Asus M2N32-sli deluxe how to set bios


Recommended Posts

Trying to find any help in how to set the bios up so that it will run this DDR2-1000 at the correct speed.

I have set all the timings and voltages to the correct timings but can't find anywhere to set the speed to 1000

If anyone has this same mobo or has had similar problems any suggestions would be greatly appreciated...

See specs below....

Think I have it figured out sort of.... :wacko:

right now I appear to be running stable after running several benchmarks and super pi and some prime...

along with normal gaming.....

I am at 3195mhz 1.34v (highest setting I tried so far until I get new HSF)

memory is 523mhz with fsb/6 5-5-5-15 2.0v (have not tried different timings as of yet)

so now my memory is over the DDR2 1000 which I was trying to reach earlier... Not sure if there is away just to change the setting in the bios to raise the memory to run at its standard default of DDR2 1000 and not ddr2 800....Only settings in bios I have are DDR2 400/533/667/800...I hope but doubt they will do an updated bios just to increase the stepping in memory as it is getting faster and faster....

Right now I am on the stock HSF and I am running idle at 41c with only an external exhaust fan running at the back of the machine until my new quieter fans come in tomorrow....

Does anyone have a chart or link to share that gives safe temperatures for this CPU? AMD AM2 5200+ 65w

I saw it reach about 52c while I was doing benchmarks tests and gaming but I do know that temp will drop after air flow returns with the new fans...

Think I have it figured out sort of.... :wacko:

right now I appear to be running stable after running several benchmarks and super pi and some prime...

along with normal gaming.....

I am at 3195mhz 1.34v (highest setting I tried so far until I get new HSF)

memory is 523mhz with fsb/6 5-5-5-15 2.0v (have not tried different timings as of yet)

so now my memory is over the DDR2 1000 which I was trying to reach earlier... Not sure if there is away just to change the setting in the bios to raise the memory to run at its standard default of DDR2 1000 and not ddr2 800....Only settings in bios I have are DDR2 400/533/667/800...I hope but doubt they will do an updated bios just to increase the stepping in memory as it is getting faster and faster....

Right now I am on the stock HSF and I am running idle at 41c with only an external exhaust fan running at the back of the machine until my new quieter fans come in tomorrow....

Does anyone have a chart or link to share that gives safe temperatures for this CPU? AMD AM2 5200+ 65w

I saw it reach about 52c while I was doing benchmarks tests and gaming but I do know that temp will drop after air flow returns with the new fans...

BIOS version 1503 should provide the settings you seek as it is an update to support socket AM2+ (Phenom) I would procede with caution though as I beleive some people were having problems with the HT link speed multiplier defaulting to 1x with this BIOS. Asus BIOS 1503

Product information for your CPU can be viewed here. X2 5200+ specs AMD

BIOS version 1503 should provide the settings you seek as it is an update to support socket AM2+ (Phenom) I would procede with caution though as I beleive some people were having problems with the HT link speed multiplier defaulting to 1x with this BIOS. Asus BIOS 1503

Product information for your CPU can be viewed here. X2 5200+ specs AMD

Thanks for the links....

Not sure what is going on with the Asus Probe II it is reading 42c most of the time then it will instantly jump to say 49-53c then back down....This was happening a lot at first now it is pretty much stablized around 40-42c idle still a little on the warm side for my liking...as I came off my old system Opteron 165 OC @ 2.75 and ran much cooler at 29-31c........

This motherboard is running @ 37c which appears to be pretty normal. Any idea on the CPU? I used just the stock HSF with the thermal pad it came with. Tempted to pull it out clean it of and AS5 it....but I have used stock hsf before with thermal pads and never ran this warm right out of the box....

I took the OCing off and back at stock speeds and CPU 1.25v........

Granted also I have all fans hooked up to motherboard plugs none are on their own power...

Think it would help to plug them straight into their own power?

This is how my fans are set up and the RPM and CFM they are running...If you see something I should do say swap out the exhaust with the front intake I might do so if people think it would benefit the air flow and cooling...

Front of case intake Scythe S-FLEX SFF21E 120mm Case Fan 49cfm @1200rpm 20.1dba 120mm

Side of case intake SILVERSTONE FN82 80mm Case Fan 36.89cfm @ 2100rpm 26dba 80mm

Rear exhaust EVERCOOL SFF-12 120mm Case Fan 80cfm @ 2000rpm <25dba 120mm

Not including the stock PSU 120mm fan for exhaust as well....

