Recommended Posts

Gigabyte GeForce 7600 GT 256 Mb

Man you're lucky. I've got a 7800gt and the screen flickers way more than it should for CoH. Nvidia is really making me consider ATI for the next computer I build. Yes I know it's a release candidate, but if they're going to release drivers that say RC2, then they should work as stable video drivers: on RC2.

Sigh after hearing these comments I'm not very excited about this :/

OK, here's a positive comment:

These drivers are an improvement over 96.33. Games like UT2004 finally run decent again, some GUI glitches I saw in Prey were gone, and for videos they don't seem to stutter anymore. (This also could be because I just flipped Superfetch off.)

But for those complaining about low FPS versus XP's drivers: give it some time. They (nVidia) haven't completed their freaking control panel yet.

Man you're lucky. I've got a 7800gt and the screen flickers way more than it should for CoH. Nvidia is really making me consider ATI for the next computer I build. Yes I know it's a release candidate, but if they're going to release drivers that say RC2, then they should work as stable video drivers: on RC2.

Oh, I'm sure those guys that ran into the error code 43 problem for a long time would be more than grateful to get at least a game working over flickering problems in a specific game. Does ATI have OpenGL support yet for their drivers?

Update: These drivers are a no go for me. They caused my screen to go berserk when a game or screen saver is on the screen and i have to restart the computer to see anything again. It is the type of screen when you set your resolution too high and everything goes scrambled, thats what it looks like.

:(

Update: These drivers are a no go for me. They caused my screen to go berserk when a game or screen saver is on the screen and i have to restart the computer to see anything again. It is the type of screen when you set your resolution too high and everything goes scrambled, thats what it looks like.

:(

Same.. XP ftw.

First nVidia driver to work well with my BFG 7900GT. The drivers are not sign so you get a RED popup window when trying to install them. I just clicked "Allow" and everything when fine. This is using x64 RC2.

Dual monitor works great (as with default Vista RC2 driver, I had no problem).

No problem playing Need For Speed Most Wanted or Sims2.

:yes: :)

First nVidia driver to work well with my BFG 7900GT. The drivers are not sign so you get a RED popup window when trying to install them. I just clicked "Allow" and everything when fine. This is using x64 RC2.

Dual monitor works great (as with default Vista RC2 driver, I had no problem).

No problem playing Need For Speed Most Wanted or Sims2.

:yes: :)

Youre lucky.. Duals doesn't work at me in vista at all :no:

Youre lucky.. Duals doesn't work at me in vista at all :no:

My 7900GT is connected to a dual display, one 22" 1680x1050 (main) and a 19" 1280x1024 (secondary)

The only problem I have is with Media Player. Movies are choppy on the main display but fine and smooth on the secondary display!!! And that happen even if i'm not in full screen... Using whatever codec!

Microsoft has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when Microsoft confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Microsoft has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when Microsoft confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Where are you getting this information? It's plain wrong. Creative has new beta drivers for X-Fi for RC2, works very well for the first time. nVidia and ATI just need to make new drivers for Vista and SLI and CF will work with no problem.

It's a new OS with new requirements for drivers. Give it some time and everything will work great. Anyway, they all have until january 2007 to build good working drivers, since it's only at that time that "everybody" will be able to buy Vista. November release of Vista is only for business, not very hardcore users.

These drivers are alright, I get higher FPS in battlefield 2142 and dual monitors still work fine, like they did with the stock drivers that came with RC2. However I still get serious curruption in full screen games, I have to run the game in a window and all problems are gone, I just match the game's video resolution with my desktop resolution and the game apears full screen, but in a maximized window. Sticking with these drivers over the stock RC2 ones just because I get higher FPS in gaming.

nVidia makes extremely good drivers for Windows XP! They keep improving them over and over again, so i think that they just need some time!

BTW: Vista is released within ca. 10 days, but that's for business etc. When nVidia get's the final Vista, they will start developing at high-speed to get us some very good, working, fully featured drivers!

Some random unsupported quoter on the intarweb has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when some random unsupported quoter on the intarweb confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Fixed that for you.

Where are you getting this information? It's plain wrong. Creative has new beta drivers for X-Fi for RC2, works very well for the first time. nVidia and ATI just need to make new drivers for Vista and SLI and CF will work with no problem.

