[BEWARE!] Fake iPhones in circulation. Say hello to HiPhone!


Recommended Posts

I highly doubt that. Plus no WiFi, 3G, iTunes Store, free use of WiFI networks, unlimited data.

The iphone doesn't have 3G ... Also you repeated the point of WIFI twice. Not all WIFI spots are free anyways. (Most are, yes I know)

Also the iphone itself doesn't come with unlimited data, that's the plan. If I were to get an unlocked iphone and bring it to Canada, I'm sure as hell that i wouldn't get an untl data plan.

Poor argument on your half :/

I know I listed WiFi twice. And I know the iPhone doesn't do 3G. Fact is, you might be paying less but your getting an inferior product, no support, no software updates, no build quality. Its twice as thick as an iPhone. Oh wait, you do get 2 batteries and a memory card (how much can you fit on 512MB?) and it can use two SIMS. Woopeee!

Yeah...so? I don't think anyone here is even trying to imply that it's an "iphone killer" in any regard, you get what you pay for and in this case of course it's going to be inferior in some respects, but for what you're paying, it's a bloody impressive device.

Yeah...so? I don't think anyone here is even trying to imply that it's an "iphone killer" in any regard, you get what you pay for and in this case of course it's going to be inferior in some respects, but for what you're paying, it's a bloody impressive device.

I think it will only be an impressive device if it was designed by someone from the ground up and not a rip off of someone else's hard work.

I doubt this phone can hold up to the original version. My iphone looks somewhat pretty scratched up on the back and still not a mark on my screen. I can see the screen going out after a few drops with this phone.

Yeah...so? I don't think anyone here is even trying to imply that it's an "iphone killer" in any regard, you get what you pay for and in this case of course it's going to be inferior in some respects, but for what you're paying, it's a bloody impressive device.

Impressive!? It's a complete rip, how is that at all impressive? :x

I doubt this phone can hold up to the original version. My iphone looks somewhat pretty scratched up on the back and still not a mark on my screen. I can see the screen going out after a few drops with this phone.

Its pretty common with all unbranded Chinese phones. I have two of them which I bought dirt cheap for like 40 quid each, under the brand of trend mobile and after just one drop their screen was cracked and blank. The nokia n80, which I have been using for 2 years now has slipped from my hand more than 10 times, of which IIRC 5 times was on a marble floor, twice on the road and once it hit a metal fence, even then no harm done either to the screen or the camera.

Yeah but it doesn't do Next-G, so I still can't get it :p lol

How much ram do you rekon's built in? 256mb? 512mb? :p

You don't need NextG for MMS mate. It works over the GSM networks in Australia too....

It looks like the real thing but as it lacks anything to do with Apple it makes the original iPhone look like a bargain.

How does it lack anything to do with Apple? It looks like the iPhone and when it boots up it shows the Apple logo.

Impressive!? It's a complete rip, how is that at all impressive? :x

Because the amount of detail they've went into is staggaring, plus they've actually went out on a limb and added a few features that the iPhone didn't support (such as dual sim). It may be a complete imitation, but for that price you'd be hard pushed to find an equivalent phone in the west, iphone or not.

^its not that bad.

but buying Chinese stuff is bad :p

Dude I dare say that 80% of the electronics in your house were probably manufactured in China...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • How about a global switch to turn the awful things off instead of a registry hack? Then everyone wins.
    • This doesn't strike me as so shocking when... " IT admins do have some control over this rollout. If they choose to opt out, devices in their tenant won't automatically get the dreaded Copilot app"
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      PsYcHoKiLLa
      257
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!