Recommended Posts

nice work,

just 2 notes about mini player mode about spectrum channel

1) background columns don't match with position of the foreground columns (see screenshot)

2) the upper line background is missing, the spectrum go upper than the background pic, see the arrow pointer on the capture below :

fooavaxu0.jpg

;)

you're right, it works very well now :)

For some reason the quick search doesn't display what you've searched for. It only shows #Search Results.

Also, just a question. Did the artist images go away with this version or did I miss a setting somewhere?

post-90912-1200860134_thumb.jpg

Thanks,

Maz

I think they've been out for a bit. I can't remember anything like that from 1.03, and it's definitely not in 1.04.

If I have all my covers in one directory, labeled artist - album.jpg, how can I set my Globals to load the pictures from there and not look for folder.jpg, etc in the album dir?

Try this if you're absolutely sure you just want one source for your covers.

$setpvar(MyCoverPath,C:\wherever_your_path_is\%artist% - %album%.jpg)

amazing config! now i can say good bye to winamp!..

like in others config, i can put "cover.jpg", "%album%.jpg",etc, but in order to get the picture of the artist in the picture..what i need to do?

avaas0.th.jpg

Try putting a "artist.jpg" in your album's folder.

Hello.

Congratulation dawxxx666 for your work... Foo Ava is really good , I discovered and used it since 1.03 version.

I use the 1.04 now but I have just a little problem I never had with the previous version.

In fact, i want to remove the CD case around the cover... In the previous version there was a parameter in options menu to remove it but It seems it is not in the 1.4 version...

If you have a solution, i am very interested....

thanks

PPM at cover art -> Settings. Find following code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
 Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

and replace (in matter of fact just add comment "tags" - //) it with this code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
,,
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
//			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

Of course it won't change album art size, so... U must get used to it, or change some more code...

Edited by dyniaq

Thx again to dawxxx666 for his work and the good looking FooAva 1.04 !

I have 2 questions / problems with this new config:

- "show now playing", the scrolling in the playlist pannel is not automatic anymore

- FooAva 1.04 not compatible with iAva, right?

Is there any solution to these problems?

Thx in advance

"show now playing", the scrolling in the playlist pannel is not automatic anymore

What do U mean? It works fine with me, when i.e. song at first position in playlist is playing and I sroll down to the last one

and then click Show Now Playing fb2k highlight the first one and sroll all playlist to show highlighted song. If this feature doesn't work with Ur fb2k

the reason could be wrong version on some component, probably panelsUI as some ver. could've some bugs with Show Now Playing feature.

iAVA was only a project, maybe abandoned already, need to ask Dawid, which meant to be a light and low resources consuming version.

fooAVA 1.04 is completely different in assumption - it's a little "show off" version which doesn't give a crap about resources. It meant to be nice

and highly functional and user friendly. So... fooAVA 1.04 is NOT compatible with iAVA

Man the theme is ingenius and u are as well. It made me throw away both wmp and winamp. this is how a music player should look like.

I have one question though. I tried a little tweak up as someone wrote here and I got what I want. The only thing is i dont know is how to fix the position of the rating stars not absolutely but accordingly to how i resize it. (relative position) (like it happens with the under the cover art info when you resize your window)

keep on the good work you are doing

post-246239-1201229923_thumb.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!