It's a new OS with new requirements for drivers. Give it some time and everything will work great. Anyway, they all have until january 2007 to build good working drivers, since it's only at that time that "everybody" will be able to buy Vista. November release of Vista is only for business, not very hardcore users.

*Sigh* Go ahead and try to use EAX or CMSS. Guess what, they don't work. There's a long post from one of the Creative reps on their forums explaining that those type of features are no longer supported in Vista. Lots of people are angry about it, but nothing Creative can do about it.

Has nVidia or ATI confirmed that SLI/Crossfire support is forthcoming? Don't count on it... Maybe on DX10-level cards.

Direct Quotes from Creative Forums Rep on their support forums:

http://forums.creative.com/creativelabs/bo...message.id=1694

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

"The Vista audio architecture disables DirectSound 3D hardware acceleration; resulting in legacy DirectSound based EAX game titles not working as they did in XP. Issues that may be encountered:

Could range from loss of EAX functionality in EAX enabled games to a complete game incompatibility, depending on how the game title was authored."

At least Creative is being upfront about it and admitted it. You try telling hundreds of people who spent $150 on an audio card that their expensive card now functions like a $5 onboard Realtek audio chip in Vista.

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

Hey, Creative is writing it themself... "REQUIRED US TO WRITE NEW SOFTWARE". It's Creative job to make their card work with Vista.

It's the same for SLI or CF. It's not the OS that enable SLI, it never was even with WinXP. It's the drivers that do the job. I've read on nVidia forum that SLI enable driver would be out by the time Vista ship to everyone in january 2007. I guess it must be the same for ATI.

*Sigh* Go ahead and try to use EAX or CMSS. Guess what, they don't work. There's a long post from one of the Creative reps on their forums explaining that those type of features are no longer supported in Vista. Lots of people are angry about it, but nothing Creative can do about it.

Has nVidia or ATI confirmed that SLI/Crossfire support is forthcoming? Don't count on it... Maybe on DX10-level cards.

Direct Quotes from Creative Forums Rep on their support forums:

http://forums.creative.com/creativelabs/bo...message.id=1694

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

"The Vista audio architecture disables DirectSound 3D hardware acceleration; resulting in legacy DirectSound based EAX game titles not working as they did in XP. Issues that may be encountered:

Could range from loss of EAX functionality in EAX enabled games to a complete game incompatibility, depending on how the game title was authored."

At least Creative is being upfront about it and admitted it. You try telling hundreds of people who spent $150 on an audio card that their expensive card now functions like a $5 onboard Realtek audio chip in Vista.

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

I cry utter bullcrap coming from Creative. Just why does it (CMSS on OS audio streams) work ON THEIR BETA 2 DRIVER and not in their RC1 driver? They must've broken something deliberately.

But thanks for posting that quote above; I was wondering why CMSS failed to work with the RC2 drivers. Crap, now it looks like starting from next month I'll have to put up with bugged drivers because Creative like smart arses decided to drop timebombs on drivers. :angry:

I'm not sure whats going on, but I upgraded to RC2 from 5728. For some reason I can't install Vista on my desktop without already being in an OS (specifically XP or Vista itself). I can boot to the dvd, but when I get into the setup application it fails and says that its missing a required driver to install. I can use the exact same dvd and install it on my laptop (Dell Inspiron 9300) without any problems at all. The DVD drive I have in my desktop is a NEC ND-3500A. Vista doesn't seem to like that drive at all.

But anyway, here's the problem that I'm having with RC2 but didn't have with RC1 (and also a problem I had with RC1 but don't have with RC2, so I guess its kind of a trade off).

1.) RC1 Problem: Media center would not change channels correctly when using my satellite receiver. If i had something set to record, it would constantly change to the wrong channel and wouldn't record the correct show.

RC1 Good Side: No problems using Media Center or WMP11 full screen watching videos.

2.) RC2 Problem: Media Center and WMP 11 flickers VERY badly when using it full screen, but in windowed mode, its fine. It also causes the audio to stutter very badly as well (I upgraded both the audio and video drivers, new nVidia drivers and new Creative Audigy drivers)

RC2 Good Side: Media Center changes channels correctly consistently now when recording.

