Mother Microwaves Baby to Death

By LOC
in Real World News

 Share

Recommended Posts

Grand Master

LOC Veteran

Posted
  • Veteran
Posted

Sigh, what this world is coming to. Absolutely disgusting. Personally if she's found guilty I think they should put her in a microwave.

But remember, she's only under the "suspicion" of doing this.

DAYTON, Ohio (AP) -- A mother was arrested on suspicion of murdering her newborn daughter by microwaving the baby in an oven.

China Arnold, 26, was jailed Monday on a charge of aggravated murder, more than a year after she brought her dead month-old baby to a hospital. Bail was set Tuesday at $1 million.

"We have reason to believe, and we have some forensic evidence that is consistent with our belief, that a microwave oven was used in this death," said Ken Betz, director of the Montgomery County coroner's office.

He said the evidence included high-heat internal injuries and the absence of external burn marks on the baby, Paris Talley.

Arnold was arrested soon after the baby's death in August 2005, then was released while authorities investigated further. Betz said the case was difficult because "there is not a lot of scientific research and data on the effect of microwaves on human beings."

The death was ruled a homicide caused by hyperthermia, or high body temperature. The absence of external burns ruled out an open flame, scalding water or a heating pad as the cause, Betz said.

Arnold's lawyer, Jon Paul Rion, said his client had nothing to do with her child's death and was stunned when investigators told her that a microwave might have been involved. (Watch the mother's lawyer insist she's innocent )

"China -- as a mother and a person -- was horrified that such an act could occur," Rion said.

The night before the baby was taken to the hospital, Arnold and the child's father went out for a short time and left Paris with a baby sitter, Rion said. The mother didn't sense anything out of the ordinary until the next morning, when the child was found unconscious, Rion said.

Arnold has three other children.

In 2000, a Virginia woman was sentenced to five years in prison for killing her month-old son in a microwave oven. Elizabeth Renee Otte claimed she had no memory of cramming her son in the microwave and turning on the appliance in 1999.

Experts said that Otte suffered from epilepsy and that her seizures were followed by blackouts.

CNN

Link to comment
https://www.neowin.net/forum/topic/516835-mother-microwaves-baby-to-death/
Share on other sites
Grand Master

Brodel

Posted
Posted

Maybe I misunderstand the way bail works, but does that mean if she was rich enough to afford it she could just pay her bail and walk out? If so, how the hell can they justify any kind of bail option for that kind of crime.

Grand Master

LOC Veteran

Posted
  • Author
  • Veteran
Posted

You don't know if she did yet.

Innocent until proven guilty anyone?

I know this, and I said in my post she's only suspected of doing it. But that doesn't stop people (and you know this as much as I do) from condemning her instantly regardless.

Maybe I misunderstand the way bail works, but does that mean if she was rich enough to afford it she could just pay her bail and walk out? If so, how the hell can they justify any kind of bail option for that kind of crime.

Yep that's how it works. In these sorts of cases, ie: high profile murders or something the bail is usually set pretty high though. $1 Million for the average person is a tad high to just "walk out" though, normally.

Proficient

Lurchybaby

Posted
Posted

In theory, innocent until proven guilty is how it's supposed to be. However, speaking from experience, more often than not, you're guilty until proven innocent. There was an "incident" that occured that I fell under the umbrella of suspicion for. I had to PROVE my INNOCENCE to be cleared, and not have the accuser PROVE my GUILT.

Welcome to a screwed up legal system.......

Grand Master

whitebread

Posted
Posted
The night before the baby was taken to the hospital, Arnold and the child's father went out for a short time and left Paris with a baby sitter, Rion said. The mother didn't sense anything out of the ordinary until the next morning, when the child was found unconscious, Rion said.

I wonder what made them not suspect the babysitter. After all, if she assumed the baby was asleep when she got home, and didn't realize the problem until later.... Why couldn't the babysitter have done it?

Grand Master

AltecXP

Posted
Posted

As sick as this is, nothing seems to surprise me anymore. Even more so seeing as it's in the States.

If you think the States are disturbing I'm guessing you forgot where the "dark ages" were located and what went on there.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Game I've been Working On

      By Circaflex · Posted

      This looks awesome, I will request access via Steam later this afternoon!
    • How do you future-proof a home or small office network?

      By Circaflex · Posted

      Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • How do you future-proof a home or small office network?

      By Nick H. · Posted

      I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • Celebrating Windows XP's 25th anniversary this year

      By Nick H. · Posted

      I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2

      By Copernic · Posted

      Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!