NeoSmart Technologies' ToolTipFixer 1.0.0


Recommended Posts

Press Start | Programs; and right-click on "Accessories," then press "Open." Close the window that opens up, then go to your taskbar (next to the system clock) and hover over an icon, what do you see?

If you're using anything from Windows 95 to Windows XP, chances are, you're just about to experience The Wow - a 14-year-old bug that Microsoft finally admitted to in 2006:

Before.png

Microsoft's advice? Reboot your PC.

NeoSmart Technologies' ToolTipFixer 1.0.0 is a patch to address this issue that Microsoft refuses to fix: just run the (free, small) patch once, and you're set. If you want your messed up tooltips back, just uninstall it and no harm done!

Not tested on Windows Vista

After.png

linkicon.gif Link: Windows XP's ToolTip Bug.. Fixed!

softicon.gif Download: Download ToolTipFixer 1.0.0 (88kb)

souricon.gif News source: NeoSmart Technologies

Edited by Computer Guru

It happens to everything >.<

The technical explanation is that in the Win32 API, tooltips are coded to have HWND_TOPMOST as their z-index - meaning that they are on top of everything.

However, due to a series (many) (obvious) bugs and miscodings in the Windows Shell, when you perform certain actions with dialogs and Windows that are supposed to appear above current windows (like the context menu when you right click the start menu items) end up coming even above the HWND_TOPMOST entries as well - that's not supposed to happen.

Then it seems (from here on in, i'm only guessing based on what i can see) that the parent window/dialog (in this case, the start menu, then the taskbar) inherits the window status when the child is closed, and keeps it.

Think of it like Dominoes. The first window is made topmost - no problem. as it closes, it's parent takes that z-index. then its parent, and the next, and the next - until you end up with something in the same x-y plane as a HWND_TOPMOST item, and it ends up with a lower z-index; therefore obscuring that item from view.

Basically, it is something that could be avoided by properly handing off z-indexes and keeping these always under HWND_TOPMOST items.

You are mighty welcome, guys.

I do not use XP anymore to use this, but finally a patch! That was the most annoying thing about XP for the years I used it :angry:

I formatted my Vista two weeks ago, haven't looked back - can you tell me if you follow the steps at the very top of the original post, do your taskbar tooltips get messed up?

I know I saw it once or twice in the 8 months I used Vista RTM; but I don't know if it is 100% reproducible like it is in XP.

You are mighty welcome, guys.

I formatted my Vista two weeks ago, haven't looked back - can you tell me if you follow the steps at the very top of the original post, do your taskbar tooltips get messed up?

I know I saw it once or twice in the 8 months I used Vista RTM; but I don't know if it is 100% reproducible like it is in XP.

No, I haven't seen it ever in Vista and doing the steps aforementioned yielded no results. Looks like they fixed it in Vista.

Hmm. Runs on startup, creates a t.txt in my root, eats up 8 mb of ram, and made an unrecoverable system error after install.

Sorry, but looks rather dangerous.

Also, I don't know since when, but I don't have that problem on my computer. Tried the right click open thingy... Nothing happens.

t.txt is a left over from the debug process, it used to contain the all the HWND_handles for open win32 controls. Must have forgotten to remove it - now it just creates the empty file without writing the handles to it. I guess the inevitable .0.1 build is coming out soon to make t.txt disappear :)

Kill ToolTipFixer.exe in taskmanager than try the right-click, open thing and see if you still have that bug. (what OS)

I'm running Windows XP SP2 manually slipstreamed along with all the other patches and everything.

I tested this in classic and normal mode with the taskbar set to auto-hide or not and with it set to to top, bottom, or side. Each time it could be reproduced so long as tooltipfixer.exe was killed.

Running tooltipfixer.exe fixed the problem and prevented it from happening again.

I'm running Windows XP SP2 manually slipstreamed along with all the other patches and everything.

