About AutoPatcher November 2006...  

178 members have voted

  1. 1. Pick what releases you want for November!

    • Full, Lite, Update, QMUP
      30
    • Full, Lite, Update
      40
    • Full, Lite, QMUP
      11
    • Full, Lite
      36
    • Full, QMUP
      36
    • Update, QMUP
      6
    • Update
      19


Recommended Posts

Lyndon will be away for a couple of weeks, so the November 2006 (English) releases with done by me :) Of course, I haven't packaged a release for quite some time now, so bare with me...

I'll try to do releases for all three versions (2000, xp, 2003), but I'm not sure if I'll have enough time to do *all types* (Full, Lite, Update, QMUP) too.

So, what releases should I do for November?

My pick would be "Full, Lite, QMUP" or "Full, QMUP".

Thoughts about Lite:

It seems that the Lite releases lately are not very Lite at all. I mean, they are about 70-80% of the Full release's size. This is of course a sign that most of the size is used by critical/recommended patches.

Other thoughts:

And because I don't have a blog right now... more thought of mine, flying out the window...

Back in the days of XP SP1 releases, I remember that SP2 came out when AutoPatcher Full was near 250-300mb. With Microsoft not releasing SP3 for Windows XP for a year to come, I'm afraid that AutoPatcher releases will keep getting bigger and bigger. :(

Link to comment
https://www.neowin.net/forum/topic/505612-about-autopatcher-november-2006/
Share on other sites

Voted Full, QMUP mainly as I prefer the full updates, and agree with you on the size, theyre practically the same so makes no difference when downloading with either broadband or dialup.

Thanks for all your hard work on the autopatcher app. (Y)

Hi,

A lot would depend on what you will be including in AP for November.

Are there plans to include IE7?

If so will AP be based on using IE7 by default or will it be optional?

From what I see MS would rather folks upgraded to IE7 given they will be pushing it out via AU in the next few months.

If you will be including IE7 as non-optional then many of the current hotfixes for IE6 become redundant.

However I could see that many folks would not wish to be forced to install or use IE7.

If you will be including IE7 as optional then you will need to cater for both IE6 and IE7 users which will eventually diverge the project into almost 2 seperate packages.

Given these changes it might make more sense to release AP November as a Full and QMUP.

Kind Regards

Simon

PsiMoon314, about IE7:

As far as I know, there are certain things that stopped working in IE7. Thus, it's an update that some may not want. Thus optional. And only included in Full (due to size).

As you said, Microsoft will be pushing it via AU *in the next few months*. Maybe they'll have fixed some things until then.

Also, remember that we don't only need silent, but also offline installation. IE7 as far as I know includes validation. Any updates on that?

Hi,

A lot would depend on what you will be including in AP for November.

Are there plans to include IE7?

If so will AP be based on using IE7 by default or will it be optional?

From what I see MS would rather folks upgraded to IE7 given they will be pushing it out via AU in the next few months.

If you will be including IE7 as non-optional then many of the current hotfixes for IE6 become redundant.

However I could see that many folks would not wish to be forced to install or use IE7.

If you will be including IE7 as optional then you will need to cater for both IE6 and IE7 users which will eventually diverge the project into almost 2 seperate packages.

Given these changes it might make more sense to release AP November as a Full and QMUP.

Kind Regards

Simon

WMP10 is a Component, so WIE7 (and also WMP11) should be a Component also. About including both MIE6 stuff and WIE7, i don't think that's a good idea... Also, if WIE7 and WMP11 will be included, then Full - else Update...

P. S. WIE7 setup downloads some "Windows Internet Explorer required updates". But if you're not online at the time, it skips them. Maybe these are MIE6 KBs? So maybe you do have to have both MIE6 KBs AND WIE7 if you want no going online whatsoever (except the validation, of course) and still a regular install?

Edited by xyz123

major problem: my main pc's main hdd is in big trouble. and (as it always happens) its the disk i did not backup.

i'll try to recover as much of it as i can, but i really can't promise anything. right now i'm left with my laptop. in any case... gandolas, nevermind the lite. we'll do full and qmup. i'll do the qmup for sure, but i'm not sure about the full.

/antonis

I know this is a bit off topic but what about making iso releases every few months for techs and such who would benefit from it. Also, I don't about many others but I like having a hard copy on hand as hard drive failures can come at any time.

Like for people that manage many pcs with different os make the iso include Win2k and XP or something like that.

just my 2 coppers worth:

why dont we start having a regular schedule for full releases (Jan, Apr, July, Oct), with updates between. then if it is posted clearly and prominently, there will be fewer questions as to which is coming out.

Also, i vote update and QMUP

McG

Lyndon will be away for a couple of weeks, so the November 2006 (English) releases with done by me :) Of course, I haven't packaged a release for quite some time now, so bare with me...

