which do you like better?


Which do you like better?  

36 members have voted

  1. 1. Which do you like better?

    • Original
      2
    • Aperture Edited
      2
    • Tone Mapped
      26
    • HDR
      6


Recommended Posts

Ok, so I'm trying not to get 100% sucked into HDR, and I'm trying to just take single pictures and figure out how to edit them. But the problem is, I see my HDR images, and then my edited images, and can't help but thinking the HDR is so much better.

So, which one do you guys like better? Any suggestions? Etc.

Original Image (RAW converted to JPG)

lakeoriginal.jpg

Edited with Aperture (I tried my best. If you think you can do better, which you probably can, see the end of my post)*

lakeedit.jpg

Single RAW Tone Mapped with Photomatix.

laketonemap.jpg

5 RAW exposures combined into HDR with Photomatix.

lakehdr.jpg

* If you think you can do better using Photoshop, or what ever, then please show me! I challenge all of you to show me what you can do. Here is the original RAW file: http://crazzy88ss.statichost.co.uk/p/lakeraw.NEF

Link to comment
https://www.neowin.net/forum/topic/621769-which-do-you-like-better/
Share on other sites

I challenge you to blend manual exposures that are bracketed, or at least use a graduated neutral density filter. The sky is completely blown out and pretty much jacked. There isn't much to work with to be perfectly honest. I was able to somewhat save the image but the sky is just too blown out to bother with it. Sorry, that's just how it is.

A circular polarizer may have helped this image out too, but even then the sky is just too bright compared to the foreground. If the clouds were moving, then a bracketed set of images would have shown blurring in the clouds which could look good or bad depending on how fast they were moving.

The 4th image is 5 bracket manual exposures... Which is why there's the clouds look the way they do.

I really think you should invest in some GND filters. Meter the sky and the foreground, pick the right filter for the difference in lighting, and shoot away. You might blur the clouds a little bit depending on how it's done, but it's the best way to get the most natural exposure that doesn't looked heavily altered.

If you want to see what a GND filter can do, take a look at the work of Marc Adamus. Seriously, you will never want to use HDR again because you won't have to. :)

So basically the GND filters allow you to get a proper exposure on the whole image in one shot?

Yes. A camera's dynamic is very limited compared to the human eye--if you did an evaluated metering for the scene, it would be thrown off by the very bright sky. A CPL or GND helps a lot for this.

By the way, really nice photo. If the sky wasn't blown out it would have been 100% perfect ;)

lakeraw.jpg

The 3rd one is good.

The 1st looks too plain.

The 2nd looks like a darker version of number 1.

Number 3 is good

Number 4 is too saturated.

Which one looks closest to what it was like on the day? The 1st one looks like a nice plain summers day, the 2nd one looks like it is about to rain :s But then the third one, I would have madea bit brighter and a bit more contrast to bring the colours out a little.

This last one just above though is great - the sky is a little bright but the green grass is good.

Regarding GND filters - is there any particular one I should be going for?

GND - Cokin, Lee

CPL - Hoya Pro1, B+W, Heliopan

Or if you can afford them, filters by Singh-Ray. Lee makes good filters. I have even been told the Hi-tech ones are nice but the Singh-Ray filters are argued as being the most neutral in color, the Cokin ones being the worst in terms of neutrality.

So looking at these filters, it seems the best way is to get the square ones, right? That way you can easily move it around. I read some reviews from some ppl who said it's easier/more convenient to hand hold them against the lens. What's your thoughts on that vs getting the proper attachments?

So looking at these filters, it seems the best way is to get the square ones, right? That way you can easily move it around. I read some reviews from some ppl who said it's easier/more convenient to hand hold them against the lens. What's your thoughts on that vs getting the proper attachments?

All you have to do is obtain the Cokin P filter holder, and the step up rings for the diameter of the lenses you want to use. Any P sized filter made by Cokin, Lee, Singh-Ray, Hi-Tech, or Tiffen will fit in the holder. I believe the holder can accommodate up to 3 different filters. You can also rotate the holder around the ring for diagonal positioning if you need to depending on the scene.

If you hand hold the filter, you could possibly damage the effect of the graduation by moving it. The holder will keep the filter in place but allow you to slide them into position for the effect.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WSCC - Windows System Control Center 10.0.3.8 by Razvan Serea Windows System Control Center is a free, portable program that allows you to install, update, execute and organize the utilities from various system utility suites. WSCC can install and update the supported utilities automatically. Alternatively, WSCC can use the http protocol to download and run the programs. WSCC is portable, installation is not required. Extract the content of the downloaded zip archive to any directory on your computer. Free for personal use. The setup packages and updates are downloaded directly from their author's website! This edition of WSCC supports the following utility suites: Windows Sysinternals Suite (including support for "Sysinternals Live" service) NirSoft Utilities Mitec and more... WSCC - Windows System Control Center 10.0.3.8 changelog: [NEW] update progress is now visible on the Windows taskbar [FIXED] fixed an issue with the Update dialog [FIXED] minor fixes Download: WSCC (64-bit) | 5.4 MB (Free for personal use) Download: WSCC (32-bit) | 6.3 MB View: WSCC Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The level of stupidity at Google and Microsoft is beyond belief. All they are doing by killing this is forcing people to jump over to Firefox and ditch them all together, therefore giving Firefox the market boost it needs to finally crush them all in the end.
    • HWMonitor 1.64 by Razvan Serea HWMonitor is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T, and video card GPU temperature. Special hardware monitors such as abit® uGuru and Gigabyte® ODIN™ power supplies serie are supported too. HWMonitor 1.64 changelog: Intel Arc G3 & G3 Extreme (Panther Lake). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). AMD Ryzen 7 7700X3D (Raphael). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). Support of HUDIMM and HSODIMM memory modules. New themes. New real-time graphs. Download: HWMonitor 1.64 | 3.4 MB (Freeware) Download: Portable HWMonitor 1.64 | 2.7 MB View: HWMonitor Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I have had a request since 2017 and so have many others that requested too and nothing has been done about it except its on our list to do.
    • I think it might be behind the trailer park amusements?
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      PsYcHoKiLLa
      172
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!