List Your Overclocks..


Recommended Posts

  • 2 weeks later...

my new amd 2400+ runs hapily@ 2600+ 142*15 , but i dont like the temp hanging around at 65-70 deg c , so i am going to leave it until i can get the best heatsink and fan , and ide also like to get soem ramsinks

i dare say it will even push a little further, but im not going to try until i get the cooling, my current cooling is the stock heatsink and fan, with 5 80mm case fans, 2 in front, 1 in side, 2 out back, i also want to add a chimney blowghole, but im scared of scratching my new case up

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

P4 1.6a @ 2.43ghz  with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

i sure am...and i am really lucky i did a ton of research and lurking on madonion.com (now futuremark). tons of people were getting the 1.6a chips from a certain area of the world (i dont remmeber where it was now...maybe malaysia but that doesnt sound right....) just because they overclock so well. they even made a 1.6a club on madonion and i think a few people got it up to 2.6 or so with stock cooling.

i bet i could up it much more but i dont want to full with the voltages too much or its gonna die :(.

next chip is a 3ghz with best version of gf fx :D

  • 2 weeks later...

:ninja: OK iTS a duron 1300 oc'ed to 1430 at 110 fsb. At this moment its running with some samsung pc-100 sdram(cas 3 but runs at cas 2) but I will replace with ddr soon. also...better cooling to come soon! Sorry bout the double post.....too much appelton rum!!!

Current CPU is due for replacement but is a T-Bird 1400 @ 1600 with watercooling.

Previous overclocks include

Air Cooled T-Bird 1000 @ 1200

Air Cooled Celeron 566 @ 926mhz (good oc, pity it was a celery)

Air Cooled Pentuim II 333 @ 400 (my very first oc)

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

well for starters i think its an 1800+ tbred b. but i havent checked in a while and i may be confusing the intel 1800 c1 ive been lusting over...

ok and i have an 1800+ palomino that can sadly only run at 1800 mhz

and since there doesnt seem to be anyone overclocking radeons... 8500 aiw up to 300 core and 310 ram

Processor(s)

Model : AMD Athlon XP 2100+

Speed : 1.83GHz

Model Number : 2100 (estimated)

Performance Rating : PR2658 (estimated)

Model : ASUSTeK Computer Inc A7V333 Mainboard KT333 CPU to PCI Bridge

Front Side Bus Speed : 2x 141MHz (282MHz data rate)

Max. Bus Bandwidth : 2256MB/s (estimated)

Logical/Chipset Memory Banks

Bank 0 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank 1 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank Interleave : 4-way

Memory Bus Speed : 2x 176MHz (352MHz data rate)

Max. Memory Bandwidth : 2816MB/s (estimated)

  • 2 weeks later...

:shifty: I just replaced my Duron 1.3 that wuz running on a K7S5A @1465mhz with a tbred b 1700 Jiucb with PC-133. Right now first shot at 1.61gb at 147fsb....need some ddr. This is running stable with a 250watt enlight p/s. Temps are real cool 34c no-load.....37c load with fan on low. Usually this board needs larger p/s but its ok. I will try 166mhz but I doubt it will work. :blink:

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • HWMonitor 1.64 by Razvan Serea HWMonitor is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T, and video card GPU temperature. Special hardware monitors such as abit® uGuru and Gigabyte® ODIN™ power supplies serie are supported too. HWMonitor 1.64 changelog: Intel Arc G3 & G3 Extreme (Panther Lake). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). AMD Ryzen 7 7700X3D (Raphael). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). Support of HUDIMM and HSODIMM memory modules. New themes. New real-time graphs. Download: HWMonitor 1.64 | 3.4 MB (Freeware) Download: Portable HWMonitor 1.64 | 2.7 MB View: HWMonitor Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I have had a request since 2017 and so have many others that requested too and nothing has been done about it except its on our list to do.
    • I think it might be behind the trailer park amusements?
    • Some people don’t like them but plenty more enjoy what they have to offer. Check the value of the company.
    • Not such a great deal, Ultimate, which gives you full 5080 features is $181.99 CAD per month, that's $2183.88 per year, I can buy the 5080 for $1809.99 CAD, then it goes up to $279.99 per month after the first billing cycle. Typical cloud rental, costs more than buying the hardware.
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      172
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!