I tested this in classic and normal mode with the taskbar set to auto-hide or not and with it set to to top, bottom, or side. Each time it could be reproduced so long as tooltipfixer.exe was killed.

Running tooltipfixer.exe fixed the problem and prevented it from happening again.

I uninstalled it and still don't have the issue :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This and Crazy Taxi are the two games that interested me the most from this showcase.
    • Good, because the nonstop chattering from the voices in her head made me quit the second game.
    • This new cabinet design lets you run AMD, Intel, and Nvidia PCs inside one case by Sayan Sen At Computex 2026 earlier this month, AMD announced a couple of new X3D processors for both sockets AM4 and AM5 as it confirmed the support extension of the latter till 2029. And although Intel didn't unveil any new desktop chips, the company's Core Ultra 200S Plus series is relatively new too. Let's say though that you want the best of both worlds simultaneously, and instead of running two different systems, you can have both running together side-by-side, or rather on top of one another. That's exactly what Thermaltake's CAPO X dual system is made for doing. While it's not exactly mandatory to run AMD with Intel, or vice versa, you get the idea. As you can see in the render above, it is essentially like a double-decker PC case that is capable of holding two microATX (mATX) motherboards. Even running just one discrete graphics card in a PC can get toasty, so you may be wondering how well the cooling is designed on the CAPO X, Thermaltake has confirmed, as is evident from the marketing promo image above, that the case supports up to two 360 mm AIO liquid coolers. 420mm is not supported. In total there is room for 13 120mm case fans. In terms of I/O (input/output) options for the two systems, there are naturally two places for those ports, one at the top and one at the very bottom of the chassis in the front panel. In terms of use cases, there are many possibilities. Thermaltake itself, for example, highlights how one system can be your main PC while the other could be the AI agent PC. Another example given is how it can be used to stream and game simultaneously with dedicated systems instead of hogging one with the entire load. Nothing regarding pricing or availability was said. Source: Thermaltake (YouTube, X)
    • There might be some passive design improvements (cooling, etc), but I doubt they'd change the core performance spec of the hardware mid-generation when they've already got a new console in development.
    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer by Pulasthi Ariyasinghe A few months ago, Undead Labs broke its silence about the third entry in the State of Decay series since its announcement in 2020. Today, the studio had a brand-new trailer to reveal at the Xbox Games Showcase, finally giving players a look at the Unreal Engine 5-powered title. A broad 2027 release window is now attached to State of Decay 3 too. The studio confirmed that every scene seen in the gameplay trailer (except for the studio logo) released today is from the game with no cinematic footage. "The quality bar of the moment-to-moment experience is higher than anything we’ve achieved in Undead Labs’ history," says the studio. "State of Decay 3 is being built in Unreal Engine 5, and we’re creating better quality versions of what makes our game the survival sandbox it is, and the combat experience is really, really important to us, and I think you can see it coming through in this trailer." One new aspect of this upcoming entry is the Plague Nests. These are supposed to be dynamic, dungeon‑like enemy hubs with varied “personas” that change tactics each time one appears on a map. These areas will have the best loot in the game for players brave enough to tackle them. The combat system is being overhauled too, letting players do quick and power attacks depending on the situation. This isn't just on the player's side though, as zombies themselves now have multiple new types of behaviors depending on how fresh or decayed they are. "All of these play very differently, especially as you start getting outnumbered or when you’re making noise and running around and trying to save your rear end or the rear end of your friend next to you," adds the developer. Of course, settlement building and community management are massive parts of this third entry too. These are being further expanded with the cooperative focus, giving players much more freedom for playing together than in State of Decay 2. Players will even be able to split up and build settlements in different areas of the same map with different goals. Undead Labs confirmed that playtests are already ongoing for the title, and interested players can sign up to participate by heading over here once more slots open up ahead of the full release. State of Decay 3 is coming out on PC, Xbox Series X|S, PlayStation 5, and Xbox Game Pass sometime in 2027.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      68
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!