Recommended Posts

picture1lg6.png

I must say these are very good deals. I'm most certainly be changing to Sky Broadband when it becomes available. Sadly i can only get the Connect option, so i need to see what Pipex can do for me first.

Also...

picture2bq7.png

Even though i have a wireless router, its pretty good to get another one for free

Sky Broadband

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/
Share on other sites

Would love 16Mbit - But the exchange will only support 8Mbit.

But the question is, do they cap any port's ?

You NEED Sky TV to have this package, so its gunna come down the dish by my guess, so shouldnt anyone be able 2 get the full 16mb ?

And how reliable is this going to be ? i mean there is some noise on cable broadband, satalite is notorious for data loss in bad weather, and i wonder how this will affect people on Sky HD, theres already going to be serious bandwidth coming down one dish ?

Need more Info how it works tbh.

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722279
Share on other sites

The router is made by Netgear. :)

You NEED Sky TV to have this package, so its gunna come down the dish by my guess, so shouldnt anyone be able 2 get the full 16mb ?

And how reliable is this going to be ? i mean there is some noise on cable broadband, satalite is notorious for data loss in bad weather, and i wonder how this will affect people on Sky HD, theres already going to be serious bandwidth coming down one dish ?

Need more Info how it works tbh.

With the advent of Local Loop Unbundling they can use their own gear in the exchange and offer better speeds - I can't remember how! It definately doesn't use the dish though. It depends on distance from the exchange too I guess?

The speed could actually be 24 meg, but they're not promoting it as they can't guarantee it (so they said at the launch this week), so with the right conditions it could be more than 16 meg.

Satellite isn't actually always at fault as far as data loss goes - more Sky deciding to use dishes smaller than the recommended footprint for the satellites. My dish is 90cm and has never once lost Sky, where as the minidish on the roof drops it a few times a year.

A dish just reflects what ever is going on at the LNB, which just converts the signals down to a lower frequency and amplifies them. It's more the hardware that has to cope with it... You could have an Octo LNB, or even a whole 16 output system with a quattro LNB all doing HD and it would be fine.

It used IP Stream, and to get the 16MB speeds Sky need to have put the equipment in your local exchange. Currently around 28% have been enabled.

If you're a Sky customer they'll be writing to you with the specifics of when the service will be available to you.

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722320
Share on other sites

You NEED Sky TV to have this package, so its gunna come down the dish by my guess, so shouldnt anyone be able 2 get the full 16mb ?

And how reliable is this going to be ? i mean there is some noise on cable broadband, satalite is notorious for data loss in bad weather, and i wonder how this will affect people on Sky HD, theres already going to be serious bandwidth coming down one dish ?

Need more Info how it works tbh.

I dont think its comming down through the dish, you need a BT line

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722370
Share on other sites

When I first read the press articles and the giant billboards, I thought thats great, much, much better than my NTL deal.

But without reading too much about it, I belive too good to be true/too much too soon

.

Come on, ?10 for 16MB broadband. :wacko::

But time will tell.

:))

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722731
Share on other sites

You need a BT line for SKY tv anyway

No you don't. You need a fixed and operational line to have Sky Multiroom or in the first 12 months of a non-multiroom contract.

Sky+ and Sky HD can also require you to have a phone line - check the contract.

But in any case you do NOT need a BT line.

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722740
Share on other sites

One thing you guys are all missing here... It's "upto 16Mb". Meaning that it can be anywhere in between at peak times.

From another website:

Regarding Sky's fair use policy:

My email to sky

From: *email removed*

Sent: 20 July 2006 20:20

To: [email protected]

Subject: Sky Digital

Question: Hello. I am interested in getting Sky Max Broadband when it

becomes available in my area, but i was hoping you could give me some

details on the "fair use policy" and what exactly "unlimited" means. I

regularly test and distribute free Linux Distributions so a high(ish)

monthly bandwidth might occur from time to time.

Sky's email to me

Hi Christopher

Thank you for contacting us.

We've not published our Fair Use Policy (FUP), but should hopefully be doing

so shortly via our website. Fair usage is about making sure that our

customers who don't want to use as much can get fairer pricing based on

their needs. Usage allowance is made up of the total amount of bandwidth

you use, in GB, to upload content to the internet plus the bandwidth you use

to download content from the internet.

In order to establish what's available in your area and when, please feel

free to pre-register your interest via www.skybroadband.com

Hope this helps

Regards

Graeme

Plus it's DSL... I'll stick to my 10mbit soon to be 100mbit cable :D

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587722760
Share on other sites

I'm getting the Mac package with the 5 quid a month talk package.

16Mbps eh, I can only get 5.5 atm but what the hell. It's a damnsight cheaper than what I'm paying now! :)

Those complete mother ****ers wont let us get Max now apparently, the connect package is **** anyway so ARRGHH.

ALL ISPS ARE COMPLETE CRAP!

Edited by hotdog963al
Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587736353
Share on other sites

  • 1 month later...

The odd thing though, they said i can only have the internet on my Mac OR PC. I said, my PC is wireless so my router will be sending the signal, and he said no it will only work on one of them. Is it just a dumb techy or is he right?

Im using my router anyway, the sky one will be a back up.

Edit: Was waiting on the phone for 3 hours if you include last night!

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587894897
Share on other sites

The odd thing though, they said i can only have the internet on my Mac OR PC. I said, my PC is wireless so my router will be sending the signal, and he said no it will only work on one of them. Is it just a dumb techy or is he right?

Im using my router anyway, the sky one will be a back up.

Edit: Was waiting on the phone for 3 hours if you include last night!

Ignore the guy, he was obviously smoking weed during the phone call.

As for the router, here is another catch.. you have to use THEIR router, not your own. Their routers have a special firmware, so the router can only work with their own service.

Link to comment
https://www.neowin.net/forum/topic/480725-sky-broadband/#findComment-587894970
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!