Recommended Posts

nice work,

just 2 notes about mini player mode about spectrum channel

1) background columns don't match with position of the foreground columns (see screenshot)

2) the upper line background is missing, the spectrum go upper than the background pic, see the arrow pointer on the capture below :

fooavaxu0.jpg

;)

you're right, it works very well now :)

For some reason the quick search doesn't display what you've searched for. It only shows #Search Results.

Also, just a question. Did the artist images go away with this version or did I miss a setting somewhere?

post-90912-1200860134_thumb.jpg

Thanks,

Maz

I think they've been out for a bit. I can't remember anything like that from 1.03, and it's definitely not in 1.04.

If I have all my covers in one directory, labeled artist - album.jpg, how can I set my Globals to load the pictures from there and not look for folder.jpg, etc in the album dir?

Try this if you're absolutely sure you just want one source for your covers.

$setpvar(MyCoverPath,C:\wherever_your_path_is\%artist% - %album%.jpg)

amazing config! now i can say good bye to winamp!..

like in others config, i can put "cover.jpg", "%album%.jpg",etc, but in order to get the picture of the artist in the picture..what i need to do?

avaas0.th.jpg

Try putting a "artist.jpg" in your album's folder.

Hello.

Congratulation dawxxx666 for your work... Foo Ava is really good , I discovered and used it since 1.03 version.

I use the 1.04 now but I have just a little problem I never had with the previous version.

In fact, i want to remove the CD case around the cover... In the previous version there was a parameter in options menu to remove it but It seems it is not in the 1.4 version...

If you have a solution, i am very interested....

thanks

PPM at cover art -> Settings. Find following code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
 Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

and replace (in matter of fact just add comment "tags" - //) it with this code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
,,
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
//			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

Of course it won't change album art size, so... U must get used to it, or change some more code...

Edited by dyniaq

Thx again to dawxxx666 for his work and the good looking FooAva 1.04 !

I have 2 questions / problems with this new config:

- "show now playing", the scrolling in the playlist pannel is not automatic anymore

- FooAva 1.04 not compatible with iAva, right?

Is there any solution to these problems?

Thx in advance

"show now playing", the scrolling in the playlist pannel is not automatic anymore

What do U mean? It works fine with me, when i.e. song at first position in playlist is playing and I sroll down to the last one

and then click Show Now Playing fb2k highlight the first one and sroll all playlist to show highlighted song. If this feature doesn't work with Ur fb2k

the reason could be wrong version on some component, probably panelsUI as some ver. could've some bugs with Show Now Playing feature.

iAVA was only a project, maybe abandoned already, need to ask Dawid, which meant to be a light and low resources consuming version.

fooAVA 1.04 is completely different in assumption - it's a little "show off" version which doesn't give a crap about resources. It meant to be nice

and highly functional and user friendly. So... fooAVA 1.04 is NOT compatible with iAVA

Man the theme is ingenius and u are as well. It made me throw away both wmp and winamp. this is how a music player should look like.

I have one question though. I tried a little tweak up as someone wrote here and I got what I want. The only thing is i dont know is how to fix the position of the rating stars not absolutely but accordingly to how i resize it. (relative position) (like it happens with the under the cover art info when you resize your window)

keep on the good work you are doing

post-246239-1201229923_thumb.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      478
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!