Minneapolis: Bridge collapses into Mississippi River


Recommended Posts

Bridge Collapses Into Miss. River

A freeway bridge spanning the Mississippi River collapsed during evening rush hour Wednesday, sending many cars into the water.

Tons of concrete collapsed and there were injuries, authorities said. Survivors were being carried up the riverbank.

Some people were stranded on parts of the bridge that weren't completely submerged.The entire span of the Interstate 35W bridge collapsed about 6:05 p.m. where the freeway crosses the river near University Avenue in Minneapolis.

Source: ABC News ;CNN

Could this be part of a terrorist attack? How old was the bridge?

Not an attack. The bridge was built in 1967, and was under some re-construction work (mostly on the road surface, potholes and such). I read one report that a structural engineer indicated that it seemed to be a steel failure, not a concrete failure, and that the bridge had passed both of its previous two inspections in the past two years.

EDIT: Minnesota born and raised here. My condolences to the families of those who died.

I found this image of the interstate W35 bridge before it collapsed... it looks pretty flimsy for a bridge if you ask me:

http://www.mymotormaid.com/news/bridge.html

Wow, that's significantly higher off the ground than I thought it would be (for some reason). That'd be a hell of a ride (if you survived it).

I'm hearing and reading 3 people dead so far. 50-ish cars involved? Oy... interesting to see a bridge that destroyed just from a collapse.

It was a 40-year-old arch bridge, it's not going to be nearly as durable as something like a suspension bridge. Oddly enough, the bridge was actually undergoing some renovation just before it collapsed, I wonder if that in any way compromised the foundations of the bridge.

Not an attack. The bridge was built in 1967, and was under some re-construction work (mostly on the road surface, potholes and such). I read one report that a structural engineer indicated that it seemed to be a steel failure, not a concrete failure, and that the bridge had passed both of its previous two inspections in the past two years.

EDIT: Minnesota born and raised here. My condolences to the families of those who died.

ahh ok. Just checking. Stange this had collapsed.it was Bulit in 1967 should have stayed. Now a local bridge, located in portland oregon, was bulit in 1925

20040913%20Span%20from%20NE%20medium.jpg

The Sellwood Bridge. Already showing cracks, they had to limet the bridge to 10 tons, causing the busses and trucks to go else ware. They are working on a way to get enough money to replace the bridge. The bridge, the only closest way to get to Oaks Park. A Local amusment park just on the other side of the river. I do bleive the Sellwood bridge is the oldest in the city of portland. Only time untill this one colpases.

I found this image of the interstate W35 bridge before it collapsed... it looks pretty flimsy for a bridge if you ask me:

http://www.mymotormaid.com/news/bridge.html

Yeah, wheres the support? theres NO support...

Yet the bridge has passed two inspections in the last two years. Perhaps they have been using clerks who only look for obvious cracks and not professional engineers to do the inspections.
Yeah, I think those were 'state' inspections. It seems that a federal inspection rated the bridge with a score of 50 (scale of 1 to 120). I guess it makes you wonder how close to "fail" those other "pass" ratings were...

I live in a Southern suburb of Minneapolis and, as someone who has driven over this bridge numerous times, it makes me shiver to think about what was going through people's heads when they flipped into the water. One woman told her story of immediately rolling her window down and swimming out. The water is only 8 to 10ft (2-1/2 to 3m) deep in that area.

What really scares me is what would have happened had I been on there and I had my son in the car. Could I have gotten him out in time? Would we both be dead? I scares the hell out of me just to think of that happening.

My condolences to all who are affected by this. I'm sure I know someone who will have lost someone in this tragedy.

This was unbelievable yesterday (still is). I live about 15 minutes from that bridge and had to use it quite a bit when I worked at my last job. I only wish the best to those involved and their families and friends.

The local news said engineers expect that a replacement bridge will not be up until 2009-2010.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • So the card is targeted at headphone users - so the review should be from someone that uses this - maybe I can review a card next time.
    • I have a older F4-210 NAS, it is pretty basic, the CPU is not the fastest by a long way and only 1GB of ram, but it works fine. I don't understand the need for A.I in a NAS. It seems like A.i is being shoved into everything, if we like it or not. i will stick to my old Terramsater NAS, thankfully the OS is not being updated. Also, got myself a small NAs built using a Raspberry Pi 5. iy usesd less energy, so stays on all the time. As for the unit above, if it is as reliable as my old Terramaster Nas, then it will be a good unit.
    • Gemini in Google Sheets can now help you debug and fix formula errors by David Uzondu Google has started rolling out an update to Gemini in Google Sheets that allows the AI to diagnose and fix formula errors in one click, as long as your Workspace admin has Gemini for Workspace in Sheets turned on. According to Google, the new feature can handle pretty much everything from basic arithmetic to very complex calculations. This ability to debug formula errors comes about two years after Google introduced basic formula generation with Gemini in Sheets. To create a formula with Gemini in Sheets, you open a spreadsheet on your computer and click Ask Gemini in the top right corner. You can also enter an equals sign in any cell and use a shortcut like Ctrl + Alt + G on Windows and Chrome OS, or Command + Ctrl + G on macOS. Once you open the side panel, you write a natural language prompt using your sheet references. For example, you can ask Gemini to divide goals by games, or to find cell C1 in range D:G. If for some reason, the formula Gemini generated doesn't work, or maybe you wrote the formula yourself, you can troubleshoot the issue directly inside the grid. When a cell shows an error message, you hover over it and click "Fix". This action opens the side panel where Gemini analyzes the data structure and automatically applies the fixes when they are ready. You can cancel the process at any time by clicking stop in the side panel. Image via Google Google has been pushing its Gemini integration in Google Sheets for a while now, steadily moving AI features from side panels directly into user spreadsheets. Last year, the Mountain View giant shipped an =AI() Function in Sheets that allowed users to run translation and text generation directly inside cells instead of using the side panel interface. Earlier this year, the company announced that Gemini in Sheets had reached near-human expert performance, achieving a 70.48% success rate on the SpreadsheetBench dataset.
    • I get what you are saying, If i go onto the Instagram site, it says log in with Facebook, but they are not allowed to link my account with Instagram until I do that. Maybe in the U.S, they can link them, but Privacy is not a thing in the U.S. the way things are going,l won;t be any better in the U.K.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!