List Your Overclocks..

[beniza]

Heres mine using a Silent boost and a Generic 3200DDR Ram and CPU is a unlock 2500+

Mobo is NF7 none S. Just need better cooling cause i get 38idle and 45 full load on games.

[RZombie]

just hit 243fsb :) im getting there, but i belive i might dip my hands in some of the new crucial memory , suppose to be pc3200 that can do 250fsb @ tight ass timings, comes DDR400 @ 6-2-2-2 stock

[Ecander]

Got my Vapochill XE up and running currently 4.01Ghz and climbing. current benches (no 3d ones because GPU is in RMA)

[Circaflex]

^^ SCREW YOU guy. haha im jk, sweet overclock. Now youll have that EXOS purely dedicated for the video, one sweet rig you have there.

[Ecander]

^^ SCREW YOU guy. haha im jk, sweet overclock. Now youll have that EXOS purely dedicated for the video, one sweet rig you have there.

Thanks :laugh:

I hit 4.3Ghz at 5:4 but I am not satisfied with the memory performance. I have to do a Capacitor mod to the mobo to stablize the DDRvtt to help out the northbridge. I sometimes I wish I had a P4C800-E because the DDRvtt is upped with the CPU vcore.

[+s55 Subscriber¹]

Cpu is a barton 2800 running at 3200. can take it futher but am waiting on water cooling before i go anywhere

My GPU is a Geforce FX 5700Ultra running at 600Mhz Core 1~1.1ghz DDR2 (Memory is really picky with some games. I think extra cooling would allow 1.1 stable) < When the case is open and have deskfan pointed at it < again someone needs to donate me a water cooling kit :p

Stock Speed are 475 core 906 Mem.

If the case is closed i usually run at 525 / 1ghz otherwise it gets 2 warm - have 2 80mm fans fireing at it on top of the stock cooling

anyone beat this i will slaughter them :p Serisuoly u dunno how long it took me to get it running stable at 600mhz

[Ecander]

Yeah I had my 5900XT running at 600/1050 scoring over 7200 3dmarks in 03 with a 2.8E P4 @ 3.4Ghz. I got it to [email protected] and the voltage regulator mosfet blew. I RMA'd the card with the manufacturer and am awaiting replacement :laugh:

Ohh I forgot to mention the stocks were 390/700 :p

[+s55 Subscriber¹]

theres always someone... *suttely says a few "nice" words :p*

anyway thts a nice overclock...

what cooling are u using?

and what brand of card where u using?

if it wasnt for the fact tht i dont have ?150 to replace my card i wud be voltmodding too but really i aint gonna push it tht far... at least not unti this machine becomes a spare when i get my nu machine prob next year

last time i 3dmarks it with the overclock i think it was about 5100 ish i got... which is pretty darn good of a mid range card....

[Ecander]

My CPU is cooled with a Asetek Vapochill XE Phase Change cooling system -32.5C capable.

My Northbridge is cooled by a Koolance GPU-108V Waterblock

My GPU is cooled by a Koolance GPU-108H Waterblock

The waterblocks are powered by a Koolance EXOS-Al

The GPU is/was a Leadtek A350 XT TDH (aka 5900XT) with voltmods and OCZ Copper BGA Ramsinks. I was lucky enough to get a card with Hynix AF-22 2.2ns GDDR2 memory :D

Also yes for a midrange card that is a good bench. I could barely hit 5,000 with my 9600XT I had lying around..which is why my current 3d benches are TBD lol

[Bart]

Barton 2500+ Desktop @ 2.45 @ 1.95v @ 24c (Air cooled, quiet, next to central air vent)

9800PRO @ XT @ 470/400 @ 1.79v (Giant 3, vold mods, next to central air vent)

P4 1.7 Willamette @ 2.0 @ 1.75v @ 39c (Air cooled, oc'ed while next to central air vent)

I don't remember my other overclocks, did a p4 @ 3.8ghz a while ago... anyway, i'll probably never see this thread again, so if you have questions pm me plz. lata

[Samoa]

2.6ghz 400FSB with a 2600 AthlonXP mobile cpu. (Y) :D

[grandbacon]

On NF-7 mobo. Barton 2500+ (1.83) at 2.3 ghz, already unlocked upon purchase from newegg, any higher would lose stability, and cause automatic shutdowns. Using a Volcano 12 heatsink, which i dont recommend using actually, its not THAT loud, however it generates ALOT of heat, affecting room temp dramatically :/

[Digitalis]

Mobile 2500+ @ 2.5ghz @ 1.8V - 218 x 11.5

[RZombie]

[Adnan248999]

The best I could do for now with this processor though I do think there is still another few drops of juice to squeeze from it.

[mattesca]

I have a mobile 2400XP, Abit NF7-S, and an SP-97 and are running at 2.5Ghz at 1.75Vcore...cant get any higher but hell of a good OC.

[Neolink]

standard 2400+ @ 200x11 2205Mhz - 1.75v - A7N8X 1.04 - ALX800 with a silent 80mm fan... Scores higher than a real 3200+ :)

mobo is deffo holding me back as my temps are 34c idle and 38c max load :crazy:

[Tarzan2k]

Mobile athlon 2500+ @ 2700MHz

T-Bred B Athlon XP 2600+ @ 2450MHz

Mobile barton 2600+ @ 2680MHz

[nugg3t]

i currently have a amd 2800+ barton @ amd 3000+ ([email protected])

cpu temp: 47?c

[uniacid]

currently have my P4 3Ghz C Northwood at 3.6 on stock volt and idle at 34?C

[sickpuppy]

my thoro B AMD Athlon 2600+ is at 2138mhz - 225fsbx9.5 with Corsair PC3700 TwinX on DFI NFII Infinity mobo (nice OCers board), have had it upto 233x9.5 but gets too unstable to be reliable :(

[Samoa]

I have a mobile 2400XP, Abit NF7-S, and an SP-97 and are running at 2.5Ghz at 1.75Vcore...cant get any higher but hell of a good OC.

1.85v should do 2.6ghz then... ;)

[stncttr908 Veteran]

GF's Shuttle SN45G w/XP-M 2400+ 35W @ 3200+ @ 1.65 vcore.

The voltage could probably be lower, but I've got it up there to be safe.

[Dergro]

Abit KV8 Max3 - A64 3000+ @ 2.45Ghz 1.65V

[Samoa]

^ That'd be nice, but no vcore in the pic ;)

2600 AthlonXP Mobile @ 2.4ghz 400FSB, 1.65v core. Been nice and cool as well as stable as hell. :D