Recommended Posts

So they no longer support the

* Radeon? 7500 series

* Radeon? 7200 series

* Radeon? 7000 series

* Radeon? 9250 series

* Radeon? 9200 series

* Radeon? 9000 series

* Radeon? 8500 series

based cards....

I have a:(200 :( I'm going to have to upgrade I suppose

Does:Dork :D im using the driver now and my card is the same as yours

So they no longer support the

* Radeon? 7500 series

* Radeon? 7200 series

* Radeon? 7000 series

* Radeon? 9250 series

* Radeon? 9200 series

* Radeon? 9000 series

* Radeon? 8500 series

based cards....

I have a:(200 :( I'm going to have to upgrade I suppose

From the site:

Products Supported:

* Radeon? X1900 series

* Radeon? X1800 series

* Radeon? X1600 series

* Radeon? X1300 series

* Radeon? X850 series

* Radeon? X800 series

* Radeon? X700 series

* Radeon? X600 series

* Radeon? X550 series

* Radeon? X300 series

* Radeon? 9800 series

* Radeon? 9700 series

* Radeon? 9600 series

* Radeon? 9650 series

* Radeon? 9550 series

* Radeon? 9500 series

NOTE: ATI All-in-Wonder? variants based on the above are also supported.

Not Supported:

* Radeon? 9250 series

* Radeon? 9200 series

* Radeon? 9000 series

* Radeon? 8500 series

* Radeon? 7500 series

* Radeon? 7200 series

* Radeon? 7000 series

any update(change log) i have a 9550 car or something like it

I'm assuming that you're using the 32-bit XP driver.

New Features

This release of Catalyst? introduces the following new features:


Avivo™ Video Converter Extension for Windows Media Center Edition>

Catalyst? 6.6 introduces a Windows Media Center Edition Video Conversion utility. This utility will allow users to convert video content that is either recorded or available to Media Center Edition to a variety of different formats. The video content can be converted to MPEG-2, MPEG-4 SP, MPEG-4/AVC and Windows Media. iPod video and Sony PSP’s are also supported with an optimized profile for these devices. Theater 650 Pro TV Tuner Supportb>

Catalyst? 6.6 includes support for NTSC/ATSC and PAL/SECAM/DVB-T products based on the Theater 650 Pro TV Tuner chip. The Theater 650 Pro is a new chip from ATI for multimedia cards and DTV-on-a-chip solutions, integrating hardware video encoding, digital audio with noise reduction, and hardware PVR functions in a single chip.Performance Improvements/b>

As with most Catalyst? releases, performance has increased in various situations.

  • Far Cry performance improves 4-5%. Larger gains of up to 18.3% can be seen when using anisotropic filtering.Fear performance improves as much as 8.5% on X1800 and X1900 Single card systems and as much as 14% on X1800 and X1900 Crossfire systems.Splinter Cell (original) performance improves as much a 7% on X1300 and X1600 Crossfire systems.

Issues Resolved in Catalyst? Software Suite 6.6

The following section provides a summary of the issues that are resolved in the latest release of Catalyst?. These include:

