Recommended Posts

Wasn't this pinned?

 

 

I agreed with Munky to unpin the thread as I never made a new guide. Most people around here know about UMS so I didn't really think the topic needed to be pinned until I/someone else maybe made a PS4 guide? (once DLNA is added). Thing is it'll probably work 1:1 the same as the PS3 anyway :p

 

Years ago PSMS/UMS were harder to use, and weren't always good at transcoding, now it really is just install, and play. Not much need for a guide IMO.

 

In fact the guide was originally made for MKV2VOB!

 

Sorry, that's my fault. AB and I spoke via PM if he had plans to upload a new version of the guide or create a new one. If you guys still want to make use of this topic then we'll keep it pinned :)

 

@AB, I hope you don't mind but I remembered you posted the guide to another forum and I have copied it back to the OP. It's not perfect, as Neowin as a picture limit (news to me), so I've had to edit the PSP Remote Play section. Hope you don't mind. It's probably not the most recent version you wrote but maybe it'll come in use for someone and will at least be archived now.

Sorry, that's my fault. AB and I spoke via PM if he had plans to upload a new version of the guide or create a new one. If you guys still want to make use of this topic then we'll keep it pinned :)

 

@AB, I hope you don't mind but I remembered you posted the guide to another forum and I have copied it back to the OP. It's not perfect as Neowin as a picture limit (news to me), so I've had to edit the PSP Remote Play section. Hope you don't mind. It's probably not the most recent version you wrote but maybe it'll come in use for someone and will at least be archived now.

 

That's an ooolllldddd guide :P Ah well, nostalgic reasons and all that! Sony better have DLNA support in this months rumoured PS4 FW.

That's an ooolllldddd guide :p Ah well, nostalgic reasons and all that! Sony better have DLNA support in this months rumoured PS4 FW.

 

Yeah I figured it would be. As you say though, it's more straight forward now than it was to begin with (Y)

Universal Media Server v3.3.0: Mac / Windows / Linux

This release lets you further customize your server name, automatically muxes more types of files, improves video compatibility, especially on Panasonic TVs, and more!

  • General:
    • Added the option to toggle the display of the profile name after the server name on the renderer
    • Added a warning on the Status tab if the UMS port is being blocked
    • Added some missing entries to UMS.conf
    • Added automatic video scaling to renderer resolution limits in FFmpeg
    • Added the ability to use asterisks for the "Force transcoding" and "Skip transcoding" options
    • Added config option "itunes_library_path"
    • Improved detection of which videos should be muxed automatically when using MEncoder or FFmpeg
    • Fixed files with compatible video but incompatible audio not muxing video
    • Fixed support for outputting 24-bit FLAC files as 24-bit by muxing them with video
    • Fixed audio playback if VLC is enabled
    • Made server restarts more reliable
    • Made sure FFmpeg outputs a compatible colorspace when transcoding to H.264
    • Made sure the transcode folder appears before files instead of after (below)
    • Renamed config setting "ffmpeg_font_config" to "ffmpeg_fontconfig"
    • Renamed config setting "hide_new_media" to "hide_new_media_folder"
  • Renderers:
    • Improved video compatibility on Panasonic TVs
    • Updated the PS3 image
    • Updated the XBMC logo
  • Languages:
    • Minor language tweaks
    • Renamed "Advanced Monitoring" to "Include in New Media folder"

 

 

Upgrade Notes:
For all versions below 3.2.0: If you have enabled FFmpeg's fontconfig or hid the New Media folder, you will need to re-apply those settings.
For all versions below 3.0.0-b1: It is recommended to delete your UMS.conf file prior to installing this version. Windows users can choose the "clean install" option while installing instead.

If it actually works, I might have a reason to start using my PS3 again for something other than a dust collector!

 

It works great, simply passes AC3 audio straight to your receiver like with DTS. I guess if you have any cinavia protected MP3 audio content you'll simply need to transcode to AC3 before playing - Not that the transcoding matters audio quality wise here, if you're playing an audio track in MP3 I'm going to guess it's a 'cinema' copy ;)

It works great, simply passes AC3 audio straight to your receiver like with DTS. I guess if you have any cinavia protected MP3 audio content you'll simply need to transcode to AC3 before playing - Not that the transcoding matters audio quality wise here, if you're playing an audio track in MP3 I'm going to guess it's a 'cinema' copy ;)

Guess I'll have to wait til it makes it into a normal build to see if it works with my awful setup.

Guess I'll have to wait til it makes it into a normal build to see if it works with my awful setup.

 

I'll upload my build just now!

 

Here (has the cinavia AC3 removal) - https://dl.dropboxusercontent.com/u/10631352/UMS.exe

Thanks for the upload. Now time to acquire some media with cinavia on it. :shifty:

 

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

Well that's the reason I called it my "awful setup." I don't have any of the fancy dodads to send the signal to my TV, It's literally just my PS3 plugged directly into an HDMI port on my TV. Then once I found out about all this cinavia junk, I darted through the internet trying to find a fix for the PS3 (a setting or workaround for the media) and found nothing that worked. Scraped together enough money to buy a used WD TV Live that ignores cinavia just to watch anything and it was smooth sailing from then on out.

 

So if all of this works, It'll be nice to have a reason to use my PS3 again and go back to making the coverart thumbnail things to make it look nice. If not, WD TV here I come.

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

If receivers picked up Cinavia they'd refuse to play back nearly any Bluray.

