Forceware 91.31 WHQL released


Recommended Posts

what is MCE?

there are two folders for the 91.31 drivers

MCE dated june 22nd 40.34 MB

ftp://download.nvidia.com/Windows/mce/91.31/91.31_winxp2kmce_english_whql.exe

and just 91.31 dated june 5th 32.15 MB

ftp://download.nvidia.com/Windows/91.31/91.31_forceware_winxp2k_english.exe

I downloaded and installed the larger mce version because that's what was given through the website.

first I get a nag that I don't have SLI and I should go learn more about it.

I never had SLI ever, so how could I remove one?

so I unchecked "don't show the tray Icon" anymore to see if the nag would go away, and rebooted.

now back at the desktop the tray icon loads and the nag appears twice, so I rebooted again, BUT the computer won't boot now. all it does is just sit and spin at the boot screen. I pressed the reset button, and now I get the your computer is screwed and you can boot into safe mode, or try normal windows again.

I tried normal windows again, but got the same thing. all it would do is just sit at the boot screen but no hard drive activity.

I pressed the reset again, and tried the load the last know good config link, but still got the sit and spin bootscreen.

I was worried, and tried safe mode, and uninstalled the graphics drivers, but still couldn't boot. again just sit and spin.

booted to safe mode again, and this time installed 91.28 drivers which I keep the install files in the windows dir.

FINALY I'm back to the desktop. the tray icon is there but the nag is gone thank god.

91.31 are the worst drivers I have ever seen.

what do they expect that everyone is going to run out and buy another graphics card so they won't be nagged that they arn't running two cards anymore?

THIS IS BS. I paid alot of money for my one 7800 GT, and can't afford to just go out and buy another one just so I won't be nagged like that :angry:

and what was the deal with not letting me get to the desktop? Is that part of the you don't have SLI, so go buy another card and your computer will boot fine?

The last working NVIDIA Graphics Driver

91.28

ftp://download.nvidia.com/Windows/91.28/

how do you spell you don't have SLI nag relief? ATI?

Edited by fr33k

.......

MCE = MediaCentre Edition

the drivers say 'xp2kmce' which means they are compatable with MCE, XP and 2000.

If you are that bothered about getting a SLi msg each time you turn your computer on, use older drivers....its not nagging you to go out and buy another one, it is just letting you know SLi has been disabled, its a bug jeez.

Someone mentioned a way to stop it from poping up, did you try it?

-

I'm currently on 91.31beta's from nvzone, think i will stick with these seeing as the only difference is that these are whql'd.

Wait a few releases. They'll get it right. At least they're not hogs like ATI's new panel. Also unlike ATI it's a bloody good thing that they let you use the much-preferred old panel. T'was the reason I upgraded my X800 to a 7900 GT TOP Edition. Stupid ATI drivers... *grumble grumble*

Hi GenesisOmega

Thank you for the reg key, but after not being able to boot untill I installed the older 91.28 driver overwriteing the newer 91.31. I have no plans on installing any new nvidia drivers soon. The nag popup was bad enough to roll back, but the boot problem scared me :|

for those who arn't having boot problems use the reg key so you don't feel the hate.

and lets all hope this isn't a new trend

wga notify nag: you're a pirate

nvidia notify nag: you don't have SLI

Yeah, I uploaded the reg file here

Thanks (Y)

These drivers are running good for me, except the popup about SLI which I will use the reg key provided above to remove it. Nonetheless, the new control panel is not of my liking so I changed it back to classic.

Wow, this is the worst release ever of nv's drivers IMO

The new control panel is horrible, i cant find anything and the layout is ugly and very annoying.

The stupid SLI pop-up is annoying and pointless, and for some reason , whene i hook up my TV

so i can watch a movie from my pc , it stretches the picture to fit the TV screen, something that

the former drivers didnt do, and i can't seem to find an option to change that (i want it to display

the original aspcet ratio) :blink:

Wow, this is the worst release ever of nv's drivers IMO

The new control panel is horrible, i cant find anything and the layout is ugly and very annoying.

The stupid SLI pop-up is annoying and pointless, and for some reason , whene i hook up my TV

so i can watch a movie from my pc , it stretches the picture to fit the TV screen, something that

the former drivers didnt do, and i can't seem to find an option to change that (i want it to display

the original aspcet ratio) :blink:

Post 39: https://www.neowin.net/forum/index.php?show...#entry587636488

So wait, this SLI popup box is only for those who aren't running SLI? Or is it happening for people who are? I have SLI and I'm wondering if it will affect me.

