PSP Firmwares 2.81 - 3.03 now downgradeable


Recommended Posts

from pspupdates.qj.net

Fanjita may have told you guys what to do with a non-homebrew capable PSP, but now it appears that everyone can get in on the homebrew fun! The "goofy exploit" which exists in firmwares 2.00 to 3.03 was found on Friday, January 25, 2007, a date which you'd think might go down in the PSP homebrew history. But it probably won't because despite their seven-day ETA, the Noobz team has once again fortified its position at the top of the homebrew coding ladder with a 3.03 downgrader - just three days after the exploit was found!

Some call it magic, others call it an act of god, but whatever the reason for it, PSP gamers all across the world can now downgrade their consoles to the magic of homebrew-capable 1.5, and then if they wish to do so, upgrading to homebrew-capable custom firmware. All you need is a PSP running firmware 3.03 (if not then update to 3.03 using the update EBOOT found here) the downgrader files and the 1.50 EBOOT as well as an unpatched version of Grand Theft Auto: Liberty City Stories.

Unpatched versions of Liberty City Stories contain the 2.0 update, whereas patched versions contain higher updates. If your copy of LCS has an update higher than 2.0 on it, then you will have to find an unpatched UMD to proceed. There's no need to worry if you have a TA-082 PSP as the downgrader will check your motherboard and patch it if necessary. Note the downgrader will not let you proceed without patching if your motherboard requires it.

Not only has Noobz released a 3.03 downgrader but they've also managed to release a 3.03 HEN (Homebrew Enabler) for the PSP. This means that those of you who aren't too sure that you want to downgrade can still play homebrew on 3.03. This does not flash your PSP, but by running HEN, it installs a patch in your PSP's memory, that allows you to run homebrew almost as if you had a v1.5 PSP. This patch remains in place until you fully turn off your PSP - it will survive the PSP being placed into sleep mode. You run the HEN application just as you do the downgrader using Grand Theft Auto: Liberty City Stories.

To use this simply download the 3.03 HEN files from the download links below and copy them to your PSP. Then run your unpatched version of GTA:LCS and the patch will apply itself. It will be stored in RAM and will stay there until you reset your PSP. Putting the PSP in sleep mode will not remove the patch. This is based on the source for HEN 2.71 provided by Dark_Alex, so the Noobz team would like to thank him for the code and the help. Additional credits go to Booster, Team C + D for the registry kernel exploit and Mathieulh for the help provided to Dark_AleX.

PLEASE READ: This downgrader has been tested by the highly-successful Noobz team and has been proven to work, however there is a small chance that bricking could occur during the process of downgrading. QJ.Net and the Noobz team are not responsible for any damage which may happen to your PSP by this application. Can you also note before use that it is possible to brick using this downgrader if you downgrade and then update to 3.03 and then downgrade again. The advice from Fanjita right now is to only use this once. If you update to 3.03 again after using the downgrader then we suggest you leave it there to prevent your PSP from bricking.

Now we've got the boring bit over with, we can move onto the downgrade process itself. Here's QJ's "how to" for downgrading from 3.03 to 1.50:

1. Update to firmware 3.03. If already have this firmware then proceed to step 2.

2. Open the 3.03 downgrade file and copy the contents of the folder MS_ROOT to the root of your memory stick.

3. Open the 1.5 update and rename the EBOOT.PBP to UPDATE.PBP then copy it to /PSP/GAME/UPDATE/

Make sure not to overwrite PSP/GAME/UPDATE/EBOOT.PBP

4. Load Grand Theft Auto: Liberty City Stories (unpatched)

5. It should get to loading save game, clear the screen, the screen should fill with a light blue color and then reset the PSP

(If this does not happen see below)

6. Check that HEN is running by going to system settings then System Information and it should show up as system version 303 HEN

7. If it is showing up as 3.03 HEN then go to the memory stick and run the x.yz update

8. Before the downgrader does anything to your PSP it will ask for you to agree to what it is doing

If you no longer want to continue press the Right Shoulder Button (R-TRIGGER).

9. Once you have agreed to start the downgrade do not unplug the PSP

10. Once finished the PSP will ask you to press X, after pressing it will reset it self.

11. If it comes up saying that the settings are corrupt press X to continue.

12. Enjoy your new shiny 1.5 PSP.

What do you do once you have firmware 1.5? Well, you can either start downloading homebrew games from our QuickJump Downloads site and use DevHook to run your current homebrew games or use the more popular which is to upgrade to Dark_Alex's 3.03 OE-C Custom firmware. The friendly people over at our forums have even created an easy-to-follow installation guide for 3.03 OE-C if you've never used custom firmware before. This will give you all the features of 3.03 and the ability to play homebrew and PSX games too! It doesn't get much better than this. [updated Video of the downgrade process after the jump, thanks to demologik]

Download links:

