List Your Overclocks..

[Dennis]

Here is my overclock:

[Ruciz]

My 48x24x48x burner to a nice 52x24x52x burner. My Apex DVD player into a Sampo, and my 2500+ running at 2.01GHz on PC-2700 and A7-v333 board. Need some fanless coolant., time to get a water cooled system... :D

[Khujo]

not bad khujo. ;)

thanks, i have the 3.0C but swapped that back out for the Northwood at higher clock speed, i think that would do me right for the time being, SSE3 was only supported by one program i used, though the Prescott definately (intensive tasks) multitasks better then a northwood, intel says its improved HT, i think it has more to do with the cache increase. also the temperature's are back to levels that don't heat the room or feel like i'll burn down the house, even at such overclocked speeds, i think the cpu could go a tiny bit higher but the ram is loosing stabiity with the higher multiplier,.

[takuy4]

hi first post :p

i have a amd athlon 2800+ cooled with a coolermaster aero 7+ with 512mb pc3200 ddr400mhz

mobo = msi k7n2 (nforce2)

geforce fx 5600 (256mb ddr)

so what potential have i got? im nt exactly gr8 at this.

Go to this webpage and you'll see a list of OC speeds ppl have attained. Mind you that its just a guide and all procs are not the same so you might get either good or bad OC ... =) good luck

webpage

[Godson]

thanks :D

[Tarzan2k]

AMD Athlon XP (barton mobile) 2600+ @ 2580MHz (1.85V)

[RZombie]

been foolin around with my xpm2400 and got

200x11 @ 1.55volts (prime and 3d stable)

200x12 @ 1.75volts (prime and 3d stable)

225x12 @ 2volts (prime and 3d stable)

235x11 @ 1.95volts (prime and 3d stable)

238x10 @ 1.7volts ( not prime or 3d stable) - (need better memory)

[Samoa]

2600XP-M @ 2.5ghz 400FSB, 1.85v, stable as hell (Y)

Plan to put in my two better, noiser, fans and maybe a bios flash, possibly an L12mod, to push 2.6ghz and 2.7ghz. :D

But it's running so sweet now, I'm kinda shy to mess with it. But maybe 2.6ghz with just a fan upgrade? :shifty:

[Samoa]

didn't wait.

2600XP-M @ 2.6ghz 400FSB, 1.95v :D

I will try 2.7ghz tomorrow. (Y)

[Homer]

Careful Samoa, you'll be ****ed if it crap out on ya. :unsure:

[Samoa]

Careful Samoa, you'll be ****ed if it crap out on ya:unsure:e:

Thanks for the concern(Y)Y) I got it running at 2.6ghz 400FSB, 1.9vcore now. It's running nicely:D:D

[Aleck79]

Thanks for the concern. (Y) I got it running at 2.6ghz 400FSB, 1.9vcore now. It's running nicely. :D

what kind of cooling you got on that thing?

[Ecander]

Latest o/c Leadtek GeForce FX 5900XT stock 390/700 o/c 450/1Ghz. See sig for new bench scores :woot:

[Samoa]

2600XP-M @ 2.7ghz 400FSB. And man is it hot!!!! :pinch:

what kind of cooling you got on that thing?

SP97 with a Quiet 92mm Case fan. Three other Case fans, and a Vantec TMD fan for heat exhaust. Not too mention AS5. Does alright, but unless I get a 120mm fan or water cooling, I'm pushing it's limits.

[Doolop]

XP 2400 to 2600, but its nuthing without the barton core, as of now i have palemino

[Enisada]

I run multiple overclocks...

XP2600 @ 2400Mhz

XP2800 @ 2400Mhz

Soon to add Athlon64 3500+ to the mix...

[Argote]

OC'd k6-2 in 2nd rig from 400 to 500 mhz

OC'd Geforce 2 MX400 in main rig from 200/166 to 220/175

gotta upgrade soon

[iller]

XP2500 barton @ 202x12= 2424MHz

[RZombie]

not bad for some value ram ;) more to come soon, gettin ready to crank it up to 3.3v on the mem :) settin @ 3.1v now, hopefully i can hit 240fsb (does 238 but not stable) after vdd and vtt mods,

Edited June 26, 2004 by existz

[RZombie]

well for some reason it wont let me edit my last post, so sorry for double posting, but i cranked it up to 3.2v and got 239fsb out of it, @ 11-3-3-2.5 but it would'nt do 240 no matter what, but hell still not bad for corsair value select , lol, also ran sandra on the ram and got 3616/3353

cpuz/sandra 239fsb

[boshi]

Right now I'm running a 2500+ mobile at 2.6 ( 210x12.5 ) I'm very dissapointed as this is on water at 2.0v. :( Hopefully I'll do better with the chiller I'm working on.

Also running an ATi 9700TX at 410/310, I'm gonna voltage mod it this week, hopefully I'll get more out of it.

[stncttr908 Veteran]

I had my 9800 Pro doing 3dmark03 loops yesterday at 448 on the core. Too bad my RAM clocks suck. (N)

[Ricardo Gil]

I upped my cpu bus from 100 to 133. Got my Celeron 900 running at 1200. That's a 33% increase in performance. Beat that!

[Samoa]

Update..

I had to purchase a new mobo to RMA my last.

I've gotten 2.5ghz @ 1.75v, stable, and 2.6ghz @ 1.85v, stable.

Just need to get some watercooling...wait...

I just won some on Ebay...I should be getting that soon :D

Edited July 4, 2004 by Samoa

[DUZLA+]

AMD Mobile barton xp2500 @ 185mhz:12x with gigabyte copper heatpipe 40c temp. Can go alot higher but the mobo sux

GF4Ti128 stock :250/400 @ 325/555.