About AutoPatcher November 2006...  

178 members have voted

  1. 1. Pick what releases you want for November!

    • Full, Lite, Update, QMUP
      30
    • Full, Lite, Update
      40
    • Full, Lite, QMUP
      11
    • Full, Lite
      36
    • Full, QMUP
      36
    • Update, QMUP
      6
    • Update
      19


Recommended Posts

Lyndon will be away for a couple of weeks, so the November 2006 (English) releases with done by me :) Of course, I haven't packaged a release for quite some time now, so bare with me...

I'll try to do releases for all three versions (2000, xp, 2003), but I'm not sure if I'll have enough time to do *all types* (Full, Lite, Update, QMUP) too.

So, what releases should I do for November?

My pick would be "Full, Lite, QMUP" or "Full, QMUP".

Thoughts about Lite:

It seems that the Lite releases lately are not very Lite at all. I mean, they are about 70-80% of the Full release's size. This is of course a sign that most of the size is used by critical/recommended patches.

Other thoughts:

And because I don't have a blog right now... more thought of mine, flying out the window...

Back in the days of XP SP1 releases, I remember that SP2 came out when AutoPatcher Full was near 250-300mb. With Microsoft not releasing SP3 for Windows XP for a year to come, I'm afraid that AutoPatcher releases will keep getting bigger and bigger. :(

Link to comment
https://www.neowin.net/forum/topic/505612-about-autopatcher-november-2006/
Share on other sites

Voted Full, QMUP mainly as I prefer the full updates, and agree with you on the size, theyre practically the same so makes no difference when downloading with either broadband or dialup.

Thanks for all your hard work on the autopatcher app. (Y)

Hi,

A lot would depend on what you will be including in AP for November.

Are there plans to include IE7?

If so will AP be based on using IE7 by default or will it be optional?

From what I see MS would rather folks upgraded to IE7 given they will be pushing it out via AU in the next few months.

If you will be including IE7 as non-optional then many of the current hotfixes for IE6 become redundant.

However I could see that many folks would not wish to be forced to install or use IE7.

If you will be including IE7 as optional then you will need to cater for both IE6 and IE7 users which will eventually diverge the project into almost 2 seperate packages.

Given these changes it might make more sense to release AP November as a Full and QMUP.

Kind Regards

Simon

PsiMoon314, about IE7:

As far as I know, there are certain things that stopped working in IE7. Thus, it's an update that some may not want. Thus optional. And only included in Full (due to size).

As you said, Microsoft will be pushing it via AU *in the next few months*. Maybe they'll have fixed some things until then.

Also, remember that we don't only need silent, but also offline installation. IE7 as far as I know includes validation. Any updates on that?

Hi,

A lot would depend on what you will be including in AP for November.

Are there plans to include IE7?

If so will AP be based on using IE7 by default or will it be optional?

From what I see MS would rather folks upgraded to IE7 given they will be pushing it out via AU in the next few months.

If you will be including IE7 as non-optional then many of the current hotfixes for IE6 become redundant.

However I could see that many folks would not wish to be forced to install or use IE7.

If you will be including IE7 as optional then you will need to cater for both IE6 and IE7 users which will eventually diverge the project into almost 2 seperate packages.

Given these changes it might make more sense to release AP November as a Full and QMUP.

Kind Regards

Simon

WMP10 is a Component, so WIE7 (and also WMP11) should be a Component also. About including both MIE6 stuff and WIE7, i don't think that's a good idea... Also, if WIE7 and WMP11 will be included, then Full - else Update...

P. S. WIE7 setup downloads some "Windows Internet Explorer required updates". But if you're not online at the time, it skips them. Maybe these are MIE6 KBs? So maybe you do have to have both MIE6 KBs AND WIE7 if you want no going online whatsoever (except the validation, of course) and still a regular install?

Edited by xyz123

major problem: my main pc's main hdd is in big trouble. and (as it always happens) its the disk i did not backup.

i'll try to recover as much of it as i can, but i really can't promise anything. right now i'm left with my laptop. in any case... gandolas, nevermind the lite. we'll do full and qmup. i'll do the qmup for sure, but i'm not sure about the full.

/antonis

I know this is a bit off topic but what about making iso releases every few months for techs and such who would benefit from it. Also, I don't about many others but I like having a hard copy on hand as hard drive failures can come at any time.

Like for people that manage many pcs with different os make the iso include Win2k and XP or something like that.

just my 2 coppers worth:

why dont we start having a regular schedule for full releases (Jan, Apr, July, Oct), with updates between. then if it is posted clearly and prominently, there will be fewer questions as to which is coming out.