Only down fall with the 80cfm is it is the loudest of them all but most of that is the fact it is blowing the air out the holes in the back and that is what is actually causing the noise not the fan itself....

I don't think it really matters about which fan is in front or back but if I am wrong please let me know...Just trying to get the temps down even lower than what they are now....

and YES I am going to be looking also for a better aftermarket HSF but have read where some people are having problems find units that will fit this board and not conflict with the heatpipe cooling that is on the board.....

So suggestions on the HSF as well as if I should move my fans around would be greatly appreciated...

I know this thing is going to be easy to OC as I have had it to 3.2ghz so far with only increasing the fsb and lowering the HTT leaving the DDR2 setting on 800, Locked all the other settings and left CPU Voltage on auto but at 3.2ghz it went up to 1.34 which I still don't think is that high...

Wondering if anyone knows how to boost the fan on the heatsink as it normally runs around 3000rpm but it is rated 3000-6000rpm.

I have looked through the bios and only notice I can change the q-fan in bios from optimal/quiet/performance, or disabled....

I have tried all settings but nothing seems to change the rpms... Any ideas?

I found out why my CPU temps were changing the way they were...had something still running in background on boot-up... :blush:

I do think I am safer than I thought I was as I just played crysis on higher settings for about an hour with the pc-probe II cpu temp (all other closed) on top and never saw it get above 48c...still think I could get better overall temps with a better HSF....Think I am going to swap out the stock HSF that came with my old Opteron 165 (with 4 heatpipes) and see how it does tomorrow....

One thing I feel I should mention is that I doubt you are stable at those speeds/specs. The reasons I say this is game play is one thing but true stability is quite another. Why is stability important? B/c one day you don't want a BSOD that results in loss of data. I recommend running Orthos Stress Pirme for @ least 6hours on Blended or Small FFT to determine your true stability.

Another thing is Asus Probe is not a good indication of core temps. For a AMD CPU I recommend Core Temp 0.96.1 as it is much more accurate than Speedfan (total crap for AMD) or Asus probe.

Is Orthos better than Prime95? I have been running Prime95 stress test now going on 8 hours now and not slowing down this machine at all....as I sit here and type this Temps are still not going above 51c. I took the OC back up to where I had it until I was concerned about the heat but after gaming and the temps did not rise much decided to put it back to the OC settings....still running strong..I have be away from my computer most of the day today but I will continue running Prime and see just how long it runs before crapping out...

Prime95 was still going until about an hour ago when I shut it down ran for just over 16 1/2 hours.... :woot: at 3.2ghz so to that seems pretty stable...

Still wondering though if Orthos test does different or more deep stress testing?...

It does indeed sound pretty stable! Orthos does the same thing as Prime95 just in a niftier package, as long as testing with 2 instances or Prime95 (one for each core) or using the latest version that test's both cores it's just as good as Orthos really.

I have now swapped out heatsinks and fan....from the stock one that came with the 5200+ to the stock one that came with my opty 165 with 4 heatpipes... I have dropped -5c now running at 37-38c idle and also my motherboard temps have also dropped too by -5c...now running at 32-33c.... What if any difference would I see with an aftermarket HSF???

The reason I ask the last question is that I know the 4 heatpipe stock HSF is very close and better performance to some of after market units you can buy...

Any aftermarket units that can work in the Asus M2N32-sli deluxe that might out perform the stock 4 pipe? Please on suggest HSF units that will work this board as I have heard people having problems getting some units to work with this board can be a total pain if not impossible as the heatpipe cooling on the motherboard can get in the way of some of the larger units...

Ok I wanted to throw up several screen shots real quick to show just some of the settings and such as you can see Prime is running in the background again this time (about 6 hours during this test so far). I lowered from 3.2ghz backed off to 3.0ghz only difference I did was took the multiplier down from 12 to 11. I was also curious about the HTT so I just kicked it back up to x5 and so it is running at 1375 or 2750 :D I also took the cpu voltage off of auto and set them to 1.30v which is .05 increase over stock...

So far can't complain about this set-up having had 2 successful OC's 1st at 3.2ghz and now backed it down to 3.0ghz...

Also wanted to say I put the memory on a divider now as well was running well over specs at DDR2 1000 (in bios had to set it to ddr2 1066...but now at DDR2 800)

I am trying to see just how high I can go with just the CPU and HTT then once I error out I will lower the HTT and find out if it is stable again...Then I will start increasing the memory until I find my highest OVERCLOCK which is stable for both the CPU and MEMORY....

