List Your Overclocks..


Recommended Posts

no water cooling, she's a air breather, with a swiftech mcx4000 (awesome heatsink!) with a thermaltake smartfan 2.

Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95.

p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100)

post-49-1051701811.jpg

not much here. i did have my xp 2000+ running at 1800mhz, but it was getting a bit too hot so i just dropped it back down to almost factory settings. and my ti4600 is barely overclocked at all... i would overclock if i had any cooling whatsoever in here - i don't even have any thermal paste on my processor, neither do i have any case fans. my cpu runs at around 55 idle, 60-65 load, and the case temp is around 50... :blush:

as soon as i get me a job, i'll get some cooling and crank her up a bit.

post-49-1051702398.jpg

no water cooling, she's a air breather, with a swiftech mcx4000 (awesome heatsink!) with a thermaltake smartfan 2.

Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95.

p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100)

is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it? :blink:

no water cooling, she's a air breather, with a swiftech mcx4000  (awesome heatsink!) with a thermaltake smartfan 2.

Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95.

p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100)

is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it? :blink:

its a 533 board sis 655 chipset

no water cooling, she's a air breather, with a swiftech mcx4000? (awesome heatsink!) with a thermaltake smartfan 2.

Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95.

p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100)

is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it?:blink::

its a 533 board sis 655 chipset

so wat ure trying to tell me is that you've overclocked an [email protected] to 3.4, and taken your fsb to 633 from 533 without water cooling with just a heatsink and a fan????

wats ure mobo? MSI? Soyo?...and what kind of Tower do you have?

Man I overrevved mine to about 9000 boy it didnt like that at all LOL

But any I had an Athlon 750 overclocked to 850 .. stock cooling

Now have an P3 550 to gonna risk overclocking since my athlon died just last summer un expectedly......... sigh..........

Though I working on plans to completely submerger a system and do a complete system overclock... any tips?

so wat ure trying to tell me is that you've overclocked an [email protected] to 3.4, and taken your fsb to 633 from 533 without water cooling with just a heatsink and a fan????

wats ure mobo? MSI? Soyo?...and what kind of Tower do you have?

yes its a 533 board, actually its running closer to 800fsb, like 759bus to be exact,...no water just an air breather, alot of people understimate the mcx4000 heatsink, and the p4 2.4b, its giving me a 1000 mhz overclock and the great thing about it is it rock stable.

I have a Gigabyte SinXP1394 Dual channel ddr board. i have an enermax CS-3171L-B3A tower (with the rainbow light cathodes on the sides,)

Just finished a new OC'd system:

Tbred-B 1700+ DLT3C JIUHB 0310XPMW

Epox 8rda+

512mb corsair xms3200

vantec aeroflow hsf (with as3)

Got this system running at 2900+ (2.3GHz, 11.5 x 200) on 1.625v rock solid stable.

Everything's in an antec sonata with the case fan on temp controlled and temps are 32C idle / 41C load / 28C case / 20C ambient.

Formerly I was running a P3 500E @ 667.

My system just got its revamp........

30 degrees no load and 36 degrees load

Thermaltake 8cm Smart Fan II cool mod x2

Vantec tornado 80 mm fan (ducted) on a thermalright sk-7 heatsink

bumped her up 5% in volts

added pc3500 ram

kicked her upto 1850

but im not sure about higher

I got a 2400+ @ 2450MHz (175MHz FSB) Rated 3100+

a 1700+ @ 1647MHz (150MHz FSB) Rated 2000+

and my Duron 1GHz @ 1332MHz (133MHz FSB)

I hope to push the 2400 up a little more when I get my new dual channel ram in... right now I am only using Samsung PC2700 :whistle:

I got a 2400+ @ 2450MHz (175MHz FSB) Rated 3100+

a 1700+ @ 1647MHz (150MHz FSB) Rated 2000+

and my Duron 1GHz @ 1332MHz (133MHz FSB)

I hope to push the 2400 up a little more when I get my new dual channel ram in... right now I am only using Samsung PC2700 :whistle:

i got the same cpu and motherboard( not deluxe) and samsung 3200

but if i put it higher it gets un stabel so u put the vcore higher but i had it on 1.8( wich is the max of this board) how did u do that and what r ur multiplier and fsb?

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same, never saw it on Android or iOS. Guess only some people got it *shrugs*
    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
  • Recent Achievements

    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      ATLien_0
      92
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!