satishsays.com Posted June 7, 2006 Share Posted June 7, 2006 (edited) The demands of the Silverstone circuit for the cars and engines has changed significantly in 2006 thanks to the advent of V8 engines and the return of tyre changes. The first half of the circuit, all the way to Turn 8, now sees very little braking at all and the engines under prolonged load. The second part of the circuit includes more slow corners, and places a premium on a good low speed balance and traction. Overall, Silverstone is a selective circuit that allows a strong, harmonious chassis-engine package to shine, as Renault explain… Aerodynamics: Downforce levels at Silverstone are medium-high - almost identical to Barcelona. The downforce is required for the quick corners in the opening part of the lap, and the relatively short straights and braking zones mean that any deficit in straight-line speed is unlikely to see competitors overtaking you. The lack of heavy braking also means we run some of the smallest brake ducts of the year to optimise aerodynamic performance. Ride: The circuit is not particularly bumpy, so achieving good ride is not usually a big problem. The exception to this is under braking for turn 8, where the uneven surface can unsettle the car. The drivers also tend to drift out onto the kerbs exiting the quick corners in order to take the fastest line, which can make the circuit seem bumpier than it is. Suspension: We run the car with a forward mechanical balance at this circuit - essentially, with a stiff front end and softer rear end. The stiff front gives the car a good change of direction in the high and slow speed corners, while the softer rear end gives better grip under traction, exiting turns 9, 11 and 16 in particular. Tyres: The numerous high-speed corners mean Silverstone is a demanding circuit for the tyres, as they work hard over a lap. However, the difference compared with a circuit such as Barcelona is that none of the high-speed corners are particularly long. In general, if temperatures are cool and tyres are graining then the left-front will suffer in particular, while in higher temperatures, the left rear will be the limiting tyre. Ambient conditions: As a former airfield, Silverstone is inevitably exposed to the wind - and this can have a big impact on car performance. Gusting wind alters the aerodynamic balance of the car and makes handling unpredictable, particularly in the high-speed corners. The driver must be able to judge the direction and strength of the wind, and adjust his driving accordingly. Engine: The percentage of the lap spent at full throttle has climbed significantly with the advent of the V8 engines - from 59% last year to 71% this. Silverstone is now one of the harder circuits in terms of the demands it places on the engine, which also needs to be responsive at high revs as the drivers take the quick corners on either full or partial throttle. However, by race 8, issues such as cooling are well under control and, particularly after having already tested at the circuit, will pose no problems. Source Edited June 8, 2006 by devilhead_satish Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/ Share on other sites More sharing options...
Martyn Posted June 7, 2006 Share Posted June 7, 2006 Source: http://www.formula1.com/race/news/4459/758.html Stop copying and pasting articles from the net and posting them here, or at least if you do give them a source and maybe write your opinion or something. Sorry...it just annoy's me. Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/#findComment-587581537 Share on other sites More sharing options...
dannyscott5 Posted June 7, 2006 Share Posted June 7, 2006 Source: http://www.formula1.com/race/news/4459/758.html Stop copying and pasting articles from the net and posting them here, or at least if you do give them a source and maybe write your opinion or something. Sorry...it just annoy's me. because you think he is pretending to be a genious? :p Thanks for info man i love F1 watch all the races too :) Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/#findComment-587581961 Share on other sites More sharing options...
Kerm Posted June 7, 2006 Share Posted June 7, 2006 Thanks for posting, interesting read. I disagree with Martyn. Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/#findComment-587581978 Share on other sites More sharing options...
satishsays.com Posted June 8, 2006 Author Share Posted June 8, 2006 I am extremely sorry for not posting the source. Completely forgot. Happened for the first time. I like watching races on Silverstones circuit. The surface is right rough and quickly hastens tyre wear. Lets see what happens in the race!!! Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/#findComment-587584364 Share on other sites More sharing options...
Shibby Posted June 8, 2006 Share Posted June 8, 2006 This race will be good if the demand on the engine is so high! I bet Kimi engine blows ups, normaly does the unlucky fella Link to comment https://www.neowin.net/forum/topic/467717-silverstone-the-technical-requirements/#findComment-587584798 Share on other sites More sharing options...
Recommended Posts