AutoPatcher XP October 2006


Recommended Posts

I think there is a bug in October release, you cant save as default (hold shift and hover mouse over modules details).. it always go into module details ...

This feature works in Sept 2006

I think that Sep is 5.1.35, and Oct is 5.1.37. This version appearantly has a bug.

Pardon the total noob questions here but... I always install my updates the same way. I dl them and save them to my desktop, then shut everything down and install from there. I have never had a problem with this. When I tried that with the October 06 XP update, it got about 1/2 way through installing and then Windows just shut down and rebooted. This has never happened before. It has always asked me in the past if I wanted to reboot immediately and then gave me a countdown... So far, I am assuming that it was normal, that it was just designed that way this time, and that the counter telling me when it was going to be finished was just wrong and it finished faster than expected. Even though I am assuming this, however, I would still like some sort of reassurance, if possible. Is this normal or have I done something wrong or is it a problem with the update itself?

Thank you for your patience (If in fact you are patient...) Thank you for helping anyway if you are not... :)

I've had reboots on two machines so far. I had to run Autopatcher again and reselect my preferences again, then it ran through with no problem.

Not sure which module is causing the reboots.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

I had the October Update installed on several XP machines and noticed that reboots occur on specific configurations though I have yet to pinpoint the exact cause.

I do agree that IE7 should be included perhaps with the next release.

...

I do agree that IE7 should be included perhaps with the next release.

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

-------

On a side note... I expect Gandolas to drop by with good news for us Portuguese users. :whistle:

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

If it's on windows update, it should be in autopatcher, and probably in the case of IE it should be selected by default.

Us Fx users can uncheck it, but I think you'll find most security experts will recommend updating even if you use it for nothing besides windows update.

October Dutch released!

Torrent

http://autopatcher.scarywater.net/AutoPatc...ULL.exe.torrent

Http

http://autopatcher.cachefly.net/AutoPatche...06_NLD_FULL.exe

Bandwidth provided by Cachefly.com

MD5-d2b942f50dade3c594fa6e04f7412427

Edited by Oddstar

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

Yes, you can create a defaults file. check out this thread for details

Although for us dialup-users, how much more bigger will that make the download. I mean XP updates don't have IE, but Win 2k updates do.

The IE7 installer from the MS website is 14.8MB, I'm not sure how compressed that is, so that size may decrease when it's packaged with APXP.

1st for all connected with this exceptional program.... thanks.

Now for a possible add-on to the next update. There have been isolated reports that the installation of

Crictical security update KB917422 (MS06-051), causing some isolated problems with programs that some people might have to run. Especially, some Electronic Arts games (check their website for updated info) and

some other programs (as listed in Microsoft patch update info to fix it).

http://support.microsoft.com/?kbid=924867

Apparently, this is not available via Windows Update... but, only to resolve issues related to specific problems you might have running certain programs?????? So, possibly can be added to the Recommended Updates area, if you are so inclined?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!