Its like I can't win for anything. Also, I cant play Scarface: The World Is Yours on Vista. The video is so corrupted you can't see anything on screen. The game works fine in XP though. However, Splinter Cell: Chaos Theory runs great on Vista at 1600x1200 with everything set to max on my 6800 Ultra, it also shows up in the Game Explorer.

I just hope these problems are attributed to bad drivers. I'll try uninstalling both the video drivers and reinstalling them to see if that fixes the problem (i didn't uninstall the RC1 nvidia drivers before I installed the RC2 drivers).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OpenAI is rolling out a major upgrade to ChatGPT memory by Pradeep Viswanathan OpenAI is rolling out a major upgrade to ChatGPT's memory, making the system more capable, current, and scalable across long-term use. Memory allows ChatGPT to remember useful details about users, including their preferences, projects, and constraints. Instead of starting every conversation from scratch, ChatGPT can use this context to provide more relevant responses in future chats. OpenAI first launched saved memories in February 2024. That feature allowed users to explicitly ask ChatGPT to save information into its memory, such as travel plans or writing preferences. However, this system had limits because it depended heavily on users giving clear instructions to remember something. Additionally, saved memories could become stale over time. In April 2025, OpenAI expanded memory by allowing ChatGPT to reference past chat context outside the saved memories list. This was powered by a background process called “dreaming,” which automatically curates memories from chat history. This made ChatGPT better at learning from natural conversation without requiring users to manually save every detail. Today, OpenAI announced a more capable and compute-efficient memory architecture built on top of dreaming. This new system improves ChatGPT’s ability to carry forward useful context, follow user preferences, and remain accurate as time passes. According to OpenAI’s internal evaluations, the new system improves factual recall from 67.9% in 2025 to 82.8% in 2026. Preference adherence improves from 55.3% to 71.3%, while accuracy over time improves from 52.2% to 75.1%. The best part of this new system is a new memory summary page where users can review ChatGPT's memories. Users can even update details, correct information, or give instructions on what topics ChatGPT should bring up and when. This new, improved memory system is available to ChatGPT Plus and Pro users in the US starting today. It will roll out to more countries, as well as Free and Go users, in the coming weeks.
    • I work for a video production company in Australia. The camera operators shoot footage and then pass the SD card over to the editors. Much easier than handing over the entire camera. Plus, on a busy day you can hand off the SD card and then pop another in for the next shoot. Or, you might have used multiple SD cards because you need the extra space for a long shoot. I also use USB cables and wifi for transferring footage, but in many cases an SD card reader is the easiest method.
    • Microsoft Edge 149.0.4022.52 by Razvan Serea Microsoft Edge is a super fast and secure web browser from Microsoft. It works on almost any device, including PCs, iPhones and Androids. It keeps you safe online, protects your privacy, and lets you browse the web quickly. You can even use it on all your devices and keep your browsing history and favorites synced up. Built on the same technology as Chrome, Microsoft Edge has additional built-in features like Startup boost and Sleeping tabs, which boost your browsing experience with world class performance and speed that are optimized to work best with Windows. Microsoft Edge security and privacy features such as Microsoft Defender SmartScreen, Password Monitor, InPrivate search, and Kids Mode help keep you and your loved ones protected and secure online. Microsoft Edge has features to keep both you and your family protected. Enable content filters and access activity reports with your Microsoft Family Safety account and experience a kid-friendly web with Kids Mode. The new Microsoft Edge is now compatible with your favorite extensions, so it’s easy to personalize your browsing experience. Microsoft Edge 149.0.4022.52 changelog: Migration to improved V2 architecture for Workspaces. Workspaces, introduced in Edge in 2022, allows users to create durable sets of tabs that can be saved and shared with others. In order to improve reliability and performance of this feature, the following changes are being made: Migrating data for saved Workspaces from OneDrive/SharePoint to Edge Sync service Removing the collaboration/share functionality of this feature For organizations who have disabled Sync through policy, the existing v1 Workspace data will still be migrated to the new architecture. New v2 Workspaces created after migration won't sync across devices and will remain local to each device. This update occurs on a