List Your Overclocks..

[murfster]

Whats he using for cooling?

I'm not sure ... couldn't find it in his sig; however, most of the extreme hardmodders are using some sort of liquid cooling. I would imagine he is as well (BTW, sorry for the big pic ... it's his ... not mine).

[Standardwolve]

I have an AMD 1800+(1535mhz). I've gotten it up to 2004mhz(stable) with a speeze 3200+ cooler. I'm happy so far until I get a new processor.

[oldaccount1]

mine is bigger

[the_snitch]

got my 3ghz p4c up to about 3.6/3.7, but i didnt keep it that high as i had to run my memory at 3:2 so although the processer was up high, the memory was slower than normal so in the end...its not worth it.

[Ecander]

I'm not sure ... couldn't find it in his sig; however, most of the extreme hardmodders are using some sort of liquid cooling. I would imagine he is as well (BTW, sorry for the big pic ... it's his ... not mine).

Yeah I am about to hardmod my northbridge so I can supass my 3.57Ghz barrier. It will do 3.78 at 5:4 but I want 1:1

[tickbabies]

1.83ghz @ 2.5ghz

same clock speed lower voltage and she runs stable

[Labtec]

Nothing major, but here's mine:

P4 2.4C @ 3.0 Ghz (200 bus to 250 and 5:4 memory timings for PC3200 Ram)

Temperature:

I can overclock to 280 bus or 3.36 Ghz, but it isn't stable (probably because of ram). Cooling: Zalman Alcu7000 w/ Artic Silver 5.

Barton 2500 @ 3200 (1.8 ghz 166 bus to 2.2 ghz 200 bus)

Temperature:

Can go to 210 bus or 2.3 ghz but freezes randomly after a few hours so I just leave it at 200 bus. Cooling: Cooljag JVC258A w/ copper base (pretty cheap yet effective) w/ Artic Silver 5.

Edited June 5, 2004 by Labtec

[Phil Gates]

How stable is that? I can get my Barton 2600+ to 11x200 but it crashes UT2k4. In Windows it's golden, though so I'm running at 11.5x183 now.

my 2500+ is stable at 3200+ speeds :huh:

[Arrowhead]

When i get my new radiator and D-Tek Whitewater water block, i should be able to get 2.6 - 2.65 from my 2600 Tbred.

Ill post some pics later when i get the kit in, in the middle of crappy A-Levels.

[.weir]

AMD Athlon XP 2100+ Thuroughbred

[stock] 133MHz core x 13 = 1.79GHz 266MHz FSB @ 1.6V

[stable] 166MHz core x 12 = 2.00 GHz 333MHz FSB @ 1.7V

GB-Micro PC2700 DDR RAM

[stock] 2.5 - 3 - 3 - 6 @ 2.6V

[stable] 2 - 2 - 2 - 11 @ 2.8V

Chaintech GeForce FX5700LE 128MB

[stock] 250MHz clock/400MHz mem

[stable] 325MHz clock/500MHz mem

Best performance I've gotten out of this setup stable, so I think I'm just gonna leave it . . . but that's kinda boring, so I might have to build a new system soon and how far I can push that

[Yuxi]

Pentium 4 2.4C overclocked to 2.81GHz. Stock cooling.

[zigaroo]

Pentium 4 2.4C overclocked to 2.81GHz. Stock cooling.

That's it? The 2.4c is able to run stable at 3.2 with stock cooling, and up to 3.8ghz with more aggressive cooling.

What kind of RAM do you have?

[Yuxi]

That's it? The 2.4c is able to run stable at 3.2 with stock cooling, and up to 3.8ghz with more aggressive cooling.

What kind of RAM do you have?

The RAM is one stick Corsair PC3200 512MB. I had to set the DDR voltage to 2.7 to make it stable. The motherboard only allows 2.5, 2.6, or 2.7.

The CPU works (although unstablely) up to 2.99GHz. Anything higher than that and it won't boot. Raising the CPU voltage doesn't help.

Right now, it's only 76F idle and 85F load.

The motherboard is Asus P4S800. There is a fan at the top of the case and another one on the side.

[Yuxi]

What's the maximum safe voltage for the P4 2.4C?

[zigaroo]

What's the maximum safe voltage for the P4 2.4C?

I've seen people at 1.8 with them, where they are pushing the CPU to 150% OC's. However I run mine at ~1.65v.

Have you tried changing your FSB:RAM ratios? I understand 1:1 will yield best results, however when I went from my fastest 1:1 OC, to fastest 3:2 OC, I saw the 3:2 ratio to be faster (Maybe because my 1:1 couldn't get there to compare).

[Yuxi]

I bumped up the voltage to 1.6, and now it's reliable at 3.19GHz. That's as fast as the FSB will go. 1.6 is the maximum voltage I can select in the BIOS.

I had to slow down the ram to make it work faster than 2.7GHz.

[bettyswolloks]

Im running an 2500+ Barton at 3200+ (2.2) on a pc-chips m848A board,fsb set 200,it runs all day and night a steady as a rock :)

[spiffy0517]

radeon 9800pro (bios swap to xt) stock core/mem 378/337 oc 465/391 :cool:

[kramitman_87]

7petra giga watts spuer fillitoped to 18 petra supergiga watts at 700 ringger danglers

i thought i did a nice job overclocking my super system

[whitedragon]

see my sig...

[Lanky]

Becuase my 9800 pro is an AIW top overclocks for me on stock cooling are limited to about 20 for the core and 20 for the mem,

[takuy4]

athlon XP 2500+ (1.83) OC to 2.31Ghz (FSB 200*12.0 vcore @ 1.750v) on A7N8X deluxe mobo.... the highest i pushed with my proc is 2.695ghz with same mobo FSB 245*11 vcore @ 1.850v.. thanks to my mate who lent his Kingston hyper X DDR466 1GB module. my bottleneck is my ram at the moment.

[Khujo]

1:1 Memory

[tickbabies]

not bad khujo. ;)

[Godson]

hi first post :p

i have a amd athlon 2800+ cooled with a coolermaster aero 7+ with 512mb pc3200 ddr400mhz

mobo = msi k7n2 (nforce2)

geforce fx 5600 (256mb ddr)

so what potential have i got? im nt exactly gr8 at this.