Recommended Posts

Gigabyte GeForce 7600 GT 256 Mb

Man you're lucky. I've got a 7800gt and the screen flickers way more than it should for CoH. Nvidia is really making me consider ATI for the next computer I build. Yes I know it's a release candidate, but if they're going to release drivers that say RC2, then they should work as stable video drivers: on RC2.

Sigh after hearing these comments I'm not very excited about this :/

OK, here's a positive comment:

These drivers are an improvement over 96.33. Games like UT2004 finally run decent again, some GUI glitches I saw in Prey were gone, and for videos they don't seem to stutter anymore. (This also could be because I just flipped Superfetch off.)

But for those complaining about low FPS versus XP's drivers: give it some time. They (nVidia) haven't completed their freaking control panel yet.

Man you're lucky. I've got a 7800gt and the screen flickers way more than it should for CoH. Nvidia is really making me consider ATI for the next computer I build. Yes I know it's a release candidate, but if they're going to release drivers that say RC2, then they should work as stable video drivers: on RC2.

Oh, I'm sure those guys that ran into the error code 43 problem for a long time would be more than grateful to get at least a game working over flickering problems in a specific game. Does ATI have OpenGL support yet for their drivers?

Update: These drivers are a no go for me. They caused my screen to go berserk when a game or screen saver is on the screen and i have to restart the computer to see anything again. It is the type of screen when you set your resolution too high and everything goes scrambled, thats what it looks like.

:(

Update: These drivers are a no go for me. They caused my screen to go berserk when a game or screen saver is on the screen and i have to restart the computer to see anything again. It is the type of screen when you set your resolution too high and everything goes scrambled, thats what it looks like.

:(

Same.. XP ftw.

First nVidia driver to work well with my BFG 7900GT. The drivers are not sign so you get a RED popup window when trying to install them. I just clicked "Allow" and everything when fine. This is using x64 RC2.

Dual monitor works great (as with default Vista RC2 driver, I had no problem).

No problem playing Need For Speed Most Wanted or Sims2.

:yes: :)

First nVidia driver to work well with my BFG 7900GT. The drivers are not sign so you get a RED popup window when trying to install them. I just clicked "Allow" and everything when fine. This is using x64 RC2.

Dual monitor works great (as with default Vista RC2 driver, I had no problem).

No problem playing Need For Speed Most Wanted or Sims2.

:yes: :)

Youre lucky.. Duals doesn't work at me in vista at all :no:

Youre lucky.. Duals doesn't work at me in vista at all :no:

My 7900GT is connected to a dual display, one 22" 1680x1050 (main) and a 19" 1280x1024 (secondary)

The only problem I have is with Media Player. Movies are choppy on the main display but fine and smooth on the secondary display!!! And that happen even if i'm not in full screen... Using whatever codec!

Microsoft has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when Microsoft confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Microsoft has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when Microsoft confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Where are you getting this information? It's plain wrong. Creative has new beta drivers for X-Fi for RC2, works very well for the first time. nVidia and ATI just need to make new drivers for Vista and SLI and CF will work with no problem.

It's a new OS with new requirements for drivers. Give it some time and everything will work great. Anyway, they all have until january 2007 to build good working drivers, since it's only at that time that "everybody" will be able to buy Vista. November release of Vista is only for business, not very hardcore users.

These drivers are alright, I get higher FPS in battlefield 2142 and dual monitors still work fine, like they did with the stock drivers that came with RC2. However I still get serious curruption in full screen games, I have to run the game in a window and all problems are gone, I just match the game's video resolution with my desktop resolution and the game apears full screen, but in a maximized window. Sticking with these drivers over the stock RC2 ones just because I get higher FPS in gaming.

nVidia makes extremely good drivers for Windows XP! They keep improving them over and over again, so i think that they just need some time!

BTW: Vista is released within ca. 10 days, but that's for business etc. When nVidia get's the final Vista, they will start developing at high-speed to get us some very good, working, fully featured drivers!

Some random unsupported quoter on the intarweb has already said that EAX and any direct driver hooks into the audio system are DOA in Vista (which renders Creative X-Fi a $150 equivalent to a SoundBlaster 16). It's not going to be pretty when some random unsupported quoter on the intarweb confirms that SLI & CrossFire (and any direct driver hooks into the video system) are DOA in Vista.