progressive rollout beginning in Edge Stable v145 and will continue rolling out in Edge v149. For more information, see Getting started with Microsoft Edge Workspaces. Feature Updates Passkey Sync for Enterprise Users. Microsoft Edge is introducing support for passkey synchronization for enterprise users, enabling secure, passwordless authentication across devices. Passkeys created in Edge can now be synced seamlessly, improving sign-in experience while maintaining strong security standards. Note: This is a controlled feature rollout. If you don't see this change, check back as we continue the rollout. Enterprise WebView2 runtime downgrade via DowngradeVersion policy. Administrators can temporarily roll back specific applications to a previous WebView2 Evergreen Runtime version (N-1 or N-2) using the new DowngradeVersion policy in msedgewebview2.admx. The Downgrade Version policy allows enterprises to mitigate critical regressions by specifying per-application exe-to-version mappings. The Edge Updater installs the target version side-by-side, and the WebView2 Loader redirects targeted apps accordingly. Downgrades auto-expire with each new WebView2 release: apps pinned to N-1 remain on the same version (now becoming N-2) and will auto-update in the next release, while apps pinned to N-2 will revert to the current Evergreen version. The policy applies only to enterprise-managed devices (domain-joined or MDM-enrolled). For more information, see Microsoft Edge WebView2 Policy Documentation | Microsoft Learn. Collections retirement. Collections has been removed in this update. Users can no longer access or use the feature. To keep saved content, users can export it, or move all pages to Favorites before updating to Microsoft Edge Stable 149. For more information, see Organize your ideas with Collections in Microsoft Edge - Microsoft Support. Modern, unified, and updated Look and Feel. Microsoft Edge has updated the Look and Feel to give customers a unified experience across all of Microsoft AI surfaces including Copilot and Bing. This changes multiple elements of the UX such as spacing, corners, fonts, default colors, etc. Clarify choices surrounding third-party cookie settings. Language under Settings > Privacy, search, and services > Cookies are clarified to better describe the choices users have in managing third-party cookies. Custom primary password retirement. Users are no longer able to create a new custom primary password in Edge Settings edge://settings/autofill/passwords/settings. Any users who are still using a custom primary password will be automatically migrated to device authentication. Additionally, the PrimaryPasswordSetting policy will no longer support the WithCustomPrimaryPassword option. For more information, see Keep your saved passwords private in Microsoft Edge | Microsoft Support. Unifying Copilot Chat policy controls. The Microsoft365CopilotChatIconEnabled policy is the standard for configuring Copilot Chat. Previously, this behavior was controlled by blocking the Copilot extension, either explicitly or by using the * wildcard via the ExtensionSettings or ExtensionInstallBlockList policies. Extension and sidebar policies no longer affect the appearance or functionality of Copilot Chat. Copilot address bar suggestions were also tied to extension policy settings. Starting in Microsoft Edge version 149, admins can use the CopilotAddressBarSuggestionsEnabled policy to manage this behavior. Intune MAM Protected Downloads. The protected downloads feature for Intune MAM is now available for BYOD (Bring Your Own Device) devices, which aren't managed by a tenant. Policy Updates / New policies CopilotAddressBarSuggestionsEnabled - Enable Copilot address bar suggestions CpuPerformanceTierOverride - Override for the CPU performance tier DataUrlInWebWorkerOpaqueOriginEnabled - Enable opaque origins for data URLs in Web Workers DefaultLocalFontsSetting - Default Local Fonts permission setting ForceForegroundPriorityForUrls - Force foreground priority for specific URLs LocalFontsAllowedForUrls - Allow Local Fonts permission on these sites LocalFontsBlockedForUrls - Block Local Fonts permission on these sites Deprecated policies WalletDonationEnabled - Wallet Donation Enabled (deprecated) EdgeWalletEtreeEnabled - Edge Wallet E-Tree Enabled (deprecated) Additional policy changes ForceForegroundPriorityForUrls - ForceForegroundPriorityForOrigins is renamed to ForceForegroundPriorityForUrls OnSecurityEventEnterpriseConnector - Add macOS platform support ProtectedContentIdentifiersAllowed - Remove macOS platform support Download: Microsoft Edge (64-bit) | 193.0 MB (Freeware) Download: Microsoft Edge (32-bit) | 170.0 MB Download: Microsoft Edge (ARM64) | 188.0 MB View: Microsoft Edge Website | Release History Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
    • Collaborator
      Asgardi earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      471
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      67
    5. 5
      Michael Scrip
      59
  • Tell a friend

    Love Neowin? Tell a friend!