  • Catalyst? Control Center: Connecting a display device capable of displaying a resolution of 1680x1050 to an ATI Radeon? X1900 no longer results in the display mode of 1680x1050 not being available in the Display Manager aspect. Further details on this resolved issue can be found in topic number 737-22011
  • Using Catalyst? 6.3 or higher along with the MMC version 9.13 and performing a TV channel scan no longer results in some higher TV channels failing to be detected. Further information on this resolved issue can be found in topic number 737-21890
  • Catalyst Control Center: Playing a media file using the Windows Media Player version 10 no longer results in Theater Mode exhibiting the same behavior as the Same on All option when clone mode is enabled 737-22504
  • The pulldown detection check box is no longer greyed out under the All Settings for bob and adaptive settings found in the Catalyst Control Center 737-22508
  • Clicking the Default button for AA and AF now restores the default setting for AA and AF 737-22512
  • Placing the mouse pointer over the Temporal anti-aliasing check box found in the Anti-Aliasing aspect of the Catalyst Control Center no longer results in the tool tip for Let the application decide being displayed 737-22517
  • Theater Mode is now functioning properly under the Windows 2000 operating system when clone mode is enabled 737-22614
  • Audio is no longer lost when quickly and repeatedly toggling between two TV channels 737-22615
    The Desktop Area list found in the Display Settings is now translated for the Russian language when using the Basic View of the Catalyst Control Center 737-22519
  • Setting the Catalyst Control Center skin to Quick Silver along with the display resolution to 800x600 when the language is set to Greek no longer results in cropped text being noticed in the Video->All Settings aspect 737-22529
  • The Apply button in the CV Properties aspect of the Catalyst Control Center now become active when adding a custom format 737-22538
  • x29: AV no longer occurs when fast window tracking is set to on 737-22643
  • Minimizing the TV window using the TV Adjustments found in the Catalyst Control Center followed by attempting to drag the TV window around the desktop using the mouse no longer results in the TV window failing to move properly 737-22539
  • DVD playback no longer blinks and the system entering a busy state no longer occurs when using the Windows Media Player v10 and having Theater Mode enabled in the Catalyst Control Center 737-22616
  • Connecting a CRT as a secondary display device and enabling clone mode no longer results in unsupported display modes being available in the Catalyst Control Center for the CRT 737-22617
  • HDTV custom format is now maintained when clone mode is enabled 737-22618
  • Enabling Clone mode followed by opening a full-screen DOS prompt no longer results in the DOS command screen failing to exit properly on the secondary display device 737-22619
  • Swapping between the primary (LCD) and secondary (CRT) display devices on a system containing an ATI Xpress 200 series no longer results in the LCD display device failing to display and image when attempting to resume from hibernation mode 737-22622
  • The mouse pointer no longer intermittently fails to be displayed on the lower portion of the secondary display device when the option to Stretch main horizontally found in the Catalyst Control Center is enabled 737-22623
  • Connecting both a CRT and a TV and keeping the TVout disabled, along with setting the desktop resolution to 1280x1024x32bpp no longer result in the default color setting found in the Catalyst Control Center failing to be restored when changing the gamma setting 737-22644
  • GLView v 223: Setting the display resolution to 2048x1536 32bpp at 70Hz no longer results in an error message being displayed when attempting to run the Rendering tests 737-22625
  • Setting AA to 8x or higher no longer results in corruption being noticed in the Anti-Aliasing preview of the Catalyst Control Center 737-22626City of Heroeseroes: Display corruption is no longer noticed when playing the game under Windows XP with an ATI Radeon X1x00 series product 737-22627
  • Enabling extended desktop mode and playing back HD content no longer results in corruption being noticed in the playback window 737-22628
  • An error message is no longer displayed when trying to edit a Hotkey function in the Hotkey Manger under various supported European languages 737-22629Quake4uake4: Texture corruption is no longer noticed when playing the game 737-22385Age of Empires IIIs III: All the buildings and silver mines no longer shimmer at the same time when right-clicking on an object 737-22630

I don't know if anything is actually useful for you and me, but I'll upgrade it for the sake of the game.

(And this way some game devs can't use with me the argument of "outdated drivers" when I get bizarre errors while playing their games. sa_words.gif

to be honest, I hate the Catalyst control center..

Why? Do you prefer it to be something like the Nvidia control centre?