Fixed that for you.

Where are you getting this information? It's plain wrong. Creative has new beta drivers for X-Fi for RC2, works very well for the first time. nVidia and ATI just need to make new drivers for Vista and SLI and CF will work with no problem.

It's a new OS with new requirements for drivers. Give it some time and everything will work great. Anyway, they all have until january 2007 to build good working drivers, since it's only at that time that "everybody" will be able to buy Vista. November release of Vista is only for business, not very hardcore users.

*Sigh* Go ahead and try to use EAX or CMSS. Guess what, they don't work. There's a long post from one of the Creative reps on their forums explaining that those type of features are no longer supported in Vista. Lots of people are angry about it, but nothing Creative can do about it.

Has nVidia or ATI confirmed that SLI/Crossfire support is forthcoming? Don't count on it... Maybe on DX10-level cards.

Direct Quotes from Creative Forums Rep on their support forums:

http://forums.creative.com/creativelabs/bo...message.id=1694

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

"The Vista audio architecture disables DirectSound 3D hardware acceleration; resulting in legacy DirectSound based EAX game titles not working as they did in XP. Issues that may be encountered:

Could range from loss of EAX functionality in EAX enabled games to a complete game incompatibility, depending on how the game title was authored."

At least Creative is being upfront about it and admitted it. You try telling hundreds of people who spent $150 on an audio card that their expensive card now functions like a $5 onboard Realtek audio chip in Vista.

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

Hey, Creative is writing it themself... "REQUIRED US TO WRITE NEW SOFTWARE". It's Creative job to make their card work with Vista.

It's the same for SLI or CF. It's not the OS that enable SLI, it never was even with WinXP. It's the drivers that do the job. I've read on nVidia forum that SLI enable driver would be out by the time Vista ship to everyone in january 2007. I guess it must be the same for ATI.

*Sigh* Go ahead and try to use EAX or CMSS. Guess what, they don't work. There's a long post from one of the Creative reps on their forums explaining that those type of features are no longer supported in Vista. Lots of people are angry about it, but nothing Creative can do about it.

Has nVidia or ATI confirmed that SLI/Crossfire support is forthcoming? Don't count on it... Maybe on DX10-level cards.

Direct Quotes from Creative Forums Rep on their support forums:

http://forums.creative.com/creativelabs/bo...message.id=1694

"The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this. Issues that may be encountered: CMSS no longer works on audio streams from the OS."

"The Vista audio architecture disables DirectSound 3D hardware acceleration; resulting in legacy DirectSound based EAX game titles not working as they did in XP. Issues that may be encountered:

Could range from loss of EAX functionality in EAX enabled games to a complete game incompatibility, depending on how the game title was authored."

At least Creative is being upfront about it and admitted it. You try telling hundreds of people who spent $150 on an audio card that their expensive card now functions like a $5 onboard Realtek audio chip in Vista.

nVidia and ATI are simply being evasive about the lack of SLI support in Vista.

I cry utter bullcrap coming from Creative. Just why does it (CMSS on OS audio streams) work ON THEIR BETA 2 DRIVER and not in their RC1 driver? They must've broken something deliberately.

But thanks for posting that quote above; I was wondering why CMSS failed to work with the RC2 drivers. Crap, now it looks like starting from next month I'll have to put up with bugged drivers because Creative like smart arses decided to drop timebombs on drivers. :angry:

I'm not sure whats going on, but I upgraded to RC2 from 5728. For some reason I can't install Vista on my desktop without already being in an OS (specifically XP or Vista itself). I can boot to the dvd, but when I get into the setup application it fails and says that its missing a required driver to install. I can use the exact same dvd and install it on my laptop (Dell Inspiron 9300) without any problems at all. The DVD drive I have in my desktop is a NEC ND-3500A. Vista doesn't seem to like that drive at all.

But anyway, here's the problem that I'm having with RC2 but didn't have with RC1 (and also a problem I had with RC1 but don't have with RC2, so I guess its kind of a trade off).

