Constant HDD Thrashing in Vista is Affecting Performance


Recommended Posts

With respect, it's difficult to narrow the disk activity down generally like that. The original poster stated that the disk was thrashing while not actually doing anything in Vista. That's probably not a compatibility issue, but more a process issue. I look at my HDD (while I'm touching nothing) and after 10 minutes of churning, think to myself, "ok, something is doing something." It's just a matter of finding out what.

That's what started investigations into what is being read/written to disk, and my VSS service usage as listed above. For users like me who are comparatively new to Vista, and having large HDDs and little if no warning about the disk usage resulting of a simple program install/uninstall, it would appear to all neophytes converted to Vista that it just chews at the HDD. Fair enough, right?

I'm just saying that I've got fully 100% supported hardware and software, and can completely replicate a 20-minute "thrashing" of my HDD just by installing a program. Easily reproduced, and I've demonstrated how anyone here can do it. Not that it's a bad thing, I'm just explaining how it's happening from one point of view.

In my earlier response I pointed out that disk activity during idle time is normal for the first couple days (sometimes more, or less, depending on if you turn your computer off, power settings, etc), as Vista is performing its "moving in" tasks. Once that's completed, you'll normally only have disk activity during idle time during scheduled defrags, anti-virus scans, etc. Of course, if you move thousands of files in or out of indexed locations, it may take a short time for the indexer to catch up. But that shouldn't affect performance of your system at all.

What I was referring to was actual disk "thrashing" that negatively impacts performance of the system. There are lots of possible causes of that, but disabling system services isn't the right solution to any of them.

If running out of RAM is the cause of the hard drive "thrashing" (which I've seen on numerious machines), and consequently Vista starts using more and more page file space, then disabling services would help reduce the amount of system memory required.

I installed a recent newer revision of my chipset driver and enabled SuperFetch again. It seems to be acting properly now. No more constant chaotic hard drive thrashing that impacted performance. Though, during the time I had SuperFetch disabled I may have updated NOD32 to a newer revision, and updated my X-Fi drivers several times as well, so I'm not sure what exactly was causing SuperFetch to go haywire.

On 512MB of RAM, Vista Ultimate Aero Theme, with a few of the tweaks I've made *Tweaks in the system that anybody can do following the guides online*, I've managed to speed up vista...

I have KIS 7.0 running in the background, doing 4 scans right now, the only problem is, explorer, scanning stuff, etc...with normal programs and such is insanely slow and I have to leave the computer and let it do its thing or else it'll freeeze....and the Disk Cleanup problem I have.....which eats away my GB's, with no help from anyone it looks like a system restore for the 15th time is the only solution....

Vista wasn't meant for 512MB, but, with these changes I've made, I could only imagine if I had 1GB of RAM, how much faster everything would be...

if anyone wants, I'd be glad posting a complete guide to what I've done, if I can make this 512MB Vista Ultimate Aero machine fast, then if you have a GB of RAM there's hope for you, you just have to knwo what to do...

My internet pages load in a matter of seconds, but it took many months of system restores and studying Vista, testing out everything people say to see what works and what doesn't....

The thing is, no matter how much cpu and such experience you have it doesn't mean you know anything about what's needed to understand the OS good enough....

I know absolutely nothing about computers except RAM, but I know allot about the Vista OS....

My Vista computer makes absolutely no noise at all, even as I'm typing this, with four scanners in the background, and scanners that are always running on my comp anytime it's turned on, I have no problems at all.....

I just came erlier from playing CS on steam, no slow down at all, no freeezing up or anything...

I always here how 1GB is the minimum, but that's suggested only for experience Vista OS users...if not, I'd say about one GB more..

i found that my hdd thrashing was due to vista attempting to defrag my 3 disks and never finishing it so it was always trying. i did a manual defrag and left it for about a day. now its much better.

also, the indexing service is useless... its for the xp/2000 style indexed search. you can disable it and still have the vista style instant search (thats the searchindexer service)

Don't disable Search, Defender, or SuperFetch. SuperFetch won't cause thrashing of your disk to any significant degree.

If you just upgraded to or installed Vista very recently, give it a couple of days to settle down. During the first day or two (or more if your computer sleeps or is off when idle) Vista has a lot of "moving in" tasks it performs to optimize your system. Indexing is one of them, but there are many others like optimizing your disk, boot-up, and more. Of course, all that stuff should only happen when the computer is idle. If it's actually impacting your usage of the system, you probably have an incompatible application or driver.

Disabling Windows services isn't a very good solution, since it won't identify the real culprit. Vista certainly wasn't designed to have constant disk thrashing happening, so there's probably some external factor causing or contributing to your problem.

I've been using Vista Ultimate since RTM and to this day! it still runs the HDD like CRAZY! and the only apps we have on this system is AOL IM and Photoshop... and when I checked what was doing it in process explorer it went right back to the new search indexer... disable that and all is fine... but re-enable it and run like crazy again... even though there really isnt anything to index on the system... I dont store data files on it... just the system and program files

  • 3 months later...

Had the same problem and tried disabling indexing etc and all services not required but still constant thrashing.

Try checking your hard drive. I found about 4kb of bad sectors. Imaged the data to a slower drive and problem solved

Vista now silent.

Hope this helps.

  • 1 month later...

Superfetch is terrible IMO. Maybe it doesn't work right on my system due to bad drivers (even though I have all the latest installed), who knows. But when it's enabled my HDD starts thrashing like crazy.

When I disable it, programs still load fast, and I experience no thrashing. This is not on a new Vista installation either (it's about one month old).

