Constant HDD Thrashing in Vista is Affecting Performance


Recommended Posts

With respect, it's difficult to narrow the disk activity down generally like that. The original poster stated that the disk was thrashing while not actually doing anything in Vista. That's probably not a compatibility issue, but more a process issue. I look at my HDD (while I'm touching nothing) and after 10 minutes of churning, think to myself, "ok, something is doing something." It's just a matter of finding out what.

That's what started investigations into what is being read/written to disk, and my VSS service usage as listed above. For users like me who are comparatively new to Vista, and having large HDDs and little if no warning about the disk usage resulting of a simple program install/uninstall, it would appear to all neophytes converted to Vista that it just chews at the HDD. Fair enough, right?

I'm just saying that I've got fully 100% supported hardware and software, and can completely replicate a 20-minute "thrashing" of my HDD just by installing a program. Easily reproduced, and I've demonstrated how anyone here can do it. Not that it's a bad thing, I'm just explaining how it's happening from one point of view.

In my earlier response I pointed out that disk activity during idle time is normal for the first couple days (sometimes more, or less, depending on if you turn your computer off, power settings, etc), as Vista is performing its "moving in" tasks. Once that's completed, you'll normally only have disk activity during idle time during scheduled defrags, anti-virus scans, etc. Of course, if you move thousands of files in or out of indexed locations, it may take a short time for the indexer to catch up. But that shouldn't affect performance of your system at all.

What I was referring to was actual disk "thrashing" that negatively impacts performance of the system. There are lots of possible causes of that, but disabling system services isn't the right solution to any of them.

If running out of RAM is the cause of the hard drive "thrashing" (which I've seen on numerious machines), and consequently Vista starts using more and more page file space, then disabling services would help reduce the amount of system memory required.

I installed a recent newer revision of my chipset driver and enabled SuperFetch again. It seems to be acting properly now. No more constant chaotic hard drive thrashing that impacted performance. Though, during the time I had SuperFetch disabled I may have updated NOD32 to a newer revision, and updated my X-Fi drivers several times as well, so I'm not sure what exactly was causing SuperFetch to go haywire.

On 512MB of RAM, Vista Ultimate Aero Theme, with a few of the tweaks I've made *Tweaks in the system that anybody can do following the guides online*, I've managed to speed up vista...

I have KIS 7.0 running in the background, doing 4 scans right now, the only problem is, explorer, scanning stuff, etc...with normal programs and such is insanely slow and I have to leave the computer and let it do its thing or else it'll freeeze....and the Disk Cleanup problem I have.....which eats away my GB's, with no help from anyone it looks like a system restore for the 15th time is the only solution....

Vista wasn't meant for 512MB, but, with these changes I've made, I could only imagine if I had 1GB of RAM, how much faster everything would be...

if anyone wants, I'd be glad posting a complete guide to what I've done, if I can make this 512MB Vista Ultimate Aero machine fast, then if you have a GB of RAM there's hope for you, you just have to knwo what to do...

My internet pages load in a matter of seconds, but it took many months of system restores and studying Vista, testing out everything people say to see what works and what doesn't....

The thing is, no matter how much cpu and such experience you have it doesn't mean you know anything about what's needed to understand the OS good enough....

I know absolutely nothing about computers except RAM, but I know allot about the Vista OS....

My Vista computer makes absolutely no noise at all, even as I'm typing this, with four scanners in the background, and scanners that are always running on my comp anytime it's turned on, I have no problems at all.....

I just came erlier from playing CS on steam, no slow down at all, no freeezing up or anything...

I always here how 1GB is the minimum, but that's suggested only for experience Vista OS users...if not, I'd say about one GB more..

i found that my hdd thrashing was due to vista attempting to defrag my 3 disks and never finishing it so it was always trying. i did a manual defrag and left it for about a day. now its much better.

also, the indexing service is useless... its for the xp/2000 style indexed search. you can disable it and still have the vista style instant search (thats the searchindexer service)

Don't disable Search, Defender, or SuperFetch. SuperFetch won't cause thrashing of your disk to any significant degree.

If you just upgraded to or installed Vista very recently, give it a couple of days to settle down. During the first day or two (or more if your computer sleeps or is off when idle) Vista has a lot of "moving in" tasks it performs to optimize your system. Indexing is one of them, but there are many others like optimizing your disk, boot-up, and more. Of course, all that stuff should only happen when the computer is idle. If it's actually impacting your usage of the system, you probably have an incompatible application or driver.

Disabling Windows services isn't a very good solution, since it won't identify the real culprit. Vista certainly wasn't designed to have constant disk thrashing happening, so there's probably some external factor causing or contributing to your problem.

I've been using Vista Ultimate since RTM and to this day! it still runs the HDD like CRAZY! and the only apps we have on this system is AOL IM and Photoshop... and when I checked what was doing it in process explorer it went right back to the new search indexer... disable that and all is fine... but re-enable it and run like crazy again... even though there really isnt anything to index on the system... I dont store data files on it... just the system and program files

  • 3 months later...

Had the same problem and tried disabling indexing etc and all services not required but still constant thrashing.

Try checking your hard drive. I found about 4kb of bad sectors. Imaged the data to a slower drive and problem solved

Vista now silent.

Hope this helps.

  • 1 month later...

Superfetch is terrible IMO. Maybe it doesn't work right on my system due to bad drivers (even though I have all the latest installed), who knows. But when it's enabled my HDD starts thrashing like crazy.

When I disable it, programs still load fast, and I experience no thrashing. This is not on a new Vista installation either (it's about one month old).

AMD X2 5000+

2GB RAM

8600 GT

Superfetch is terrible IMO. Maybe it doesn't work right on my system due to bad drivers (even though I have all the latest installed), who knows. But when it's enabled my HDD starts thrashing like crazy.

