List Your Overclocks..


Recommended Posts

  • 2 weeks later...

my new amd 2400+ runs hapily@ 2600+ 142*15 , but i dont like the temp hanging around at 65-70 deg c , so i am going to leave it until i can get the best heatsink and fan , and ide also like to get soem ramsinks

i dare say it will even push a little further, but im not going to try until i get the cooling, my current cooling is the stock heatsink and fan, with 5 80mm case fans, 2 in front, 1 in side, 2 out back, i also want to add a chimney blowghole, but im scared of scratching my new case up

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

P4 1.6a @ 2.43ghz with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

P4 1.6a @ 2.43ghz  with STOCK COOLING and upped voltage by only .025!!!!! its one of the best overclockable chips EVER MADE.

temps are around 45c idle and 55c after gaming...which isnt too shabby considering i almost upped my chip speed by 1ghz with stock everything :-D.

i just reformatted so i have to reoverclock my gf4 ti4600 :-D

Wow thats a sweet processor. Getting almost a gig free. I'm suprised you only needed to up the voltage that much. Lucky man.

i sure am...and i am really lucky i did a ton of research and lurking on madonion.com (now futuremark). tons of people were getting the 1.6a chips from a certain area of the world (i dont remmeber where it was now...maybe malaysia but that doesnt sound right....) just because they overclock so well. they even made a 1.6a club on madonion and i think a few people got it up to 2.6 or so with stock cooling.

i bet i could up it much more but i dont want to full with the voltages too much or its gonna die :(.

next chip is a 3ghz with best version of gf fx :D

  • 2 weeks later...

:ninja: OK iTS a duron 1300 oc'ed to 1430 at 110 fsb. At this moment its running with some samsung pc-100 sdram(cas 3 but runs at cas 2) but I will replace with ddr soon. also...better cooling to come soon! Sorry bout the double post.....too much appelton rum!!!

Current CPU is due for replacement but is a T-Bird 1400 @ 1600 with watercooling.

Previous overclocks include

Air Cooled T-Bird 1000 @ 1200

Air Cooled Celeron 566 @ 926mhz (good oc, pity it was a celery)

Air Cooled Pentuim II 333 @ 400 (my very first oc)

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

Any suggestions on what seems to be the most oc'able Athlon XP at the moment?

well for starters i think its an 1800+ tbred b. but i havent checked in a while and i may be confusing the intel 1800 c1 ive been lusting over...

ok and i have an 1800+ palomino that can sadly only run at 1800 mhz

and since there doesnt seem to be anyone overclocking radeons... 8500 aiw up to 300 core and 310 ram

Processor(s)

Model : AMD Athlon XP 2100+

Speed : 1.83GHz

Model Number : 2100 (estimated)

Performance Rating : PR2658 (estimated)

Model : ASUSTeK Computer Inc A7V333 Mainboard KT333 CPU to PCI Bridge

Front Side Bus Speed : 2x 141MHz (282MHz data rate)

Max. Bus Bandwidth : 2256MB/s (estimated)

Logical/Chipset Memory Banks

Bank 0 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank 1 Setting : 256MB DDR-SDRAM 2.0-2-2CL 1CMD

Bank Interleave : 4-way

Memory Bus Speed : 2x 176MHz (352MHz data rate)

Max. Memory Bandwidth : 2816MB/s (estimated)

  • 2 weeks later...

:shifty: I just replaced my Duron 1.3 that wuz running on a K7S5A @1465mhz with a tbred b 1700 Jiucb with PC-133. Right now first shot at 1.61gb at 147fsb....need some ddr. This is running stable with a 250watt enlight p/s. Temps are real cool 34c no-load.....37c load with fan on low. Usually this board needs larger p/s but its ok. I will try 166mhz but I doubt it will work. :blink:

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!