1.) RC1 Problem: Media center would not change channels correctly when using my satellite receiver. If i had something set to record, it would constantly change to the wrong channel and wouldn't record the correct show.

RC1 Good Side: No problems using Media Center or WMP11 full screen watching videos.

2.) RC2 Problem: Media Center and WMP 11 flickers VERY badly when using it full screen, but in windowed mode, its fine. It also causes the audio to stutter very badly as well (I upgraded both the audio and video drivers, new nVidia drivers and new Creative Audigy drivers)

RC2 Good Side: Media Center changes channels correctly consistently now when recording.

Its like I can't win for anything. Also, I cant play Scarface: The World Is Yours on Vista. The video is so corrupted you can't see anything on screen. The game works fine in XP though. However, Splinter Cell: Chaos Theory runs great on Vista at 1600x1200 with everything set to max on my 6800 Ultra, it also shows up in the Game Explorer.

I just hope these problems are attributed to bad drivers. I'll try uninstalling both the video drivers and reinstalling them to see if that fixes the problem (i didn't uninstall the RC1 nvidia drivers before I installed the RC2 drivers).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • What pushed me away from edge was the massive enshitification, constantly adding more and more bloat. Coupled with the constant changes in UI, and especially in the settings. Want to change the default search from Bing to whatever, you would have use search to know the three places to go and change. Then 6 months down the road, the Edge settings area gets a major update/change and doing the same task, changing the default search is now moved to three new locations. This never stops. They do this in Azure and its so insanely irritating. I am a huge OneNote user and they have effed it up so many times in the last 5 years....same for Outlook. People walk away from Microsoft products out of exhaustion.
    • Mac does nothing of the sort. You can change the default browser very easily it does not nag you and when you do this, it does not open something still in Safari....like Windows does with Edge.
    • I do not remember anything happening to Apple and Google for bribing people not to make Apps for Windows Phone. Edge barley has a foot print to matter. If the other browser companies want more of the Pie, they need to do better. I use Brave on all my personal device. However in industry, Edge of default, as we can manage it easier with MS tools.
    • On the one hand, it shouldn't be difficult. You buy a computer, you decide what OS you want, which browser etc. Simple enough. But that's the techie side of things. My sister, my mother, wouldn't bother with such a thought. And I'm pretty sure that if you presented a window asking them what to pick they would say, "I don't care! I just want to access my Email!"
    • CPU-Z 2.20.2 by Razvan Serea CPU-Z is a freeware utility that gathers information on some of the main devices of your system. CPU-Z does not need to be installed, just unzip the files in a directory and run the .exe. In order to remove the program, just delete the files. The program does not copy any file in any Windows directory, nor write to the registry. CPU Name and number. Core stepping and process. Package. Core voltage. Internal and external clocks, clock multiplier. Supported instructions sets. All cache levels (location, size, speed, technology). Mainboard Vendor, model and revision. BIOS model and date. Chipset (northbridge and southbridge) and sensor. Graphic interface. Memory Frequency and timings. Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table. System Windows and DirectX version. CPU-Z 2.20.2 changelog: Intel Arc G3 and G3 Extreme (Panther Lake)(2.20.2). AMD Ryzen 7 7700X3D (Raphael) (2.20.1). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). AMD Ryzen AI Max+ 392 (Strix Halo). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). Intel Core 7 360 and 350 (Wildcat Lake). Intel Core 5 330, 320 and 315 (Wildcat Lake). Intel Core 3 304 (Wildcat Lake). Intel Core 9 273PQE, 273PTE, 273PE (Bartlett Lake). Intel Core 7 253PQE, 253PTE, 253PE, 251TE, 251E (Bartlett Lake). Intel Core 5 223PQE, 223PTE, 223PE, 221TE, 221E, 213PTE, 213PE, 211TE, 211E (Bartlett Lake). Intel Core 3 201TE, 201E (Bartlett Lake). Intel Arc Pro B70 and B65 (BMG-G31). Intel Arc Pro B60 and B50 (BMG-G21). Support of HUDIMM and HSODIMM memory modules. Download: CPU-Z 2.20.2 | Portable ~5.0 MB (Freeware) View: CPU-Z Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      PsYcHoKiLLa
      245
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      75
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!