Digital Camera Help

By Mkvos
in Digital Camera Lab

 Share

Recommended Posts

Apprentice

Mkvos

Posted
Posted

Hey people. I was wondering if anybody would help me with a couple of questions.

First: Do you know where and if I can find a digital camera that will instantly upload pictures to a computer after they've been taken. Somewhat similar to how the webcams do it, but I'm looking for a digicam that'll do that instead.

Second: Does anyone know where and if I can find a digital camera that will still take pictures while it's connected to a PictBridge device rather than having to disconnect the camera from the printer everytime i want to take another picture. Do you get it? :huh: I want this camera to take a picture and instantly print it without having to disconnect any cables.

If there's anything else i need to know, such as printers and special hardware I'd need for this, please let me know.

Thanks very much

Mkvos.

Link to comment
https://www.neowin.net/forum/topic/518574-digital-camera-help/
Share on other sites
Grand Master

Pink Floyd Veteran

Posted
  • Veteran
Posted
First: Do you know where and if I can find a digital camera that will instantly upload pictures to a computer after they've been taken. Somewhat similar to how the webcams do it, but I'm looking for a digicam that'll do that instead.
DSLR cameras can do it with a specific software from the vendor. For exemple, Nikon has a software named Camera control that allow you to change picture curve and also being able to directly upload the picture into your computer to make it ready for picture editing. You can buy it because this is not sold with the camera since this is more used by pro shooters. Canon has probably the equivalence for sure.
Second: Does anyone know where and if I can find a digital camera that will still take pictures while it's connected to a PictBridge device rather than having to disconnect the camera from the printer everytime i want to take another picture. Do you get it? :huh: I want this camera to take a picture and instantly print it without having to disconnect any cables.
Probably possible but I have no clue
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Windows Server gets DNS over HTTPS (DoH) support

      By Legend20 · Posted

      Microsoft is busy. Lots of changes to be released imminently for Windows server or soon. Also, lots happening for next version as well. Third party virus scanning software is being moved out of Kernel mode to avoid repeat of Crowdstrike incident. Windows Protected Mode and Windows Ready Print no longer require third party print drivers to be installed. New storage stack being developed. New NVME drivers now available for Windows Server 2025 to improve local NVME drive performance by 60+ percent. NVME-Of of fabric being worked on for next release to improve network access to NVME drives. ReFs (next file system) now has ability to boot and will become default file system in next release of Windows Server. ReFs improves on NTFS in several areas including resiliency and reliability and scalability. New update stack is being worked on to unify Windows updates, and updates for drivers and first party/3rd party application software. A stricter and more robust third-party driver certification program (ODI) is being worked on to improve performance, thermals, battery life, and reliability on modern Windows hardware by tightening how OEMs and IHVs (Intel, AMD, Qualcomm, NVIDIA, etc.) build and ship drivers. There is a tone more but too numerous to mention.
    • Windows 11 gets better widgets, new Screen Tint feature, and more in the latest build

      By ZipZapRap · Posted

      Now disable that stupid OneDrive backup request when Windows starts please. So unbelievably frustrating to only have “remind me later” instead of “no and never ask me again”
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates

      By goretsky · Posted

      Hello, The Media Creation Tool is still at v10.0.26100.7019 from October 2025. Just looks like the backend has been updated. Regards, Aryeh Goretsky
    • Microsoft releases major feature updates for stock Windows 11 apps

      By skinnyJM · Posted

      Since they open sourced the calculator in Win 10/11 it is much better and can do a lot, I love it.
    • Using Windows 10 past its end of support date, is it really that bad?

      By +Edouard · Posted

      That's just silly imo. The lengths that man goes to just to avoid W11 is just nuts. Very, very few home users would do that. I will say this though, he is committed. Btw, I note on askwoody that Woody Leonhard passed away March, 2025 aged 73. His site was one of my favorites back in the day. Belated yes but RIP Woody.

  • Recent Achievements

    • One Month Later
      Markus94287 earned a badge
      One Month Later
    • Week One Done
      Markus94287 earned a badge
      Week One Done
    • One Year In
      Markus94287 earned a badge
      One Year In
    • Dedicated
      truespursfan earned a badge
      Dedicated
    • Rookie
      restore went up a rank
      Rookie

  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!