Here are the pics...

Might want to add incase someone sees my temps it is going between 51-55c which I feel comfortable with the system temps as they instantly drop back down to upper 30's when I shut down dual prime...Still would like to find a better HSF unit that might keep it around 50c or better under load which would make me feel even better.... :yes:

post-65183-1200735883_thumb.jpg

post-65183-1200735935.jpg

Still stable at 3.1ghz 282x11 @ 1.32v 41-42c idle/55c 100% load

HTT is 1410 282x5

Just how high does this go? I thought it was limited to closer to 1000

Also once the memory starts reaching the DDR2 1200 range CPU-Z goes blank in the:

Frequency: (blank)

FSB/DRAM: (blank)

yet all the timings are correct.....why might this be does CPU-Z not go that high for the memory?

took the DDR2 setting back up to 1066 setting in bios @ 2.0v

dual prime 95 or 2 hours still running still running strong....

everything I have thrown at his so far has not given me 1 blue screen or any faults in prime....either I have a heck of a CPU and memory or something is not registering right......hope it is the CPU/Ram....

Also in Vista scoring I am now at 5.5 cpu and 5.9 for everything else....before at stock settings I was 5.1 cpu and 5.9 for everything else...

Stepping on CPU just if anyone is wondering are

ADO5200IAA6CZ

CCB8F 0727RPMW

1724004670646

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Amazon Prime Day 2026: Best Dolby soundbar deals from Sony, Samsung, JBL, Polk, and more by Sayan Sen Yesterday we covered the JBL BAR 800 which is a 5.1.2 Dolby Atmos/Vision soundbar. The unit is on sale for its lowest ever price of just $800 making it a solid offer. However, there are many more options to choose from and in this article, we have made a compilation of the best deals including from Sony, Polk, Yamaha, Denon, Samsung and more. Sony's BAR models are currently at their lowest prices which makes them solid offerings. The company's BRAVIA Theatre Bar lineup is designed to suit different home cinema needs. The Bar 5 is an entry-level 3.1-channel soundbar with a wireless subwoofer, supporting Dolby Atmos®, DTS:X, S-Force PRO Front Surround, and Vertical Surround Engine for immersive audio with clear dialogue. The Bar 6 upgrades to a 3.1.2-channel configuration by adding dedicated up-firing speakers for more convincing overhead Atmos effects while retaining the wireless subwoofer. At the premium end, the Bar 7, Bar 8, and flagship Bar 9 are single-soundbar solutions featuring Sony’s 360 Spatial Sound Mapping technology, which creates phantom speakers for a wider surround field. Bar 7 includes nine speaker units, Bar 8 increases this to eleven, and Bar 9 offers thirteen speaker driver units promising the most expansive soundstage and acoustic performance. All models should integrate seamlessly with compatible BRAVIA TVs and support the BRAVIA Connect app for setup and control. Get them at the links below: Sony BRAVIA Theater Bar 9 Soundbar (HT-A9000): $998.00 (Amazon US) (Was: $1498) Sony BRAVIA Theater Bar 8 Soundbar (HT-A9000): $798.00 (Amazon US) (Was: $998) Sony BRAVIA Theater Bar 7 Soundbar (HT-A7100): $618.00 (Amazon US) (Was: $768) Sony BRAVIA Theater System 6: $548.00 | Sony BRAVIA Theater Bar 6: $448.00 Sony BRAVIA Theater Bar 5 (HT-B500): $278.00 (Amazon US) (Was: $348) Sony HT-S400 2.1 soundbar: $198.00 (Amazon US) (Was: $248) Aside from those, we also have more discounts including from Samsung, Polk Audio, and more: Samsung Q-Series Soundbar HW-QS90H 7.1.2: $797.99 (Amazon US) (Was: $998) Polk Audio Signa S4: $336.00 (Amazon US) (Was: $449) Hisense AX3120Q: $229.00 (Amazon US) (Was: $259) Check out more soundbar deals that you may like at this link. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Stellarium 26.2 by Razvan Serea Stellarium is a free open source planetarium for your computer. It shows a realistic sky in 3D, just like what you see with the naked eye, binoculars or a telescope. It is being used in planetarium projectors. Just set your coordinates and go. Stellarium key features: Realistic simulation of the sky, sunrise and sunset Default catalogue of over 600,000 stars Downloadable additional catalogues for up to 210 million stars Catalog data for all New General Catalogue (NGC) objects Images of almost all Messier objects and the Milky Way Artistic illustrations for all 88 modern constellations More than a dozen different cultures with their constellations Solar and lunar eclipse simulation Photorealistic landscapes (more are available on the website) Scripting support with ECMAScript (a few demo scripts are included) Extendable with plug-ins: 8 plug-ins installed by default, including: artificial satellites plug-in (updated from an on-line TLE database) ocular simulation plug-in (shows how objects look like in a given ocular) Solar System editor plug-in (imports comet and asteroid data from the