Guitar Hero 3 PC


Recommended Posts

i've tried configuring my gamepad for it but nothing seems comfortable enough. what's the buttons layout on the ps3\xbox360 on a gamepad?

Heres the x360 setup for you

Green - Left Trigger

Red - Left Button

Yellow - Right Button

Blue - Right Trigger

Orange - A Button

I at least got all the Frets configured correctly, mouse shouldnt be hard...

Im using JoyToKey to Map the keyboard keys i use to my Joypad, plus, since im used to PS2 with no Strum, i binded the Strum key to every other key, that way i dont have to press it separately..., and my wrists doesnt suffer at all :), try JoyToKey :)

EDIT: AFter a quick try, i cant configure whammy either..., its weird tho, the mapping is working under Windows

Edited by Dom

i play with a x360 controller and all i have to do is to press the buttons i dont have to strum at all, at first i thought it was just because of easy, but medium is the same, my mate also has GHIII on the PC and he doesnt have to strum either,

Notice: The Nvidia Geforce 8400 and 8500 cards have known issues on Vista machines with AMD CPUs.

Has anyone with an 8400 or 8500 tried this on Vista and can confirm the issues? This is the only issue I have with my PC since I already meet the other recommended requirements. I don't mind running it on XP since I have a dual boot system. I just want to make sure beforehand so I know where to install it. I already have the game but can't play it until my birthday party (my brother bought it for me).

I cannot upload my profile, dunno how to save it, but here's a screenshot...

V: Strum Up

E: Green Fret

R: Red Fret

U: Yellow Fret

I: Blue Fret

Orange Fret its still not configured :p...

Im using a generic PS2-Style Joypad (2L Buttons, 2R Buttons, 2 Analogs, 4 Normal Buttons, Directional Pad and tons of useless Start and Turbo Buttons)

If you dont know which key is which, open up the configuration in Control Panel of your Joystick, and press the buttons there, itll show you which buton is which and you can map them correctly in JoyToKey :)...

untitlwczr.jpg

PD: Imageshack sucks and im late for school because of this post... :p!

thanks mate.

i've got a weird problems with this game, its always configured P1 lefty (the green red yellow are backwards) when i change it in the game controls it will change back to lefty when game restarts.

plus, and this is really beyond me, if im connected to the internet the game crushes to desktop when trying to find in game servers (i've tried disabling my firewall completely .. :\

only in vista though, in xp i can connect to servers etc'

You gotta disable lefty in the Keyboard options directly trough the Options menu in the Main Menu...

For the servers, i dunno, im on XP and i dont remember either if i blocked the access to internet, or it simply cannot connect to the servers.

i did.. its keep coming back..

there are various ports in the readme that it suggests that you open if your having problems, give ma a sec and i'll dig em out for you

The game uses port 3074. If the computer running Guitar Hero III is behind a firewall and you are having difficulty with online functionality, try opening ports 80 TCP, 2270 UDP, 2280 UDP, 3074 TCP/UDP and 50000 UDP.
thanks mate.

i've got a weird problems with this game, its always configured P1 lefty (the green red yellow are backwards) when i change it in the game controls it will change back to lefty when game restarts.

plus, and this is really beyond me, if im connected to the internet the game crushes to desktop when trying to find in game servers (i've tried disabling my firewall completely .. :\

only in vista though, in xp i can connect to servers etc'

didn't helped much

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!