List Your Overclocks..

[Matrix XII]

He has screens even *is amazed* ;)

[RZombie]

u dont like? :p

[Matrix XII]

No, I do like!! That's why I said it :)

[sandman45654]

2.7ghz Celeron running @ 3.2 ghz

Geforce 4 440MXse runing @ 325/425 (default 250/333)

[RZombie]

i would have edited but it would'nt let me :(

*** update *** finally got it stable at 2.2ghz with stock xp2000 hs/fan :) new hs/fan should be in this week, cant wait to see what i get out of it then

[Matrix XII]

2.7ghz Celeron running @ 3.2 ghz

Geforce 4 440MXse runing @ 325/425 (default 250/333)

Wow!... What kind of cooling do you have for that?

[sandman45654]

Wow!... What kind of cooling do you have for that?

Five case fans and a heatsink fan that makes my spacebar rattle :( I can here my desk humming when I go in my basement :woot: . Kinda sux lol.

[naap51stang]

The last thing I OC'd was a Cel 300A to 450.

I don't overclock anymore. I'm not a hard core gammer, I"m an old fart

who likes a nice stable system that I don't have to have a zillion fans,

screw around with the memory settings or anything else to make it run.

I slap in an intel mobo, vid card, memory, tv tuner and turn it on, install

everything and leave it alone.

The last upgrade I did was when I swapped out my 1.8 P4 to a 2.66 P4,

which also required a new pwr supply, since the system hadn't been

turned off in over a year (it's on a UPS).

I'll leave the OC'ing to all you young whipper-snappers ;)

:alien:

[Matrix XII]

Five case fans and a heatsink fan that makes my spacebar rattle :( I can here my desk humming when I go in my basement :woot: . Kinda sux lol.

That's hectic man!! I'm going to get liquid cooling in my new comp... nice and quiet :)

[sandman45654]

The worst part of it all is that the loudest fan in my rig is the one on my processor (5500 rpm's). The rest are 80mm antec silent fans. I 've been thinking about watercooling here lately but the idea of having water in a pc scares me a little. I probably will give watercooling a shot but sata raid and a new gfx card are next on my pc wish list.

THIS JUST IN!!!! My pc is the worlds largest smokeless ashtray LOL

[Samoa]

currently 2800 Athlon XP @ 2.4ghz 400FSB :D

[jaffa]

currently 2800 Athlon XP @ 2.4ghz 400FSB :D

woohoo go you! finally did it! :laugh:

anychance of getting it higher?

and what are your temps and other crap?.. :shifty:

[Samoa]

woohoo go you! finally did it!:laugh:gh:

anychance of getting it higher?

and what are your temps and other crap?.:shifty:fty:

actually no, I have a 1.85v with DDR @ 2.8, an temps are pretty low, bios says cpu is 45C, chipset 38C. my laser thermometer shows all over the board the temps range 30-34C, cpu being 34, chipset 32.

But more radical stuff needs to be done to get a stable OC higher than 2.4ghz. I thing I could pull just a tad more, but probably that TicTac bios and a MAthlonXP would be the ticket;);)

I think I could drop the Vcore and DDR voldtage some too, I might have it a little higher than necessary.

[Xylene]

I had my 2500+ Barton at 2354mhz, 428mhz FSB x 11. I didn't leave it there long in fear of heat problems, but it did run like that for about an hour. I'm running at stock now becuase I get all paranoid about my temps going about 47C at full load.

[-=SD=-]

currently 2800 Athlon XP @ 2.4ghz 400FSB :D

:(

Get to work man, you should be at 2.4 and like 430-450fsb lol :p

You should be able to use that bios (which should let you use 10 and 10.5 multiplier) I posted but if not, atleast update your SATA drivers.

https://www.neowin.net/forum/index.php?act=...dpost&p=1821611

__

[Samoa]

:(

Get to work man, you should be at 2.4 and like 430-450fsb lol :p

You should be able to use that bios (which should let you use 10 and 10.5 multiplier) I posted but if not, atleast update your SATA drivers.

https://www.neowin.net/forum/index.php?act=...dpost&p=1821611

__

I'll give it a look. I was at 11 multiplier seeing how high I could take it. got 2.4ghz 438FSB, just not very stable. Nforce2 has some problems with high FSB it seems. So that's why I am currently doing 400FSB. ;)

[Homer]

I'm now sitting at 2300mhz 418FSB.

I'll probably take it further, but right now I'm too lazy, and I might need to up the vcore some more.

SK7 = Leet.

[Homer]

For the record:

Eat that samoa :p

[enigma-penguin Veteran]

told you the sk7 would do you good :p

wierd with those vdimm settings that that was stable .. same with the v core (even tho it was only 15 mhz.. should ahve seen a bit of well oddness)

other than that.. good show chap ^__^

[Hardi]

Celeron 2,4 GHz @ 3,2 GHz , fsb 134 , temp. 37 C max. (Y)

[Samoa]

2800 Athlon XP @ 2.4ghz 440FSB :D

DDR still at 2-3-2-6, nice an fast (Y)

Temps still under 40C according to my laser thermometer. Bios says 45C/38C for cpu/chipset.

Edited March 20, 2004 by Samoa

[Wannes]

I am running at AMD Athlon XP 2600+, would that be possible to overcloack?

Couch Potato?

[ad345zAdZ0d9_]

2800 Athlon XP @ 2.4ghz 440FSB :D

DDR still at 2-3-2-6, nice an fast (Y)

Temps still under 40C according to my laser thermometer. Bios says 45C/38C for cpu/chipset.

jesus man... is that a barton core?

I'm running that processer and have to stop at 2.2ghz or things get ugly

What sort of cooling are you using - im just using starndard sink/fan pack

[Gary_Player]

I strapped a fatty heatsink onto my 486 dx4 100mhz and clocked that bad boy up to 150 mhz. Couldnt tell you the temps because that was before the days of temp monitors ;)

had to up the voltage via JUMPERS (how quaint) to get it to work though...

[Samoa]

jesus man... is that a barton core?

I'm running that processer and have to stop at 2.2ghz or things get ugly

What sort of cooling are you using - im just using starndard sink/fan pack

It is indeed. Unlocked. I have a Vantec Aeroflow VA-C7040, and two case fans, one in the rear and one in the center blowing on the chipset/ddr/video card/cpu. It does pretty damn good. I don't have good airflow now, this NF7 puts things too close to the HD...but all is good. :D

Coach Potato, you can OC that 2600 with the right mobo and DDR. (Y)

*I've had my Vantec Aeroflow for over a year with no problems related to the fan, btw. :happy: