List Your Overclocks..


Recommended Posts

  • 2 weeks later...

my new amd 2400+ runs hapily@ 2600+ 142*15 , but i dont like the temp hanging around at 65-70 deg c , so i am going to leave it until i can get the best heatsink and fan , and ide also like to get soem ramsinks

i dare say it will even push a little further, but im not going to try until i get the cooling, my current cooling is the stock heatsink and fan, with 5 80mm case fans, 2 in front, 1 in side, 2 out back, i also want to add a chimney blowghole, but im scared of scratching my new case up

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

P4 1.6a @ 2.43ghz  with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

i sure am...and i am really lucky i did a ton of research and lurking on madonion.com (now futuremark). tons of people were getting the 1.6a chips from a certain area of the world (i dont remmeber where it was now...maybe malaysia but that doesnt sound right....) just because they overclock so well. they even made a 1.6a club on madonion and i think a few people got it up to 2.6 or so with stock cooling.

i bet i could up it much more but i dont want to full with the voltages too much or its gonna die :(.

next chip is a 3ghz with best version of gf fx :D

  • 2 weeks later...

:ninja: OK iTS a duron 1300 oc'ed to 1430 at 110 fsb. At this moment its running with some samsung pc-100 sdram(cas 3 but runs at cas 2) but I will replace with ddr soon. also...better cooling to come soon! Sorry bout the double post.....too much appelton rum!!!

Current CPU is due for replacement but is a T-Bird 1400 @ 1600 with watercooling.

Previous overclocks include

Air Cooled T-Bird 1000 @ 1200

Air Cooled Celeron 566 @ 926mhz (good oc, pity it was a celery)

Air Cooled Pentuim II 333 @ 400 (my very first oc)

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

well for starters i think its an 1800+ tbred b. but i havent checked in a while and i may be confusing the intel 1800 c1 ive been lusting over...

ok and i have an 1800+ palomino that can sadly only run at 1800 mhz

and since there doesnt seem to be anyone overclocking radeons... 8500 aiw up to 300 core and 310 ram

Processor(s)

Model : AMD Athlon XP 2100+

Speed : 1.83GHz

Model Number : 2100 (estimated)

Performance Rating : PR2658 (estimated)

Model : ASUSTeK Computer Inc A7V333 Mainboard KT333 CPU to PCI Bridge

Front Side Bus Speed : 2x 141MHz (282MHz data rate)

Max. Bus Bandwidth : 2256MB/s (estimated)

Logical/Chipset Memory Banks

Bank 0 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank 1 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank Interleave : 4-way

Memory Bus Speed : 2x 176MHz (352MHz data rate)

Max. Memory Bandwidth : 2816MB/s (estimated)

  • 2 weeks later...

:shifty: I just replaced my Duron 1.3 that wuz running on a K7S5A @1465mhz with a tbred b 1700 Jiucb with PC-133. Right now first shot at 1.61gb at 147fsb....need some ddr. This is running stable with a 250watt enlight p/s. Temps are real cool 34c no-load.....37c load with fan on low. Usually this board needs larger p/s but its ok. I will try 166mhz but I doubt it will work. :blink:

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
    • I guess we are done since you refuse to read my comment you replied to or my other comment in another thread you were also a part of here.
  • Recent Achievements

    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
    • Week One Done
      Markus94287 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!