AMD X2 5000+

2GB RAM

8600 GT

Superfetch is terrible IMO. Maybe it doesn't work right on my system due to bad drivers (even though I have all the latest installed), who knows. But when it's enabled my HDD starts thrashing like crazy.

When I disable it, programs still load fast, and I experience no thrashing. This is not on a new Vista installation either (it's about one month old).

AMD X2 5000+

2GB RAM

8600 GT

SuperFetch makes programs start faster on cold boot. But more importantly, it swaps pages back into memory after they've been paged to disk (when memory becomes available again).

With respect, it's difficult to narrow the disk activity down generally like that.

>snip<

I'm just saying that I've got fully 100% supported hardware and software, and can completely replicate a 20-minute "thrashing" of my HDD just by installing a program. Easily reproduced, and I've demonstrated how anyone here can do it. Not that it's a bad thing, I'm just explaining how it's happening from one point of view.

Wow... you've got 100% supported hardware and software and can replicate 'thrashing' by installing "a program"....

sounds like that "program" may be the culprit... if you subscribe to the 'LOGICAL' train of thought.

I find it odd that people believe that the operating system is at fault when things go wrong when they install a program.

No one seems to think that it could be that 'program' causing the problem.

I disable most of the lousy apps and Vista runs almost like XP.

1. Disable Search Indexer (Good idea that Microsoft ruined)

2. Disable Volume Shadow copy (System Restore) = (Acronis True Image is better)

3. Hibernation (I never Hibernate my desktop)

4. Disable Sleep Mode (Suspend to RAM + 24/7 operation + UPS)

5. Turn off Remote Differential Compression

6. Turn off Automatic Windows Defender

7. Turn off Automatic Disk Defragmentation

8. Disable User Access Control or use TweakUAC

9. Disable Microsoft Transient Multi-Monitor Manager (Annoying delay at boot)

Edited by hardgiant
I disable most of the lousy apps and Vista runs almost like XP.

1. Disable Search Indexer (Good idea that Microsoft ruined)

2. Disable Volume Shadow copy (System Restore) = (Acronis True Image is better)

3. Hibernation (I never Hibernate my desktop)

4. Disable Sleep Mode (Suspend to RAM + 24/7 operation + UPS)

5. Turn off Remote Differential Compression

6. Turn off Automatic Windows Defender

7. Turn off Automatic Disk Defragmentation

8. Disable User Access Control or use TweakUAC

9. Disable Microsoft Transient Multi-Monitor Manager (Annoying delay at boot)

Why not use XP then, you've disabledf half of vista's new features :) The only one i turn off is the disk defrag which sucks because it takes so damn long, I use auslogics and can defrag my whole 250 gb drive in a couple minutes, whereas vista's defrag will take THREE HOURS. I love the instant search and is the main thing I miss in XP, superfetch actualy has a very noticable difference to me, some apps in vista are launching way faster than in XP.

I find the multi monitor thing is something I might want to disable though because I will probably never use to monitors, how do you disable it?

This is a really long thread and you're not going to read this... but do you know what I think really speeds vista up? Leaving your computar on continuously. I think it give all the services the time to do what they want, so they don't have to run when the computer is not idle.

I don't disable any major features on the laptop, and it's only got 1GB ram. But, it runs faster then XP thanks to teh vista technology. I'm guessing, with your complaints, that you turn your computar off.

vista works with alot less than 4 GB,where you got that from is beyond me.

Brandon Live:you are correct,superfetch is a good thing to have enabled,to all those that think superfetch is bad you need to try vista and test it.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

Your name is "freak_power" for a reason I guess, haha.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

Not everyone can afford 4GB and RAID 0. 2GB works perfectly fine for those tasks, which is how my laptop runs. 1GB works fine too.

512MB works fine for normal app usage and Basic / Classic mode.

I've been running Windows Vista on 2 GB of RAM just fine, I use Photoshop CS3 intensively with very large photographs along with multiple Internet Explorer windows, Windows Live Messenger 8.5, Microsoft Word, EditPlus 2, Dreamweaver CS3, etc and Windows has never slowed down on me, I rarely restart my notebook either, usually just hibernate or sleep. I haven't had hard drive thrashing either, and the indexer works just fine.

  • 1 year later...

I have this same problem and I'm still in the process of getting rid of it. I ran SpinRight on my drive, so I know my drive is 100% ok.

I have Norton 2009 which did remove some viruses a few weeks ago. My belief is that I have some left over from these malware/viruses. Anyway, I figured out through trial and error after trying everything listed in this thread that if I created a new admin profile and logged into that profile the thrashing went away.

So I ran msconfig in the profile that is having the hdd thrashing and shut off all the startup items that I didn't want or didn't know about. After a reboot I realized, by running msconfig again and looking at the startup tab, that there were two rundll32.exe programs running at startup. They were starting dll's in my profile's appdata/local/temp directory. khFWpOHb.dll and opNhFuTm.dll. So I changed these to not start up, logged into my other admin profile and deleted these 2 files from temp. After logging back into my regular profile the noise was gone for about a minute or two. Then the files came back again and the hdd thrashing started up as soon as the files showed up.

I am now in the process of running malwarebytes, which I downloaded from malwarebytes.org. It's definitely found some stuff. I'll let you know what happens when it's done.

If the hdd thrashing doesn't go away after that I will log into my other profile again, delete those files and create empty text files with the same names. I will then make them read only and see if that works.

If that doesn't work I will call it quits and just migrate some of my pictures and stuff to the new profile and delete the bad profile.

Wish me luck. I'll write back later to tell you what happened.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!