Speakers crackling with power changes


Recommended Posts

Hi,

I just purchased this speakers set: Logitech X-530 5.1 Speakers, and connected it to my PC fine (X-Fi XtremeMusic).

It works beautifully, but the only problem I have that drives me insane is the occasional crackling "bombs", it happens clearly every time someone turns a light on/off in the house, or even the TV or washer machine, and also it happens occasionally but lighter.

The problems keep happening even if I shutdown the PC and disconnected all audio cables from sound card, so I think it's pretty power related. I've connected the speakers to a voltage regulator unit but it didn't help at all. The strange thing is that my previous cheap no-name speakers didn't have that problem.

What do you think? a surge protector can help? noise filter? new house? :D Can you share your experience?

Thank you :)

My place, my digital set top box, tv etc is affected by light switches as well. Funnily enough, my big amp and speakers are not so much. Kinda just goes quiet a second or two when a light switch is turned on or off.

My father was a electrician and he stated that its the wiring in the apartment and some electrical equipment is more susceptable then others.

My computer in computer room has a UPS (universal power supply) which is great for brownouts(small surges or dropouts) and blackouts.

Since these regulate the power and also have surge protection, and battery backup, might be something you are after.

I cannot guarantee that it will work for you, but i have lil drop outs and my UPS quickly kicks in and protects my modem, and computers, monitors and speakers and have no issues with crackling in the computer room.

I guess you could pick one up and test it, and if you do, make sure the place you buy it has a great return policy.

Sorry i havent been able to help further but just telling you my experiences with my gear.

Jasur, I appreciate your informative reply.

I already have a UPS, but it can't take my speakers plug, like this:

post-49195-1169893489.jpg

It only takes those three pins computer plugs, like this:

post-49195-1169893495.jpg

Do you think there's a converter to allow me to connect the speakers to it? that would be worth the try I think! I searched locally before but couldn't find it (didn't check RadioShack yet though).

To add, I have tried connecting the speakers to every power socket in the house, and all produce the same effect when turning light off/on.

Thanks.

I have the 2.1 model of those speakers, it does the same thing when the Air-Conditioner or Washing Machine is on.

Also my Pioneer Amplifier does as described above, has a short cut-out (that is just the great power protection inside most amplifiers)

It is just basically us being electricity ######, a controlled UPS would probably fix your problem (as described above)

BTW I am new here, so Hi everyone.

Welcome HybridShadow, It's an honor to have your first post in my thread, you'll enjoy Neowin SO MUCH :)

tiagosilva29, thanks for your feedback, me too guess it can be done manually, but I don't want to take the risk of damaging the speakers/UPS if I did it wrong, also can't find any tutorial for that.

Waiting someone with the magical solution :)

Welcome HybridShadow, It's an honor to have your first post in my thread, you'll enjoy Neowin SO MUCH :)

[OFFTOPIC] Thank you, it is great to have a nice welcome, so far I am enjoying it. [/OFFTOPIC]

I had a look on eBay for noise filters, but I don't know much about them and I couldn't find anything that would of been any help.

Thanks for your research, Hybird :)

After some more research, I found this: Belkin Power Port Plus? UPS Adapter, which allows connecting any type of plugs to the standard UPS plug type. I ordered one that should arrive within few days, and this will allow me to connect the speakers to the UPS and see if the problem goes away, if not, then I didn't lose anything as I needed such an adapte(Y)Y).

Thanks for help everyone.

Jasur, I appreciate your informative reply.

I already have a UPS, but it can't take my speakers plug, like this:

post-49195-1169893489.jpg

It only takes those three pins computer plugs, like this:

post-49195-1169893495.jpg

Do you think there's a converter to allow me to connect the speakers to it? that would be worth the try I think! I searched locally before but couldn't find it (didn't check RadioShack yet though).

To add, I have tried connecting the speakers to every power socket in the house, and all produce the same effect when turning light off/on.

Thanks.

My UPS has normal power connections. The type you use to go into a wall socket.

Well, with ya purchase, i hope it does solve the ieeues you have been having.

Worst comes to worst, just disconnect the power from the fuse box :p

Let us know how it goes for you.

I really need to find one of those in my country.

Are multifunction printers, speakers and routers all suitable for a surge-only C13?

I'm aware that printers are, but I'm not sure about the rest of the devices.