Also, i vote update and QMUP

McG

Lyndon will be away for a couple of weeks, so the November 2006 (English) releases with done by me :) Of course, I haven't packaged a release for quite some time now, so bare with me...

I'll try to do releases for all three versions (2000, xp, 2003), but I'm not sure if I'll have enough time to do *all types* (Full, Lite, Update, QMUP) too.

So, what releases should I do for November?

My pick would be "Full, Lite, QMUP" or "Full, QMUP".

Thoughts about Lite:

It seems that the Lite releases lately are not very Lite at all. I mean, they are about 70-80% of the Full release's size. This is of course a sign that most of the size is used by critical/recommended patches.

Other thoughts:

And because I don't have a blog right now... more thought of mine, flying out the window...

Back in the days of XP SP1 releases, I remember that SP2 came out when AutoPatcher Full was near 250-300mb. With Microsoft not releasing SP3 for Windows XP for a year to come, I'm afraid that AutoPatcher releases will keep getting bigger and bigger. :(

hello

it seems YoU are the one i was looking for

"και εισαι και Ελληνας!!"

I m Panosmon from Monemvasia Greece

By the time i installed the last AutoPatcher in my pc

all my autodesk progs (Autocad 2000-Land 2005) exept the Autocad 2006 failed to open

I fact they all give the same error:autoCad Error Aborting

All of the possible directories for storing temporary files either do not exist or are readonly

I need HELPPPP!!!

  • 3 weeks later...

Greetings....

My understanding is that the Lords of MS have determined IE 7 to be in the category of critical security updates, however, to minimize the support load, they have decided to spoon feed distribution to the masses via Microsoft Update on a limited scale.

My opinion (free and you get what you pay for) is that this technically makes IE7 a go for inclusion with autopatcher XP if the intent is to help people maintain patched and secure systems.

On the flip side.... I've already run into a situation with a university using collaborative / white board software plug ins that have crashed gloriously after IE7 is installed. So yes.... there are some compatibility issues with 3rd party stuff.....

It boils down to whether the need is to keep autopatcher as a tool to keep current with the latest thinking at microsoft or to allow people who use autopatcher a chance to test for compatibilty issues.... how long will that take vs how soon do folks want a more secure / feature packed browser.....

Life is full of trade offs.... just ask my ex.....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I like the show more options. The only problem with it is that it's not always in a consistent spot in the menu. If the copy/paste/cut, happens to show on top, then more option is the last in the menu. But if copy/paste/cut happens to show on the bottom, then more options is before the copy/paste/cut. But I do like the more options because it hides the stuff that I rarely use. But I would like to choose what it is or isn't hiding. That would make it better.
    • I wonder if "put it back the way it was for decades" ever crossed their minds? 🤣
    • Rescind the stupid "Show more options" in context menus and just give us the full menu instead of adding more steps to get to what we want. The "simpler by default" makes me think they'll go in the opposite direction. Every context menu should have a configure button so you can pick and choose what options should be shown, I know you can do that with some registry fu but that shouldn't be required.
    • This is why competition must exist. Finally, pressure is mounting on Microsoft to move in the right direction.
    • Microsoft is making Windows 11's context menus faster, simpler, and configurable by Taras Buria Five years ago, Windows 11 introduced redesigned context menus, offering users a simpler, more modern design. However, customers quickly discovered that the new menus leave a lot to be desired. Many are unhappy with performance (they are really slow), while others dislike the double-layed design, where many options are hidden behind the "Show more options" button. In addition, over the years, menus became cluttered and overloaded. While Microsoft has already fixed plenty of pain points across Windows 11, context menus remain mostly unchanged. Fortunately, Microsoft is finally listening. Marcus Ash, Design and Research Lead for Windows at Microsoft, responded to a tweet on X, confirming that the company is working on fixing Windows 11's context menus. Reworked context menus are supposed to be faster, simpler by default, and "configurable to what you use most." What the latter means is unknown, just like whether Microsoft plans to keep the classic menu alongside the modern one, but according to Marcus, the wait should finally be over soon, as he promised to "share our approach soon." Improved context menus will most likely appear first in Windows 11 preview builds in the Experimental Channel. While we wait for Microsoft to release them, you can try fixing context menus on your PC with a simple tool called Windows 11 Context Menu Manager. It lets you disable entries you do not need, not only cleaning up context menus, but also making them significantly faster. Microsoft has already improved Windows 11's Start menu and taskbar, so hopefully it will address user criticism of the context menu as well. Stay tuned for new Windows 11 preview builds, which usually arrive every Friday.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • One Month Later
      Carru_123 earned a badge
      One Month Later
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      PsYcHoKiLLa
      249
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      65
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!