When I disable it, programs still load fast, and I experience no thrashing. This is not on a new Vista installation either (it's about one month old).

AMD X2 5000+

2GB RAM

8600 GT

SuperFetch makes programs start faster on cold boot. But more importantly, it swaps pages back into memory after they've been paged to disk (when memory becomes available again).

With respect, it's difficult to narrow the disk activity down generally like that.

>snip<

I'm just saying that I've got fully 100% supported hardware and software, and can completely replicate a 20-minute "thrashing" of my HDD just by installing a program. Easily reproduced, and I've demonstrated how anyone here can do it. Not that it's a bad thing, I'm just explaining how it's happening from one point of view.

Wow... you've got 100% supported hardware and software and can replicate 'thrashing' by installing "a program"....

sounds like that "program" may be the culprit... if you subscribe to the 'LOGICAL' train of thought.

I find it odd that people believe that the operating system is at fault when things go wrong when they install a program.

No one seems to think that it could be that 'program' causing the problem.

I disable most of the lousy apps and Vista runs almost like XP.

1. Disable Search Indexer (Good idea that Microsoft ruined)

2. Disable Volume Shadow copy (System Restore) = (Acronis True Image is better)

3. Hibernation (I never Hibernate my desktop)

4. Disable Sleep Mode (Suspend to RAM + 24/7 operation + UPS)

5. Turn off Remote Differential Compression

6. Turn off Automatic Windows Defender

7. Turn off Automatic Disk Defragmentation

8. Disable User Access Control or use TweakUAC

9. Disable Microsoft Transient Multi-Monitor Manager (Annoying delay at boot)

Edited by hardgiant
I disable most of the lousy apps and Vista runs almost like XP.

1. Disable Search Indexer (Good idea that Microsoft ruined)

2. Disable Volume Shadow copy (System Restore) = (Acronis True Image is better)

3. Hibernation (I never Hibernate my desktop)

4. Disable Sleep Mode (Suspend to RAM + 24/7 operation + UPS)

5. Turn off Remote Differential Compression

6. Turn off Automatic Windows Defender

7. Turn off Automatic Disk Defragmentation

8. Disable User Access Control or use TweakUAC

9. Disable Microsoft Transient Multi-Monitor Manager (Annoying delay at boot)

Why not use XP then, you've disabledf half of vista's new features :) The only one i turn off is the disk defrag which sucks because it takes so damn long, I use auslogics and can defrag my whole 250 gb drive in a couple minutes, whereas vista's defrag will take THREE HOURS. I love the instant search and is the main thing I miss in XP, superfetch actualy has a very noticable difference to me, some apps in vista are launching way faster than in XP.

I find the multi monitor thing is something I might want to disable though because I will probably never use to monitors, how do you disable it?

This is a really long thread and you're not going to read this... but do you know what I think really speeds vista up? Leaving your computar on continuously. I think it give all the services the time to do what they want, so they don't have to run when the computer is not idle.

I don't disable any major features on the laptop, and it's only got 1GB ram. But, it runs faster then XP thanks to teh vista technology. I'm guessing, with your complaints, that you turn your computar off.

vista works with alot less than 4 GB,where you got that from is beyond me.

Brandon Live:you are correct,superfetch is a good thing to have enabled,to all those that think superfetch is bad you need to try vista and test it.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

Your name is "freak_power" for a reason I guess, haha.

To be more precise. I would not run Vista itself with 1Gb of RAM. 2GB of RAM is ok to run Vista itself and simple apps, but then if you have opened 3 instances of Visual Studio 2005/2008 along with Word and IE or you want to play Crysis with high/very high details then 2GB wont cut it.

So I say 4GB + Raid 0 HDD is a way to go with Vista.

Not everyone can afford 4GB and RAID 0. 2GB works perfectly fine for those tasks, which is how my laptop runs. 1GB works fine too.

512MB works fine for normal app usage and Basic / Classic mode.

I've been running Windows Vista on 2 GB of RAM just fine, I use Photoshop CS3 intensively with very large photographs along with multiple Internet Explorer windows, Windows Live Messenger 8.5, Microsoft Word, EditPlus 2, Dreamweaver CS3, etc and Windows has never slowed down on me, I rarely restart my notebook either, usually just hibernate or sleep. I haven't had hard drive thrashing either, and the indexer works just fine.

  • 1 year later...

I have this same problem and I'm still in the process of getting rid of it. I ran SpinRight on my drive, so I know my drive is 100% ok.

I have Norton 2009 which did remove some viruses a few weeks ago. My belief is that I have some left over from these malware/viruses. Anyway, I figured out through trial and error after trying everything listed in this thread that if I created a new admin profile and logged into that profile the thrashing went away.

So I ran msconfig in the profile that is having the hdd thrashing and shut off all the startup items that I didn't want or didn't know about. After a reboot I realized, by running msconfig again and looking at the startup tab, that there were two rundll32.exe programs running at startup. They were starting dll's in my profile's appdata/local/temp directory. khFWpOHb.dll and opNhFuTm.dll. So I changed these to not start up, logged into my other admin profile and deleted these 2 files from temp. After logging back into my regular profile the noise was gone for about a minute or two. Then the files came back again and the hdd thrashing started up as soon as the files showed up.

I am now in the process of running malwarebytes, which I downloaded from malwarebytes.org. It's definitely found some stuff. I'll let you know what happens when it's done.

If the hdd thrashing doesn't go away after that I will log into my other profile again, delete those files and create empty text files with the same names. I will then make them read only and see if that works.

If that doesn't work I will call it quits and just migrate some of my pictures and stuff to the new profile and delete the bad profile.

Wish me luck. I'll write back later to tell you what happened.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!