 

Cinavia is meant to be triggered at the 'source', the player decoding the file.

If receivers picked up Cinavia they'd refuse to play back nearly any Bluray.

 

Cinavia is meant to be triggered at the 'source', the player decoding the file.

 

Ah right! I had an update for my Panasonic receiver to remove cinavia but I didn't click till know it will be in regards to the in-built media/blu-ray player.

  • 3 weeks later...

Made a slightly newer build for everyone, still no official build - https://dl.dropboxusercontent.com/u/10631352/UMS.exe

 

This is now based off of 3.4.0

This topic is now closed to further replies.
  • Posts

    • Did you watch the keynote? It is way beyond what is described in this article. Looks interesting. Now it is time for them to deliver unlike what happened in 24.
    • It pretty much has to be compatible with MS Office or it is going nowhere. The rest of the world runs office including Europe. If it is not compatible it will not survive.
    • Incredible deal gets you free NVMe 512GB SSD with AMD AM5 B850 motherboard for only $150 by Sayan Sen Earlier this week we covered the story of an interesting PC case wherein you can build two full-size computers inside it as in it can house and run an AMD and an Intel system simultaneously. Speaking of building PCs, these are hard times to make one for sure as prices are often very high except during flash sales or discounts. If you are in the market for a 1080p gaming PC then Nvidia's 8GB RTX 5060 Ti is currently on sale for just $330 and you get the latest James Bond game too, for free. Speaking of which, right now there is another incredible sale going on as we can get a free 512 GB NVMe SSD from TeamGroup in the form of the G50 alongside the purchase of an AMD B850 socket AM5 motherboard for only $150 (purchase link under the specs table down below). Getting an AM5 motherboard now in 2026 will be a wise investment for sure, especially since AMD confirmed its commitment to support the socket till at least 2029. The MSI PRO B850M-P WIFI is a micro-ATX motherboard that is compatible with AMD Ryzen 9000 series processors. Since it is AM5, the motherboard works with DDR5 memory and includes MSI’s Memory Boost technology, along with EXPO and XMP support. Connectivity features include built-in Wi-Fi 7 paired with a 5G LAN solution. The board offers a PCIe 5.0 M.2 slot with MSI’s EZ M.2 Shield Frozr II thermal solution, that is said to help maintain SSD performance by providing ample cooling against overheating. The technical specifications of the MSI PRO B850M-P WIFI motherboard are given in the table below: The free TeamGroup T-FORCE G50 NVMe SSD is a PCIe Gen4 and as such it promises to deliver sequential read speeds of up to 5,000 MB/s, helping accelerate game loading, file transfers, and everyday computing tasks. The SSD features an InnoGrit controller and SLC caching technology to support consistent performance. An ultra-thin, patented graphene heatsink is included to aid in heat dissipation. The NAND flash is based on TLC which means it has plenty of endurance up its sleeve. The random performance may not be as amazing as other drives with DRAM though. Still it should be very good since it can access system memory via HMB to use it as its DRAM cache. The technical specifications of the TeamGroup 512GB G50 NVMe SSD are given in the table below: Get it at the link below: MSI PRO B850M-P WIFI AM5 AMD motherboard + Team Group T-FORCE G50 512GB SSD (free gift): $149.99 (Sold and Shipped by Newegg US) This Newegg deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • RapidRAW 1.5.7 by Razvan Serea RapidRAW is a beautiful, non-destructive, GPU‑accelerated RAW image editor designed for speed and simplicity. It uses a lightweight (~30 MB), efficient code base built with Rust, React and Tauri. Ideal for Lightroom workflows, it offers rich editing tools—exposure, contrast, highlights, shadows, whites/blacks, tone curves, HSL mixer, dehaze, vignetting, film grain, sharpening, clarity and noise reduction—processed in real-time on the GPU. Features include intuitive masking (brush, linear, radial, AI-powered subject and foreground detection), generative edit layers (via ComfyUI), 32‑bit precision, and full RAW format support through rawler. RapidRAW also provides library management (folder navigation, ratings, metadata, EXIF viewer), batch operations, export presets (JPEG/PNG/TIFF), sidecar editing (.rrdata), undo/redo history, customizable UI themes, smooth animations, resizable panels, and preset copy/paste. A modern high-performance Lightroom alternative with polished UX and creative tools, RapidRAW brings powerful photo editing to photographers seeking speed, responsive GPU feedback, and streamlined workflows. RapidRAW v1.5.7 release notes: This update serves as a direct follow-up to the core architectural migration introduced in v1.5.6. While the transition to a more modular state management system marked a significant step forward for RapidRAW's stability and long-term maintainability, it also introduced several edge cases and regressions within the library and editing workflows. This release focuses on addressing those issues, with a particular emphasis on a complete overhaul of library performance to ensure smooth and responsive browsing following the refactoring. It also resolves inconsistencies in the copy-and-paste workflow and expands RapidRAW's accessibility by adding support for eight additional languages. [full changelog] Download: RapidRAW 1.5.7 | ARM64 | ~20.0 MB (Open Source) View: RapidRAW Home Page | Screenshot | Other operating systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Thank god they got rid of the disgusting looking sidebars, and the corner radius looks much better, too. Two things I hated on day one, and never got used to.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      223
    3. 3
      ATLien_0
      87
    4. 4
      Steven P.
      80
    5. 5
      +Edouard
      80
  • Tell a friend

    Love Neowin? Tell a friend!