AutoPatcher XP October 2006


Recommended Posts

I think there is a bug in October release, you cant save as default (hold shift and hover mouse over modules details).. it always go into module details ...

This feature works in Sept 2006

I think that Sep is 5.1.35, and Oct is 5.1.37. This version appearantly has a bug.

Pardon the total noob questions here but... I always install my updates the same way. I dl them and save them to my desktop, then shut everything down and install from there. I have never had a problem with this. When I tried that with the October 06 XP update, it got about 1/2 way through installing and then Windows just shut down and rebooted. This has never happened before. It has always asked me in the past if I wanted to reboot immediately and then gave me a countdown... So far, I am assuming that it was normal, that it was just designed that way this time, and that the counter telling me when it was going to be finished was just wrong and it finished faster than expected. Even though I am assuming this, however, I would still like some sort of reassurance, if possible. Is this normal or have I done something wrong or is it a problem with the update itself?

Thank you for your patience (If in fact you are patient...) Thank you for helping anyway if you are not... :)

I've had reboots on two machines so far. I had to run Autopatcher again and reselect my preferences again, then it ran through with no problem.

Not sure which module is causing the reboots.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

Same here... :huh:

Never had such problems.

After the reboots, AP detected what was successfully installed & what was still missing - a few cycles like this, and I completed the whole October update.

This makes a third report of the reboots - could you guys nail that? If there's a log or something that you may need, tell me - I'm currently on my Win2k machine though.

I had the October Update installed on several XP machines and noticed that reboots occur on specific configurations though I have yet to pinpoint the exact cause.

I do agree that IE7 should be included perhaps with the next release.

...

I do agree that IE7 should be included perhaps with the next release.

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

-------

On a side note... I expect Gandolas to drop by with good news for us Portuguese users. :whistle:

Let's not force stuff as that onto others, shall we? For that we already got some other MS products... :p

Now if you say that it would only be as an optional update, then I'd keep my mouth shut 'cause we don't really need to use IE to access the 'Net (read, FireFox is already doing my browsing). ;)

If it's on windows update, it should be in autopatcher, and probably in the case of IE it should be selected by default.

Us Fx users can uncheck it, but I think you'll find most security experts will recommend updating even if you use it for nothing besides windows update.

October Dutch released!

Torrent

http://autopatcher.scarywater.net/AutoPatc...ULL.exe.torrent

Http

http://autopatcher.cachefly.net/AutoPatche...06_NLD_FULL.exe

Bandwidth provided by Cachefly.com

MD5-d2b942f50dade3c594fa6e04f7412427

Edited by Oddstar

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

I am curious how it decides what items should be installed by default. I think it does a great job but have some registry tweaks I'd like to add which leads me to my real question. Is there a way I could create a text file or something to go along with AutoPatcher that would automatically select certain items? I would like to run this after a fresh format and at that point, I can easily be assured that everything should be the same on the computers. Therefore, a simple way to automatically check certain registry tweak boxes would be great!

Thanks for a great program, too!

Yes, you can create a defaults file. check out this thread for details

Although for us dialup-users, how much more bigger will that make the download. I mean XP updates don't have IE, but Win 2k updates do.

The IE7 installer from the MS website is 14.8MB, I'm not sure how compressed that is, so that size may decrease when it's packaged with APXP.

1st for all connected with this exceptional program.... thanks.

Now for a possible add-on to the next update. There have been isolated reports that the installation of

Crictical security update KB917422 (MS06-051), causing some isolated problems with programs that some people might have to run. Especially, some Electronic Arts games (check their website for updated info) and

some other programs (as listed in Microsoft patch update info to fix it).

http://support.microsoft.com/?kbid=924867

Apparently, this is not available via Windows Update... but, only to resolve issues related to specific problems you might have running certain programs?????? So, possibly can be added to the Recommended Updates area, if you are so inclined?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Absolutely NOBODY has suggested such a conclusion. I am affirming the sober reality check that AV2's overall market adoption will take longer than AV1's adoption rate -- which, by the way, is the whole point of the article! While PCI-SIG is productive (on paper), other WGs have created all sorts of confusing progress plans that consumers have tuned-out of their improvements... HTML/W3C, USB, HDMI, BT, WIFI (ieee802.11) as a few other groups where spec naming conventions, split progress paths, overlapping ambitions... I'm not critiquing the AV specs group; I'm simply affirming that adoption for AV2 faces headwinds beyond the macroeconomics of it all.
    • Segra 1.5.2 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.5.2 changelog: Settings: Added an Airplane Mode that hides account, login, and upload features. Storage: Added a button to migrate videos into the recording path after changing it. Import: Added auto-scroll and a highlight pulse to videos right after importing. Recording: Added graceful handling of low disk space and output failures, finalizing files safely with clear errors. Recording: Added a guard blocking recording when any drive exceeds 99% full. OBS: Removed the download timeout to support users with slow internet. Clips: Fixed an error modal incorrectly appearing when clip creation was cancelled. Settings: Fixed the content folder path not refreshing in the UI after changes. Updates: Improved error handling for multiple simultaneous update checks. Stability: Fixed a WebSocket reconnect loop that ran while the window was backgrounded. Dependencies: Updated project dependencies. Maintenance: Removed dead code, reduced duplication, and fixed several latent bugs. Download: Segra 1.5.2 | 73.1 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • No thanks! WebView trash is unacceptable. I only use software that's native.
  • Recent Achievements

    • Collaborator
      Asgardi earned a badge
      Collaborator
    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      PsYcHoKiLLa
      245
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      69
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!