I'm not sure, but I guess as stated on their website it'll take care of that:

??Ideal for Protecting: b>

Zip? Drives

Jaz? Drives

External Hard Drives

Printers

Scanners

Any Peripherals Requiring Standard Plug Power Ports

If you can't find it in Portugal, you can order it here: http://www.stuff-uk.net/?s=ST-F6C104UKPP-A, they ship internatonally.

Thanks Jasur, I'll keep you updated when it arrives (I ordered it from the site above).

You have a point here, this image shows it clearly: http://images.belkin.com/F6C104uPP/FUL1_F6C104uPP.jpg

Anyway, there's still a chance it can take it, and I already contacted their sales department and will update you when I receive a reply.

It seems it's not compatible as I received this message regarding my order:

We confirm that we have cancelled the above order. We cannot ship this item to Egypt.

We have not debited your card as requested.

Oh well :pinch:

I had this problem. The cause could vary and power line filters or a UPS won't necessarily help.

If you have a multimeter test your outlets. The monkey [electrician] who installed them may have incorrectly inversed the hot wire and neutral -- that's what I found in my residence.

Also, if you have fluorescent lighting that could be the culprit, and again a filter won't necessarily help. Specifically an older system of fluorescent lighting. They use a high voltage system to make the gas glow. With the higher voltages and weird wave shapes (not a clean sine wave), they generate a lot of harmonics at higher frequencies. Furthermore, the wires in the fluorescent lighting going from the transformer to the bulbs are acting as antennas, while your amplifier/speakers are acting a receiver and the lighting fixture as a transmitter. Everything time they get turned on or off, there is going to be a strange looking waveform, harmonics will be generated and you'll hear that annoying crackle or pop noise. The only fix for this particular problem is to upgrade the fluorescent lighting to the latest technology.

There's a slew of possibilities, those are the two I can think of off the top of my head because I had issues with both. Try to single out the cause before you start dumping money on filters or a new UPS, or least make sure you can return the item if it does not remedy the noise. And good luck, I know how annoying speaker noise can be.

Googintosh, Thanks very much for your very useful post.

I can assure you that it's my house wiring, as I know that who did them is a monkey!! What I'm trying here is to find any possible workaround. And yes, we have an old system of fluorescent lighting too.

I think I'll consult a professional to examine and suggest upgrades to the electricity system in our house.

Thanks again for your help.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think there will be a 27H1 for actual users of 26H1 The 25h2 supports ARM too : Snapdragon X, Snapdragon X Plus and Snapdragon X Elite
    • Poll: Grand Theft Auto VI price predictions, cast your vote by Pulasthi Ariyasinghe After years of waiting, Rockstar will be solidifying the launch date of Grand Theft Auto VI with the launch of pre-orders next week. While the studio has confirmed a date for this occasion, it is yet to attach a price to the highly anticipated game. So let's see what our readers think it will cost at launch. The Grand Theft Auto VI pre-orders will kick off on June 25 for digital and physical editions. Unless some last-minute changes happen, the release date will be November 19, 2026, across Xbox Series X|S and PlayStation 5. Unfortunately, there's still no information about a PC version from the developer or the publisher Take-Two. Now the question becomes, how much will Grand Theft Auto VI cost at launch? The game is predicted by some analysts to be the biggest launch of an entertainment product ever. With the amount of hype that has been built behind it and with ballooning development costs, Take-Two may price this Grand Theft Auto entry differently from other AAA titles. The current price of a AAA game is $69.99. That norm almost rose to $79.99 before calming down. But with such a massive release, Grand Theft Auto VI may be the game that pushes the boundary again. It's also possible that Take-Two keeps the price relatively low to increase the number of players that jump in early and keep them hooked on Grand Theft Auto Online to spend on microtransactions for years to come. Keep in mind that the below poll is asking for a prediction of the standard edition price, not a deluxe or any other special edition that Take-Two will introduce for additional benefits. Also, there is the chance of the company splitting up the campaign and online portions. If you think that will happen, put your vote on what you think will be the total cost of the two. Poll Poll: How much will Grand Theft Auto VI cost? $59.99 $69.99 $79.99 $89.99 $100 or more Submit Vote If you have a very specific prediction in mind, sound off in the comments below.
    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      82
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!