edit them, and they would not update if your data changed. Now, the company has upgraded the feature so you can edit the charts however you want, plus they stay synced with your data as it changes. The process is quite straightforward. You use the Gemini side panel and just type what you want, like "create a bar chart showing campaign performance by market." Gemini then builds the chart, and when you insert it, the chart appears in a completely new tab within your spreadsheet. From that new home, you have total control. You can change the title, tweak the colors, and adjust all the little details just like any normal chart you would build yourself. It is not a completely perfect system, however. The biggest catch is that the editable chart is linked to the data in that new tab, not your original data source. So if you want the chart to reflect new numbers, you have to update the data in the chart’s dedicated tab. This is a bit of a weird detour from how standard Sheets charts have always worked, where they update directly from the source cells. For certain, more complex chart types, Google also notes that Gemini might still fall back to spitting out a static image, so your mileage may vary. The full rollout began recently, with Google expecting it to reach everyone within one to three days. This update is available for a bunch of Google Workspace accounts, including Business Standard, Business Plus, Enterprise Standard, and Enterprise Plus. It is also included for anyone with a Google One AI Premium plan, which the company has since renamed to Google AI Pro and Ultra. If you are on one of the old Gemini Business or Enterprise add-ons that Google stopped selling back on January 15, 2025, you get this feature too. Just make sure your admin has the "Smart features and personalization" setting turned on, or none of this will work.
    • iOS feature updates are lacklustre. I know it’s difficult with a mature OS, but imagine the announcements without Liquid Glass. Pretty thin.
  • Recent Achievements

    • Week One Done
      IAMFLUXX earned a badge
      Week One Done
    • One Month Later
      Æhund earned a badge
      One Month Later
    • One Month Later
      CoolRaoul earned a badge
      One Month Later
    • First Post
      Kurotama earned a badge
      First Post
    • Collaborator
      Carltonbar earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      268
    3. 3
      +FloatingFatMan
      237
    4. 4
      +Edouard
      201
    5. 5
      snowy owl
      162
  • Tell a friend

    Love Neowin? Tell a friend!