Recommended Posts

nice work,

just 2 notes about mini player mode about spectrum channel

1) background columns don't match with position of the foreground columns (see screenshot)

2) the upper line background is missing, the spectrum go upper than the background pic, see the arrow pointer on the capture below :

fooavaxu0.jpg

;)

you're right, it works very well now :)

For some reason the quick search doesn't display what you've searched for. It only shows #Search Results.

Also, just a question. Did the artist images go away with this version or did I miss a setting somewhere?

post-90912-1200860134_thumb.jpg

Thanks,

Maz

I think they've been out for a bit. I can't remember anything like that from 1.03, and it's definitely not in 1.04.

If I have all my covers in one directory, labeled artist - album.jpg, how can I set my Globals to load the pictures from there and not look for folder.jpg, etc in the album dir?

Try this if you're absolutely sure you just want one source for your covers.

$setpvar(MyCoverPath,C:\wherever_your_path_is\%artist% - %album%.jpg)

amazing config! now i can say good bye to winamp!..

like in others config, i can put "cover.jpg", "%album%.jpg",etc, but in order to get the picture of the artist in the picture..what i need to do?

avaas0.th.jpg

Try putting a "artist.jpg" in your album's folder.

Hello.

Congratulation dawxxx666 for your work... Foo Ava is really good , I discovered and used it since 1.03 version.

I use the 1.04 now but I have just a little problem I never had with the previous version.

In fact, i want to remove the CD case around the cover... In the previous version there was a parameter in options menu to remove it but It seems it is not in the 1.4 version...

If you have a solution, i am very interested....

thanks

PPM at cover art -> Settings. Find following code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
 Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

and replace (in matter of fact just add comment "tags" - //) it with this code:

///////////////////////////
// PerTrack

// Cover button
$button2($eval($get(offx)+0),$eval($get(offy)+0),0,0,$eval($get(offx)+{54*$get(pct)/100}-$get(offx)),$get(cy-cd),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase600.png,nokeepaspect),
//$imageabs2($get(cx-cd),$get(cy-cd),0,0,0,0,0,0,images\fooAVA\cdcase800.png,nokeepaspect),
,,
$ifequal($getpvar(mini.panels),1,
	PVAR:SET:mini.panels:2,
		$ifequal($getpvar(mini.panels),2,
		PVAR:SET:mini.panels:3,
		PVAR:SET:mini.panels:1)),
	TOOLTIP:""
)

// Album art

$ifequal($getpvar(albumart),1,
$panel(Album,Album Art,$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$get(cx-cover),$get(cy-cover),)

			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
//			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)
,
			$imageabs2($get(cx-ombre),$get(cy-ombre),0,0,$get(cx-ombre),$get(cy-ombre),$eval($get(offx)-{15*$get(pct)/100}-1),$eval($get(offy)-{21*$get(pct)/100}),images\fooAVA\ombre-dark.png,alpha-200nokeepaspect)
//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\cdcase600.png,alpha-255nokeepaspectROTATEFLIP-6)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}+$get(cy-cd)+2),$getpvar(MyCoverPath),alpha-255nokeepaspectROTATEFLIP-6)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{496*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspectROTATEFLIP-6) 
			$imageabs2($get(cx-overlay),$get(cy-overlay),0,0,$get(cx-overlay),$get(cy-overlay),$eval($get(offx)-1),$eval($get(offy)+$get(cy-cd)+1),images\fooAVA\reverse_overlay_black.png,nokeepaspect) 

// Dark filter (show cover reflect)
$ifequal($getpvar(backgroundd),1,
			$imageabs2($ifequal($getpvar(onepanel),1,$add(%_width%,3),$eval($sub($mul(%_width%,2),7))),$add(%_height%,63),0,0,0,0,0,0,images\fooAVA\$getpvar(background),alpha-$getpvar(alpha.bgr) NOKEEPASPECT)
,)

//			$imageabs2($get(cx-cd),$get(cy-cd),0,0,$get(cx-cd),$get(cy-cd),$eval($get(offx)+0),$eval($get(offy)+0),images\fooAVA\cdcase600.png,nokeepaspect)
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{54*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),$getpvar(MyCoverPath),nokeepaspect)
//			$imageabs2($get(cx-rounds),$get(cy-rounds),0,0,$get(cx-rounds),$get(cy-rounds),$eval($get(offx)+{114*$get(pct)/100}),$eval($get(offy)+{4*$get(pct)/100}),images\fooAVA\cdcaserounds.png,alpha-155nokeepaspect) 
			$imageabs2($get(cx-cover),$get(cy-cover),0,0,$get(cx-cover),$get(cy-cover),$eval($get(offx)+{53*$get(pct)/100}),$eval($get(offy)+{8*$get(pct)/100}),images\fooAVA\reflet300.png,alpha-135nokeepaspect) 
)


// Covar art panels

Of course it won't change album art size, so... U must get used to it, or change some more code...

Edited by dyniaq

Thx again to dawxxx666 for his work and the good looking FooAva 1.04 !

I have 2 questions / problems with this new config:

- "show now playing", the scrolling in the playlist pannel is not automatic anymore

- FooAva 1.04 not compatible with iAva, right?

Is there any solution to these problems?

Thx in advance

"show now playing", the scrolling in the playlist pannel is not automatic anymore

What do U mean? It works fine with me, when i.e. song at first position in playlist is playing and I sroll down to the last one

and then click Show Now Playing fb2k highlight the first one and sroll all playlist to show highlighted song. If this feature doesn't work with Ur fb2k

the reason could be wrong version on some component, probably panelsUI as some ver. could've some bugs with Show Now Playing feature.

iAVA was only a project, maybe abandoned already, need to ask Dawid, which meant to be a light and low resources consuming version.

fooAVA 1.04 is completely different in assumption - it's a little "show off" version which doesn't give a crap about resources. It meant to be nice

and highly functional and user friendly. So... fooAVA 1.04 is NOT compatible with iAVA

Man the theme is ingenius and u are as well. It made me throw away both wmp and winamp. this is how a music player should look like.

I have one question though. I tried a little tweak up as someone wrote here and I got what I want. The only thing is i dont know is how to fix the position of the rating stars not absolutely but accordingly to how i resize it. (relative position) (like it happens with the under the cover art info when you resize your window)

keep on the good work you are doing

post-246239-1201229923_thumb.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!