Halo 03 |News & General| OFFICIAL


Recommended Posts

@ Alpha:

Thats what I thought when I first noticed all the jaggies and really low textures for a AAA title. Where did the free AA support go? The game wasn't rushed by any means so I would have figured that all these "polishes" would have been applied.

Not berating the game or the console for not delivering, its all still great, just... odd? Not even annoying.

I've never been a huge fan of HDR, personally. Sometimes it looks nice, but most of the time it looks fake to me... as in the lighting doesn't look realistic at all. The whites glow far too much, and characters glow in cut scenes in most games with HDR.

I would've preferred better texture work and AA, myself.

I've never been a huge fan of HDR, personally. Sometimes it looks nice, but most of the time it looks fake to me... as in the lighting doesn't look realistic at all.

Same for bloom effects. I think a good example was the Assassins Creed pics posted a week or so ago where the candles looked like they were burning the viewers eyes out, basically glowing pure white.

Also, why have HDR? Doesn't Master Chief have a visor, shouldn't that block out the sun glare?
You'd also think that after gunning on a warthog going around in a arid landscape that the visor would be covered in dirt and dead bugs.

Microsoft?s Xbox 360 has been on the market for two full years now and has created the a gaming experience for millions that has been memorable, unique, and damn fun. There is no question that the 360 is a powerful machine and can create some terrific games. However, with the launch of Halo 3, Microsoft?s own brainchild from Bungie, and the last of a great series, comes a time of sorrow. Although most gamers won?t notice this effect for about another year, it is happening. Let me explain.

The shear fact that Halo 3 was arguably the most anticipated sequel of all time, including all gaming platforms gives Microsoft a very high standard to live up to. Now that it has been released, a new question has been raised. Is the 360 past its prime and now working on the back nine?

Halo 3 has suffered some serious ridicule from a short campaign mode, to the disk actually corrupting the hard drive. Now, I?m not saying that the game is killing consoles, as this topic comes up with every major release and the forums tend to pack with ?_____ bricked my 360?, but I am saying this, Halo 3?s graphics were not up to par for what they should have been, the games packaging showed signs of being rushed as thousands of gamers reported scratched disks right out of the box, and the fact that hundreds of reports keep flying in that the game locks up. So, with these things in mind, let?s focus on one, graphics. If Microsoft themselves can not surpass the technology of games like Bioshock or Heavenly Sword on their own console, with a completely in house development, that has been in the works for well over 3 years, how can one expect to see an increase in quality in games to come? The theory here, is that the Xbox has prematurely reached its potential. Instead of continuing to improve on games graphics and play over the course of the consoles life, they have hit a barrier on the limitations of the system. Graphically, Bioshock is as good as it gets at this point and the truth is, there are a lot of games that look very similar to it, graphically speaking, and they have been releasing them avidly over the last 6 months as the console war amplifies between the 360 and the Playstation 3

http://www.gamerevolver.com/articlenav-52-page-1.html

Talk about a stupid biased article *sighs*

Is Halo 3's save system broken ?

I finished with the 4th mission, then the cut scene happened then i got my achievement unlocked. I started playing the 5th mission but had to leave it since i was out of time. Now when i resume my solo game, it starts me from the starting of the fourth mission. This totally sucks :/

Is Halo 3's save system broken ?

I finished with the 4th mission, then the cut scene happened then i got my achievement unlocked. I started playing the 5th mission but had to leave it since i was out of time. Now when i resume my solo game, it starts me from the starting of the fourth mission. This totally sucks :/

I had the same complaint. It's not that it's broken, it's that you need to manually save your progress when you stop playing.

As for HDR, I think it looks very realistic when you go from a dark area to a light area. That's the point of it being too bright. I guess you don't experience that much from your parent's basement, though... ;) j/k Ayepecks :p

Is Halo 3's save system broken ?

I finished with the 4th mission, then the cut scene happened then i got my achievement unlocked. I started playing the 5th mission but had to leave it since i was out of time. Now when i resume my solo game, it starts me from the starting of the fourth mission. This totally sucks :/

It should work fine, when you quit make sure you pause the game and go down too "Save and Quit" :)

It should work fine, when you quit make sure you pause the game and go down too "Save and Quit" :)

The only "problem" with that is that virtually every other game that goes through levels like Halo 3 does saves as you go. You may not appear in the latest checkpoint but you'd at least be at the last level you loaded up. So it's not an issue if it actually working, it's just the expectations that have been set up from games before it on how it normally works.

Bungie Addresses "640p" Whiners

Over the past few days, we received a ton of emails about Halo 3's "resolution". Seems people had somehow deduced that, for whatever reason, Halo wasn't actually running at 720p, it was running at "640p". Sounded pretty...well, pathetic. Bungie agree. They've thus issued a statement as part of their weekly update, addressed to any and all "interweb detectives" indignant at their short-changed 80p.

One item making the interwebs rounds this week was the scandalous revelation that Halo 3 runs at "640p" which isn't even technically a resolution. However, the interweb detectives did notice that Halo 3's vertical resolution, when captured from a frame buffer, is indeed 640 pixels. So what gives? Did we short change you 80 pixels? Naturally it's more complicated than that. In fact, you could argue we gave you 1280 pixels of vertical resolution, since Halo 3 uses not one, but two frame buffers - both of which render at 1152x640 pixels.

The reason we chose this slightly unorthodox resolution and this very complex use of two buffers is simple enough to see - lighting. We wanted to preserve as much dynamic range as possible - so we use one for the high dynamic range and one for the low dynamic range values. Both are combined to create the finished on screen image. This ability to display a full range of HDR, combined with our advanced lighting, material and postprocessing engine, gives our scenes, large and small, a compelling, convincing and ultimately "real" feeling, and at a steady and smooth frame rate, which in the end was far more important to us than the ability to display a few extra pixels.

Making this decision simpler still is the fact that the 360 scales the "almost-720p" image effortlessly all the way up to 1080p if you so desire. In fact, if you do a comparison shot between the native 1152x640 image and the scaled 1280x720, it's practically impossible to discern the difference. We would ignore it entirely were it not for the internet's propensity for drama where none exists.

In fact the reason we haven't mentioned this before in weekly updates, is the simple fact that it would have distracted conversation away from more important aspects of the game, and given tinfoil hats some new gristle to chew on as they catalogued their toenail clippings.

I'm glad they took this tone. Like they say, internet cry-babies can really poop the party sometimes!

Source: Kotaku

I had the same complaint. It's not that it's broken, it's that you need to manually save your progress when you stop playing.

As for HDR, I think it looks very realistic when you go from a dark area to a light area. That's the point of it being too bright. I guess you don't experience that much from your parent's basement, though... ;) j/k Ayepecks :p

The only complaint I have of the HDR was when using the flame thrower. It's way too much on the eyes imo

Thanks for the heads up. I will be sure to go through 70+ pages next time. :)

Good boy :)

The whole point of the Halo 3 News & General thread, is to keep everything together. Not only are you posting news twice, you aren't doing what DirtyLarry set the thread up for either (N)

I didn't really understand what all the crying was about. But Bungie once again came out and set things straight. They always seem to handle those things well. :)

Anyways, I couldn't really give a crap eitherways, Halo 3 looks great as it is imo. It could run on 640*480 for all I care. XD

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!