I'll try to do releases for all three versions (2000, xp, 2003), but I'm not sure if I'll have enough time to do *all types* (Full, Lite, Update, QMUP) too.

So, what releases should I do for November?

My pick would be "Full, Lite, QMUP" or "Full, QMUP".

Thoughts about Lite:

It seems that the Lite releases lately are not very Lite at all. I mean, they are about 70-80% of the Full release's size. This is of course a sign that most of the size is used by critical/recommended patches.

Other thoughts:

And because I don't have a blog right now... more thought of mine, flying out the window...

Back in the days of XP SP1 releases, I remember that SP2 came out when AutoPatcher Full was near 250-300mb. With Microsoft not releasing SP3 for Windows XP for a year to come, I'm afraid that AutoPatcher releases will keep getting bigger and bigger. :(

hello

it seems YoU are the one i was looking for

"και εισαι και Ελληνας!!"

I m Panosmon from Monemvasia Greece

By the time i installed the last AutoPatcher in my pc

all my autodesk progs (Autocad 2000-Land 2005) exept the Autocad 2006 failed to open

I fact they all give the same error:autoCad Error Aborting

All of the possible directories for storing temporary files either do not exist or are readonly

I need HELPPPP!!!

  • 3 weeks later...

Greetings....

My understanding is that the Lords of MS have determined IE 7 to be in the category of critical security updates, however, to minimize the support load, they have decided to spoon feed distribution to the masses via Microsoft Update on a limited scale.

My opinion (free and you get what you pay for) is that this technically makes IE7 a go for inclusion with autopatcher XP if the intent is to help people maintain patched and secure systems.

On the flip side.... I've already run into a situation with a university using collaborative / white board software plug ins that have crashed gloriously after IE7 is installed. So yes.... there are some compatibility issues with 3rd party stuff.....

It boils down to whether the need is to keep autopatcher as a tool to keep current with the latest thinking at microsoft or to allow people who use autopatcher a chance to test for compatibilty issues.... how long will that take vs how soon do folks want a more secure / feature packed browser.....

Life is full of trade offs.... just ask my ex.....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google are hyprocrites for signing this. They have been pulling the same dirty tactics as Microsoft, only they do it on Android and ChromeOS.
    • In some countries the law has forced Microsoft to display a menu on a fresh install of Windows which asks which web browser you want and it will install that browser. This doesn't add any bloat to Windows. It simply an additional step when setting up a new PC.
    • Chrome is also a first party browser on Android and ChromeOS. And on those systems, Google is pulling the same dirty tactics as Microsoft does on Windows.
    • Unofficial script lets you install unreleased Windows 11 features without Microsoft Account by Sayan Sen Microsoft has been steadily evolving the Windows Insider Program over the years, introducing new channels and testing paths that allow enthusiasts to experience upcoming and yet-to-be-released Windows features (some interesting hidden ones too) before they reach the public. However, one long-standing requirement has remained largely unchanged as users are generally expected to enroll in the Program and with a Microsoft account. That's where a third-party tool called "OfflineInsiderEnroll" can help. OfflineInsiderEnroll is said to be a lightweight script that enables access to Windows Insider Program builds on systems that are not signed in with a Microsoft account. Essentially the tool configures the necessary Insider settings locally and hence allows users to select and switch between available preview channels while continuing to receive builds through the normal Windows Update channel. If you are wondering how it manages to do so, it is made possible by a Registry value known as TestFlags. When configured to"0x20", Windows stops communicating with Microsoft's online Insider enrollment services thus preventing locally configured Insider settings from being overwritten. This allows the script to apply its own channel configuration directly through the Registry as Windows Update does not verify whether a device has been officially enrolled in the Insider Program or not. Previously the utility has had already supported the traditional Insider branches including Dev, Beta, and Release Preview. However following Microsoft’s recent restructuring of its preview channels, the script has now been updated. The latest OfflineInsiderEnroll version, 2.6.6, adds support for the newly introduced Insider channel lineup. As such, users can now choose from several Experimental channels in addition to Beta and Release Preview options. The update also retains tools for refreshing the Insider cache, resetting Insider settings, and completely stopping Insider enrollment when needed. Keep in mind though that will need elevated privileges when running the script (run as Admin). You can get the latest version of OfflineInsiderEnroll from this page on its official GitHub repo.
    • The "Classic" Outlook has done that for a few years as well. The option to even change that is really hidden away too... It really shouldn't be hard to respect user defaults. Sadly we are the product now, not Outlook. To change in the Classic Outlook: File > Options > Advanced > change "Open hyperlinks from Outlook in"
  • Recent Achievements

    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
    • Collaborator
      Asgardi earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      67
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!