Its happening for non-SLI members because they don't have SLI running so I assume it won't show up for you since you are in SLI mode.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It STILL has horrid theme support. Hard to look at for me. The white is too bright, and the black too dark. I'm using classic outlook for the Dark Grey theme. It's just right for me.
    • inb4 someone leaves the usual "what an unfortunate name" comment
    • Cuktech 10 Ultra charger review: big display, four ports, 110W total power by Taras Buria Cuktech recently announced a couple of Ultra-branded chargers, including a desktop 300W charger, which I reviewed a few weeks ago. For those who do need that much (or who do not want to spend that much on a charger), Cuktech also offers the 10 Ultra, a traditional wall charger with similar features. Four ports, a big display, and up to 110W of power output. After using it for a few weeks, here are my impressions. Disclaimer: Cuktech provided the review unit without any editorial input or pre-approval. Like the 30 Ultra, the 10 Ultra arrived in a box made of nice cardboard with quality print all over it. Inside, besides the charger, you will find a 240W 6A charger, which, this time, is fully braided. While Cuktech always bundles high-power cables with its chargers and power banks, they are usually regular and unassuming. This time, the cable is much nicer, matching the charger's $59.99 price tag. The charger itself measures 67 x 76 x 33 mm or 2.6 x 3.0 x 1.3 inches and weighs about 250 grams. Considering the charger has four ports and a big display, I would say the compact size is quite impressive, albeit a little hefty. The overall design is similar to other chargers from the manufacturer, minus the chrome Cuktech logo next to the four ports. The Cuktech 10 Ultra has retractable prongs for better portability. Its front side is covered with piano black plastic housing two elements: a capacitive button with backlight and a quite large display for various charging stats. Ports are downward-facing, and I have mixed feelings about such a design. It is not the most convenient when you frequently connect and disconnect cables. It makes you bend over to find the right port to connect, and it is a no-go with outlets mounted closer to the floor. On the bright side, design like this eliminates clutter and sagging, especially when using four cables at once. Plus, you get plenty of space for a big display. Ports include two high-speed USB Type-C ports, one Type-C for less demanding devices, and one classic USB Type-A. The first two ports deliver full 100W, while the third is capped at 45W. As for the Type-A port, its maximum output is 18W. In total, the charger delivers 110W of power, but in my testing, I managed to squeeze 117W when charging two power banks and a tablet. Quite impressive. Type-C1 Type-C2 Type-C3 Type-A Single-port 100W 100W 45W 18W Two ports 80W 20W - - Three ports 65W 20W 20W - Four ports 65W 20W 10W 10W The charger can detect handshake protocols and balance power across all four ports according to each device's needs. As such, power is not limited to the values in the table above. You can have two ports charging at 55W, three ports at 45W + 20W, and more. For some reason, Cuktech is not listing the supported protocols, but a quick test showed that it is compatible with PD3.0, PPS, QC5, DCP, and UFCS. When you connect a compatible device, the charger automatically detects its charging standard and displays it on the screen, for example, Apple 6A or Samsung 3A. Speaking of the screen. The main highlight of the 10 Ultra is its 1.57-inch display with a maximum brightness of 700 nits and 160-degree viewing angles. The display takes up most of the front, and it shows various charging-related information, including total output power, current temperature, power distribution across ports with watts, volts, and amps, a screensaver, and more. You can toggle between the different views by tapping the button, and holding it changes the screen orientation (portrait or horizontal, plus flipped) according to your socket position. The screen is very nice. It is sharp, vivid, and the fonts are easy to read. As for settings, you can change the following: Keep the screen on or off Lock the screen orientation (hold the button to change the screen orientation) Keep the USB Type-A port on Toggle power modes The charger has three power modes: AI: standard mode that automatically allocates power to each connected device. Power Priority: prioritizes power for high-demand devices, such as laptops or power banks. Balanced: splits power evenly across connected devices according to their needs I was skeptical at first, but after testing a few devices in different modes, I can see the benefit of these three modes. The most useful is power priority, which gives the first Type-C port more power. When I was charging a 100W power bank (port 1) alongside a 140W power bank (port 2), Power Priority split the total output about 75-30. Balanced mode, as the name suggests, splits the total output between the two ports more or less equally. As for AI mode, the charger uses its brain to detect which device needs more power. In my testing, it figured out that the 140W power needs a bit more juice. As I said, I expected this to be more of a gimmick, but the three built-in modes turned out quite useful. For example, you can prioritize your laptop while giving other ports a little less power, but still enough to charge at acceptable speeds. Unfortunately, unlike the 30 Ultra, this charger cannot display the battery level of the device being charged. This small feature turned out to be very useful when I was testing the 30 Ultra, as it allowed me to see my phone's battery level without picking it up. Like other Cuktech chargers I tested, the 10 Ultra one proved itself reliable and well-made. It uses Gallium nitride semiconductor technology to reduce the charger's size and improve efficiency. It is also better at dissipating heat, but I have to say that when charging two power banks at 117W total, the charger got hotter than what I would call comfortable (hold it for a few seconds, and you start feeling a burning sensation at your fingertips). However, the built-in thermal indicator remained below the temperature threshold, with the screen reassuring that the device operated at "High performance" (I tested it in a 21 °C / 69 °F room). Overall, the Cuktech 10 Ultra is a solid choice. If you need four ports and you like to nerd out on various stats, it is a very easy recommendation. It will take care of your laptop, phone, tablet, and power bank without breaking a sweat, plus the build, material, and cable quality are top-notch. The mode switcher is handy when charging different devices with different power needs, too. I cannot say a display is a must-have in a charger, especially when it makes you more conscious about where to plug it, but it is a neat addition if you have a socket at your table or bed level, so that you can actually use the display and its features. The more important fact is that despite its size and quality, the display does not make the charger that much more expensive than similarly powerful chargers from competitors. Plus, you can save 10% on the 10 Ultra with a promo code on Amazon. Buy Cuktech 10 Ultra charger - $53.99 on Amazon with a promo code As an Amazon Associate, we earn from qualifying purchases.
    • Last week I was investigating an issue with contacts and tried using the new Outlook. In the real (Classic) Outlook, you can easily go to any Outlook folder and present it in a Table View, then customize the columns to show/sort any field, which was exactly what I needed. But of course, the new Outlook doesn't have this feature at all. I gave up. Oh, and can we possibly stop claiming the new Outlook has PST support? What it really has is the ability to use the real Outlook in the background to pretend to have PST support. There is no PST support without the real Outlook installed.
    • Honestly just before Panos left it started to feel like MS just wasnt interested in them so they were being less innovative with them, and then when he DID leave for Amazon its kind of clear the direction is gone. It felt like Panos had both goals and drive, and a vision, but it felt like no matter what his title/department was the Surface devices never had the full interest of the rest of management and he was just pushing a bolder up a hill that MS was adding dirt to as he went.
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      76
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!