Anyone having network issues in 5474.5?


Recommended Posts

Event log's not much good:

Level Date and Time Source Event ID Task Category

Warning 7/22/2006 9:28:27 AM Microsoft-Windows-Dhcp-Client 1006 None Your computer was unable to automatically configure the IP parameters for the Network Card with the network address 00138F7C0A44. The following error occurred during configuration: The operation completed successfully..

:rolleyes: :rofl:

With the exception of a wireless pc card in my laptop, all my networking came up flawlessly OOTB.

Hate to suggest what I'm sure you already tried, but you checked your cable? Hub/switch/router?

Remove the onboard nic in device manager and let it reinstall itself after a reboot.

If you have a spare nic laying around, I'd drop that in and see if that picks up correctly.

They rewrote the network...so it's not gonna work with some routers/cable modems. Nothing wrong is with the setup...You might try update your router or cable modem firmware.

I have the testing machine with the same board...and network doesn't work. It worked with Beta 2 build after i updated d-link 4100 router firmware to the latest version 1.6. Now with 5472 build doesn't work again. This is beta 2 stage, and i hope after they're done all the routers will be supported etc...

I have a feeling that Vista might be expensive upgrade...which is not worth because OS itself is not worth of anything. Too bad Microsoft won't port DX10 to Windows XP platform, which i think is a bull****... Add support for SM4.0 is not a big deal having the fact that Windows XP doesn't require any LDDM model or any additional crap to handle OS gui.

I have this strange problem with my wireless card called asus wl-138 on this vista build. Well it didnt work at all on beta 2 but on this build it connects to the network but not with the internet, it says that my card does not support those needed requirements that my AP needs. It worked fine on pre beta 2 and on xp. I use xp driver. Perhaps i need to wait for a newer vista build or for asus guys to update drivers.

Edited by Nieware
  • 2 weeks later...

I can't get any network access with this build. I'm using the built in NIC on my ASRock 939Dual which has worked fine in previous builds. The drivers appear to install fine but I can't get access with DHCP or manual address assignment. :no:

did you try manualy installing the 2.20 Uli drivers? my onboard Ethernet didnt work till i updated the Uli drivers

Another Asus939Dual user here, and no luck with Vista's network. OCWForums had a similiar discussion, and no one could find a solution. I suppose we'll just have to wait until a new build and see if that fixes anything.

  • 4 weeks later...

I'm having trouble with my 3com nic in RC1 too. It was working flawlessly in the previous builds but now it's acting flaky, Windows Update doesn't work at all, it says there are some DNS errors now and then, sometimes it says the router is not found, and other times it sees everything.

But while all that is going on I can still connect to sites like Google. It's odd. I can't figure out what's going. I know it's not my ISP since the other computesr on my network can connect to stuff a-okay.

Same problem here. 939Dual and RC1. The NIC becomes "deaf" after a warm restart. It takes a full power-off at the power-supply to reset the NIC.

I've downgraded to two different XP-level drivers from ULi and the problem did not go away with either of them. So I don't think it's a driver issue.

  • 2 weeks later...

just chiming in with a 'me too'. I have a 939dual and have been having the same problem. seems to happen randomly...sometimes it works on boot sometimes it doesnt. Although it seems if i leave vista alone for a few minutes after it boots that it works. havent tested that enough though to be sure.

MS has confirmed this is a bug in the Uli drivers dealing with DHCP requests.

So one thing i am going to try doing on my next boot into vista is assigning a static IP to the machine. Perhaps if you avoid having any DHCP requests it'll work. I've set my router to always assign the same ip to this machine so DHCP at this point is redundant anyhow.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Bose QuietComfort Ultra Gen 2 headphones are down to lowest price in over a month by Taras Buria Bose's second-gen QuietComfort Ultra headphones are premium over-ear headphones with noise cancellation, but right now, you can save 16%, thanks to a discount that brought the headphones to a new lowest price in over a month. While the general look and aesthetics remain unchanged compared to the previous gen, the Gen 2 features redesigned wear-detection sensors, which accurately pause your music the moment you take them off. Additionally, the headphones now support lossless audio via a direct USB-C wired connection, letting you enjoy uncompressed sound when plugged into your laptop or phone. There is also spatial audio support (works wirelessly) for a more immersive audio experience and improved noise cancellation, which makes the QuietComfort Ultra go-to headphones for many users on long flights or other scenarios when they need to isolate themselves from the surrounding noise. The QuietComfort Ultra (Gen 2) also features Bluetooth Multipoint for seamless switching between two devices at once. As for battery life, you get up to 30 hours on a single charge (up to 23 hours when using spatial audio). Besides good audio quality and noise cancellation, the headphones should be comfortable to wear, thanks to the lightweight 250-gram design and soft protein-leather ear pads. The QuietComfort Ultra Gen 2 are available in four colors, and all five are now available at the lowest price: Bose QuietComfort Ultra Bluetooth Headphones (2nd Gen) - $379 | 16% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Started implementing weapons! Here's a little sneak peek! 👀 Animation was done inside of Unreal Engine using Control Rig! Really useful tool, I don't have to go back and forth between Blender and UE, you can basically make tweaks while the game is running.
    • Keep in mind Intuit has lobbied like crazy to keep taxes complicated so they can continue to sell tax software. They also got caught hiding their legally mandated free version so they could release a second one that pushed countless people into charges they didn't need to pay to file. Intuit leads the charge on inventing problems so they can sell you the solution and disrespecting you in the process.
    • Oddly, there was a time that UFC games were culturally relevant, largely because of the graphics and gameplay that was different than the norm. But it seems like as the sport grew in popularity, gaming outlets stopped talking about the games.
    • Microsoft Edge 149.0.4022.69 by Razvan Serea Microsoft Edge is a super fast and secure web browser from Microsoft. It works on almost any device, including PCs, iPhones and Androids. It keeps you safe online, protects your privacy, and lets you browse the web quickly. You can even use it on all your devices and keep your browsing history and favorites synced up. Built on the same technology as Chrome, Microsoft Edge has additional built-in features like Startup boost and Sleeping tabs, which boost your browsing experience with world class performance and speed that are optimized to work best with Windows. Microsoft Edge security and privacy features such as Microsoft Defender SmartScreen, Password Monitor, InPrivate search, and Kids Mode help keep you and your loved ones protected and secure online. Microsoft Edge has features to keep both you and your family protected. Enable content filters and access activity reports with your Microsoft Family Safety account and experience a kid-friendly web with Kids Mode. The new Microsoft Edge is now compatible with your favorite extensions, so it’s easy to personalize your browsing experience. Microsoft Edge 149.0.4022.69 changelog: Fixed an issue that caused the Downloads dialog to continue displaying the "Keep/Delete" prompt for .rdp files after the download completed. Stable channel security updates are listed here. Download: Microsoft Edge (64-bit) | 193.0 MB (Freeware) Download: Microsoft Edge (32-bit) | 170.0 MB Download: Microsoft Edge (ARM64) | 188.0 MB View: Microsoft Edge Website | Release History Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!