MPC) telescope control plug-in (Meade LX200 and Celestron NexStar compatible) The major changes of this version: Added new sky culture Added new plugin: Planes Many improvements in plugins Many improvements in Core and GUI Many updates in sky cultures. [full release notes] Download: Stellarium 26.2 (64-bit) | 456.0 MB (Open Source) View: Stellarium Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NASA: This asteroid may not kill us but it probably won't be far off either by Sayan Sen Image by Zelch Csaba via Pexels New observations by NASA's James Webb Space Telescope have eliminated the last remaining impact threat posed by asteroid 2024 YR4, ruling out the possibility that the near-Earth object could strike the Moon in December 2032. NASA said observations collected by Webb on February 18 and 26, 2026, enabled scientists to refine the asteroid's orbit enough to "rule out a chance of lunar impact on Dec. 22, 2032." Instead, asteroid 2024 YR4 is now expected to pass the Moon at a distance of about 13,200 miles (21,200 km). The agency stressed that the update "reflects improved precision in our understanding of where the asteroid is expected to be in 2032 rather than a shift in its orbital path." The announcement closes a remarkable chapter in planetary defence that began in late 2024, when the approximately 60-metre-wide asteroid briefly became the most closely watched near-Earth object in the world. Discovered on December 27, 2024, by the ATLAS telescope in Chile, 2024 YR4 initially appeared to have a small chance of colliding with Earth on December 22, 2032. As astronomers gathered more observations, the impact probability briefly climbed to around 3%—the highest ever recorded for an asteroid of its size—before steadily falling as its orbit became better understood. By early 2025, international observations had ruled out any significant risk to Earth. However, astronomers were left with another possibility: a roughly 4% chance that the asteroid could instead strike the Moon. "The probability that asteroid 2024 YR4 will strike the Moon on 22 December 2032 is now approximately 4%," the European Space Agency (ESA) had said last year, noting that "there is a 96% chance that the asteroid will not impact the Moon." ESA said such an impact, while unlikely, would have presented an extraordinary scientific opportunity. "It is a very rare event for an asteroid this large to impact the Moon – and it is rarer still that we know about it in advance. The impact would likely be visible from Earth, and so scientists will be very excited by the prospect of observing and analysing it," said Richard Moissl, Head of ESA's Planetary Defence Office. "It would certainly leave a new crater on the surface. However, we wouldn't be able to accurately predict in advance how much material would be thrown into space, or whether any would reach Earth," he added. The asteroid also exposed an important blind spot in planetary defence. Because 2024 YR4 approached Earth from the direction of the Sun, it remained hidden from ground-based telescopes until after its closest approach. "We looked into how Neomir would have performed in this situation, and the simulations surprised even us," Moissl said. "Neomir would have detected asteroid 2024 YR4 about a month earlier than ground-based telescopes did. This would have given astronomers more time to study the asteroid's trajectory and allowed them to much sooner rule out any chance of Earth impact in 2032." He added, "As an infrared telescope, like Webb, Neomir would have also immediately given us a much better estimate for the asteroid's size, which is very important for assessing the significance of the hazard." The latest NASA observations underscore the value of space-based infrared telescopes in tracking faint asteroids. According to NASA, Webb made "among the faintest ever observations of an asteroid," extending the object's observational record by nearly eight months at a time when it had become too faint for other telescopes. That additional data allowed scientists to eliminate the remaining uncertainty surrounding its 2032 flyby. Although asteroid 2024 YR4 is now confirmed to pose no threat to either Earth or the Moon, scientists say its discovery remains one of the most significant real-world tests of the international planetary defence system, demonstrating how continued observations can rapidly transform an object once considered hazardous into one whose future path is known with high confidence. Source: NASA, ESA This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
  • Recent Achievements

    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
    • One Month Later
      The_Focal_Point earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      418
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      130
    4. 4
      Xenon
      69
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!