Hen 303 - http://dl.qj.net/Homebrew-Enabler-%28HEN%2...12430/catid/114

Downgrader - http://dl.qj.net/Downgrader-for-v3.03-PSP-...12431/catid/114

Well, it was bound to happen, but with an exploit that was apparently patched ? lol.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • For a guy who claims to hate Farage and the ignorant, gullible, rightwing racist skinheads sponsored by Putin that his lies represent, you sure are quoting them time and time and time again, mate. Denial isn't just a river in Egypt.
    • Do you live in the U.K? Do any of the people here that are against the UK leaving the E.U, live in the U.K? If not then why are you bothered? If you do live here then it is a different thing . Brexit was a good idea, should have done it years before, it was done badly, but the idea was good. You are saying the same thing as remainers do, oh we did what Putin wanted, we listened to the lies and Farage. I hate Farage and never believed most of what he said, certainly did not believe the £350m a week for the NHS. But we did pay a lot of money to the E.U and yes some of it came back, but what is the point of paying it out for only some of it to come back? Get out of the E.U, no money to them and in theory we can use the money to do things in the country. I said in theory, but our governments are a total and complete waste of space. No matter what colour rosette they wear. You and others say it was a mistake and yet the two main parties in the U.K are not looking at rejoining the EU, I wonder why that is? I was not tricked by anyone. Makes no odds now, we are out and have been for 10 years, what we need is a decent government to run the country. All they do is shout at each other like a load of kids and seems to do nothing and make this country more into a police and nanny state. Getting more like China all the time.
    • 4TB TEAMGROUP MP44Q, 2TB T-Force G50, and 2TB WD My Passport SSDs drop to great prices by Fiza Ali Prime Day may be over, but there are still worthwhile storage deals available, including discounts on SSDs for shoppers who missed the event or are looking to upgrade their storage solution. Particularly, 2TB Western Digital My Passport, 2TB TEAMGROUP T-Force G50, and 4TB TEAMGROUP MP44Q SSD are selling at great prices with up to 23% off. The 2TB TEAMGROUP T-Force G50 is an M.2 2280 PCIe 4.0 x4 NVMe SSD with sequential read speeds of up to 5,000MB/s and sequential write speeds of up to 4,500MB/s. The drive has an endurance rating of 1,300 TBW (terabytes written) and features a DRAM-less design. The company specifies a mean time between failures (MTBF) of 3 million hours. The drive includes an "ultra-thin" graphene heat spreader that helps dissipate heat without significantly increasing the drive's thickness. It also supports S.M.A.R.T. monitoring, allowing compatible software to monitor drive health and operating status. The SSD is rated for operating temperatures from 0°C to 70°C, with a storage temperature range of -40°C to 85°C. The drive is backed by a five-year limited warranty as well. 2TB TEAMGROUP T-Force G50 SSD: $269.99 (Amazon US) The TEAMGROUP MP44Q is an M.2 2280 PCIe 4.0 x4 NVMe SSD that delivers sequential read speeds of up to 7,000MB/s and sequential write speeds of up to 5,900MB/s. It uses 3D QLC NAND flash memory to provide 4TB of storage capacity for games, applications, media files, and other data. The drive has an endurance rating of 2,000 TBW and an MTBF of 1.6 million hours. The SSD features a DRAM-less design and supports TEAMGROUP's S.M.A.R.T. monitoring software, allowing users to monitor drive health, temperature, and remaining lifespan. For thermal management, the MP44Q also includes an "ultra-thin" graphene heat spreader. It is designed to operate at temperatures between 0°C and 70°C and can be stored at temperatures ranging from -40°C to 85°C. The SSD is also backed by a five-year limited warranty. 4TB TEAMGROUP MP44Q SSD: $478.99 (Amazon US) The 2TB WD My Passport SSD connects via a USB-C port using the USB 3.2 Gen 2 interface. It delivers sequential read speeds of up to 1,050MB/s and sequential write speeds of up to 1,000MB/s through NVMe technology. In terms of security features, the drive includes password protection with 256-bit AES hardware encryption. The SSD is also designed to resist shock and vibration and is rated to withstand drops from heights of up to 6.5 feet. The recommended operating temperature range is 5°C to 35°C, while the non-operating temperature range is -20°C to 65°C. This drive is also backed by a five-year limited warranty. 2TB Western Digital My Passport SSD: $279.99 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Yeah... The root of my comment, ostensibly, is how to spin the story via the actual technical merits of the solution! * Decentralized (aka federated) solution with built-in encrypted ephemeral message transport, * Transport via Relays (intermediary servers) with no message archival, * Second configurable pathway are actual email servers (if DNS records are programmed accordingly) via IMAP protocols carriage, * "Chat-over-Email" is the design pattern adopted; it can either leverage full-blown Email Server (must use the INBOX folder) to exchange all received messages/edits/reactions (so be weary of notifications overloads) [best practice is creating a separate email acct used explicitly for federated chat purposes!] or leverage its built-in Relay Server mechanism which actually resides on-device (by default but can be configured otherwise), * By virtue of be a decentralized/federated model, all other intermediary servers who may pass-along messages (while the recipient's final relay/device is inaccessible) cannot snoop on the messages due to the encrypted nature of contents. The intermediaries may, however, analyze the metadata due to the simple fact that routing mechanisms require hints for relay destinations. Unfortunately, whomever is posting about DeltaChat across socials are misleading with "zero metadata" claims -- especially when the Relays (according to their own technical documents) mandate the addition of chat-version metadata and other decorations in order to actually transport any message. -- Based on this summary, I'd prefer if they'd better dual-path message transport (email server add-in, federated relay engine) rather than patch-on email protocols to existing federated social media frameworks. They're frankensteining something rather than extending widely-deployed technology stacks.
    • Decentralized search result anonymization...
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!