PSG22?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It STILL has horrid theme support. Hard to look at for me. The white is too bright, and the black too dark. I'm using classic outlook for the Dark Grey theme. It's just right for me.
    • inb4 someone leaves the usual "what an unfortunate name" comment
    • Cuktech 10 Ultra charger review: big display, four ports, 110W total power by Taras Buria Cuktech recently announced a couple of Ultra-branded chargers, including a desktop 300W charger, which I reviewed a few weeks ago. For those who do need that much (or who do not want to spend that much on a charger), Cuktech also offers the 10 Ultra, a traditional wall charger with similar features. Four ports, a big display, and up to 110W of power output. After using it for a few weeks, here are my impressions. Disclaimer: Cuktech provided the review unit without any editorial input or pre-approval. Like the 30 Ultra, the 10 Ultra arrived in a box made of nice cardboard with quality print all over it. Inside, besides the charger, you will find a 240W 6A charger, which, this time, is fully braided. While Cuktech always bundles high-power cables with its chargers and power banks, they are usually regular and unassuming. This time, the cable is much nicer, matching the charger's $59.99 price tag. The charger itself measures 67 x 76 x 33 mm or 2.6 x 3.0 x 1.3 inches and weighs about 250 grams. Considering the charger has four ports and a big display, I would say the compact size is quite impressive, albeit a little hefty. The overall design is similar to other chargers from the manufacturer, minus the chrome Cuktech logo next to the four ports. The Cuktech 10 Ultra has retractable prongs for better portability. Its front side is covered with piano black plastic housing two elements: a capacitive button with backlight and a quite large display for various charging stats. Ports are downward-facing, and I have mixed feelings about such a design. It is not the most convenient when you frequently connect and disconnect cables. It makes you bend over to find the right port to connect, and it is a no-go with outlets mounted closer to the floor. On the bright side, design like this eliminates clutter and sagging, especially when using four cables at once. Plus, you get plenty of space for a big display. Ports include two high-speed USB Type-C ports, one Type-C for less demanding devices, and one classic USB Type-A. The first two ports deliver full 100W, while the third is capped at 45W. As for the Type-A port, its maximum output is 18W. In total, the charger delivers 110W of power, but in my testing, I managed to squeeze 117W when charging two power banks and a tablet. Quite impressive. Type-C1 Type-C2 Type-C3 Type-A Single-port 100W 100W 45W 18W Two ports 80W 20W - - Three ports 65W 20W 20W - Four ports 65W 20W 10W 10W The charger can detect handshake protocols and balance power across all four ports according to each device's needs. As such, power is not limited to the values in the table above. You can have two ports charging at 55W, three ports at 45W + 20W, and more. For some reason, Cuktech is not listing the supported protocols, but a quick test showed that it is compatible with PD3.0, PPS, QC5, DCP, and UFCS. When you connect a compatible device, the charger automatically detects its charging standard and displays it on the screen, for example, Apple 6A or Samsung 3A. Speaking of the screen. The main highlight of the 10 Ultra is its 1.57-inch display with a maximum brightness of 700 nits and 160-degree viewing angles. The display takes up most of the front, and it shows various charging-related information, including total output power, current temperature, power distribution across ports with watts, volts, and amps, a screensaver, and more. You can toggle between the different views by tapping the button, and holding it changes the screen orientation (portrait or horizontal, plus flipped) according to your socket position. The screen is very nice. It is sharp, vivid, and the fonts are easy to read. As for settings, you can change the following: Keep the screen on or off Lock the screen orientation (hold the button to change the screen orientation) Keep the USB Type-A port on Toggle power modes The charger has three power modes: AI: standard mode that automatically allocates power to each connected device. Power Priority: prioritizes power for high-demand devices, such as laptops or power banks. Balanced: splits power evenly across connected devices according to their needs I was skeptical at first, but after testing a few devices in different modes, I can see the benefit of these three modes. The most useful is power priority, which gives the first Type-C port more power. When I was charging a 100W power bank (port 1) alongside a 140W power bank (port 2), Power Priority split the total output about 75-30. Balanced mode, as the name suggests, splits the total output between the two ports more or less equally. As for AI mode, the charger uses its brain to detect which device needs more power. In my testing, it figured out that the 140W power needs a bit more juice. As I said, I expected this to be more of a gimmick, but the three built-in modes turned out quite useful. For example, you can prioritize your laptop while giving other ports a little less power, but still enough to charge at acceptable speeds. Unfortunately, unlike the 30 Ultra, this charger cannot display the battery level of the device being charged. This small feature turned out to be very useful when I was testing the 30 Ultra, as it allowed me to see my phone's battery level without picking it up. Like other Cuktech chargers I tested, the 10 Ultra one proved itself reliable and well-made. It uses Gallium nitride semiconductor technology to reduce the charger's size and improve efficiency. It is also better at dissipating heat, but I have to say that when charging two power banks at 117W total, the charger got hotter than what I would call comfortable (hold it for a few seconds, and you start feeling a burning sensation at your fingertips). However, the built-in thermal indicator remained below the temperature threshold, with the screen reassuring that the device operated at "High performance" (I tested it in a 21 °C / 69 °F room). Overall, the Cuktech 10 Ultra is a solid choice. If you need four ports and you like to nerd out on various stats, it is a very easy recommendation. It will take care of your laptop, phone, tablet, and power bank without breaking a sweat, plus the build, material, and cable quality are top-notch. The mode switcher is handy when charging different devices with different power needs, too. I cannot say a display is a must-have in a charger, especially when it makes you more conscious about where to plug it, but it is a neat addition if you have a socket at your table or bed level, so that you can actually use the display and its features. The more important fact is that despite its size and quality, the display does not make the charger that much more expensive than similarly powerful chargers from competitors. Plus, you can save 10% on the 10 Ultra with a promo code on Amazon. Buy Cuktech 10 Ultra charger - $53.99 on Amazon with a promo code As an Amazon Associate, we earn from qualifying purchases.
    • Last week I was investigating an issue with contacts and tried using the new Outlook. In the real (Classic) Outlook, you can easily go to any Outlook folder and present it in a Table View, then customize the columns to show/sort any field, which was exactly what I needed. But of course, the new Outlook doesn't have this feature at all. I gave up. Oh, and can we possibly stop claiming the new Outlook has PST support? What it really has is the ability to use the real Outlook in the background to pretend to have PST support. There is no PST support without the real Outlook installed.
    • Honestly just before Panos left it started to feel like MS just wasnt interested in them so they were being less innovative with them, and then when he DID leave for Amazon its kind of clear the direction is gone. It felt like Panos had both goals and drive, and a vision, but it felt like no matter what his title/department was the Surface devices never had the full interest of the rest of management and he was just pushing a bolder up a hill that MS was adding dirt to as he went.
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      76
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!