AutoPatcher XP October 2006


Recommended Posts

I think there is a bug in October release, you cant save as default (hold shift and hover mouse over modules details).. it always go into module details ...

This feature works in Sept 2006

I think that Sep is 5.1.35, and Oct is 5.1.37. This version appearantly has a bug.

Pardon the total noob questions here but... I always install my updates the same way. I dl them and save them to my desktop, then shut everything down and install from there. I have never had a problem with this. When I tried that with the October 06 XP update, it got about 1/2 way through installing and then Windows just shut down and rebooted. This has never happened before. It has always asked me in the past if I wanted to reboot immediately and then gave me a countdown... So far, I am assuming that it was normal, that it was just designed that way this time, and that the counter telling me when it was going to be finished was just wrong and it finished faster than expected. Even though I am assuming this, however, I would still like some sort of reassurance, if possible. Is this normal or have I done something wrong or is it a problem with the update itself?

Thank you for your patience (If in fact you are patient...) Thank you for helping anyway if you are not... :)

I've had reboots on two machines so far. I had to run Autopatcher again and reselect my preferences again, then it ran through with no problem.

Not sure which module is causing the reboots.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

I had the October Update installed on several XP machines and noticed that reboots occur on specific configurations though I have yet to pinpoint the exact cause.

I do agree that IE7 should be included perhaps with the next release.

...

I do agree that IE7 should be included perhaps with the next release.

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

-------

On a side note... I expect Gandolas to drop by with good news for us Portuguese users. :whistle:

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

If it's on windows update, it should be in autopatcher, and probably in the case of IE it should be selected by default.

Us Fx users can uncheck it, but I think you'll find most security experts will recommend updating even if you use it for nothing besides windows update.

October Dutch released!

Torrent

http://autopatcher.scarywater.net/AutoPatc...ULL.exe.torrent

Http

http://autopatcher.cachefly.net/AutoPatche...06_NLD_FULL.exe

Bandwidth provided by Cachefly.com

MD5-d2b942f50dade3c594fa6e04f7412427

Edited by Oddstar

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

Yes, you can create a defaults file. check out this thread for details

Although for us dialup-users, how much more bigger will that make the download. I mean XP updates don't have IE, but Win 2k updates do.

The IE7 installer from the MS website is 14.8MB, I'm not sure how compressed that is, so that size may decrease when it's packaged with APXP.

1st for all connected with this exceptional program.... thanks.

Now for a possible add-on to the next update. There have been isolated reports that the installation of

Crictical security update KB917422 (MS06-051), causing some isolated problems with programs that some people might have to run. Especially, some Electronic Arts games (check their website for updated info) and

some other programs (as listed in Microsoft patch update info to fix it).

http://support.microsoft.com/?kbid=924867

Apparently, this is not available via Windows Update... but, only to resolve issues related to specific problems you might have running certain programs?????? So, possibly can be added to the Recommended Updates area, if you are so inclined?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nvidia is your issue more so than linux itself. I did used it for a while with an old 1060 3gb, but using propietary drivers was kind of messy.
    • Qmmp 2.3.3 by Razvan Serea Qmmp (Qt-based MultiMedia Player) is a free, open-source audio player that delivers a classic music listening experience with a modern foundation. Inspired by the legendary Winamp, Qmmp features a familiar, customizable interface that supports both Winamp and XMMS skins, making it instantly recognizable to long-time users. It handles a wide variety of audio formats including MP3, OGG Vorbis, FLAC, WAV, AAC, and many others, ensuring smooth playback across diverse music libraries. In addition to basic playback, Qmmp offers advanced features such as a 10-band equalizer, crossfading, gapless playback, and audio visualization plugins. Users can manage playlists efficiently, create and save multiple lists, and even enable streaming from online sources. Plugin support extends the player’s capabilities, allowing integration of features like lyrics display, ReplayGain, and more. Built with the Qt framework, Qmmp runs smoothly and efficiently, making it ideal even for older systems. 10 great QMMP features you might not know: Global Hotkeys Support – Control playback using customizable system-wide keyboard shortcuts. CUE Sheet Support – Automatically detects and plays tracks from CUE files for full album playback. Last.fm Scrobbling – Integrated support for sending playback data to Last.fm. Audio CD Playback – Play music directly from audio CDs. Command Line Interface – Control Qmmp via command-line options for scripting or automation. System Tray Integration – Minimize to and control playback from the system tray. MPRIS Support – Integration with desktop media player controls via the MPRIS (Media Player Remote Interfacing Specification) interface. Spectrum Analyzer and Oscilloscope – Built-in visualizations for real-time audio feedback. Configurable Notifications – Custom pop-ups for track changes and playback status. Multiple Output Backends – Support for ALSA, PulseAudio, JACK, and more, offering flexible audio routing. Qmmp 2.3.3 changelog: fixed build with PipeWire versions less than 0.3.50; fixed settings dialog layout; fixed default CUE encoding; fixed possible null pointer dereference; fixed tracks order when added using drag and drop (2.3.3 only); fixed uninitialized structure usage; improved sid plugin: added libsidplayfp 3.0 support; added feature to build without residfp engine; fixed memory leak; fixed displaying audio information; updated Japanese translation (2.3.3 only). Download: Qmmp 64-bit | 24.0 MB (Open Source) Download: Qmmp 32-bit | 24.1 MB View: Qmmp Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.3 is out.
    • The current Statcoungter desktop numbers has Google Chrome increasing it's market share this past year and currently commanding 75% share. Everybody else is just making up the numbers with even MS Edge losing 3% this past year and has dipped just below 10% share which is staggering considering it's default on every Windows deviced purchased. If these numbers are correct that terrible Edge number is both devastating and embarrassing for MS especially when you add in the terribly low Bing market share. This leads me to ask a couple of questions as the default browser holding just less than 10% market share seems really weird. It used to be that all Chromium browsers were being counted as Google Chrome in some cases.  Is this still happening? Do these high Google Chrome numbers contains some Edge user numbers?
  • Recent Achievements

    • Rookie
      moog19 went up a rank
      Rookie
    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      Steven P.
      68
    5. 5
      FloatingFatMan
      63
  • Tell a friend

    Love Neowin? Tell a friend!