which do you like better?


Which do you like better?  

36 members have voted

  1. 1. Which do you like better?

    • Original
      2
    • Aperture Edited
      2
    • Tone Mapped
      26
    • HDR
      6


Recommended Posts

Ok, so I'm trying not to get 100% sucked into HDR, and I'm trying to just take single pictures and figure out how to edit them. But the problem is, I see my HDR images, and then my edited images, and can't help but thinking the HDR is so much better.

So, which one do you guys like better? Any suggestions? Etc.

Original Image (RAW converted to JPG)

lakeoriginal.jpg

Edited with Aperture (I tried my best. If you think you can do better, which you probably can, see the end of my post)*

lakeedit.jpg

Single RAW Tone Mapped with Photomatix.

laketonemap.jpg

5 RAW exposures combined into HDR with Photomatix.

lakehdr.jpg

* If you think you can do better using Photoshop, or what ever, then please show me! I challenge all of you to show me what you can do. Here is the original RAW file: http://crazzy88ss.statichost.co.uk/p/lakeraw.NEF

Link to comment
https://www.neowin.net/forum/topic/621769-which-do-you-like-better/
Share on other sites

I challenge you to blend manual exposures that are bracketed, or at least use a graduated neutral density filter. The sky is completely blown out and pretty much jacked. There isn't much to work with to be perfectly honest. I was able to somewhat save the image but the sky is just too blown out to bother with it. Sorry, that's just how it is.

A circular polarizer may have helped this image out too, but even then the sky is just too bright compared to the foreground. If the clouds were moving, then a bracketed set of images would have shown blurring in the clouds which could look good or bad depending on how fast they were moving.

The 4th image is 5 bracket manual exposures... Which is why there's the clouds look the way they do.

I really think you should invest in some GND filters. Meter the sky and the foreground, pick the right filter for the difference in lighting, and shoot away. You might blur the clouds a little bit depending on how it's done, but it's the best way to get the most natural exposure that doesn't looked heavily altered.

If you want to see what a GND filter can do, take a look at the work of Marc Adamus. Seriously, you will never want to use HDR again because you won't have to. :)

So basically the GND filters allow you to get a proper exposure on the whole image in one shot?

Yes. A camera's dynamic is very limited compared to the human eye--if you did an evaluated metering for the scene, it would be thrown off by the very bright sky. A CPL or GND helps a lot for this.

By the way, really nice photo. If the sky wasn't blown out it would have been 100% perfect ;)

lakeraw.jpg

The 3rd one is good.

The 1st looks too plain.

The 2nd looks like a darker version of number 1.

Number 3 is good

Number 4 is too saturated.

Which one looks closest to what it was like on the day? The 1st one looks like a nice plain summers day, the 2nd one looks like it is about to rain :s But then the third one, I would have madea bit brighter and a bit more contrast to bring the colours out a little.

This last one just above though is great - the sky is a little bright but the green grass is good.

Regarding GND filters - is there any particular one I should be going for?

GND - Cokin, Lee

CPL - Hoya Pro1, B+W, Heliopan

Or if you can afford them, filters by Singh-Ray. Lee makes good filters. I have even been told the Hi-tech ones are nice but the Singh-Ray filters are argued as being the most neutral in color, the Cokin ones being the worst in terms of neutrality.

So looking at these filters, it seems the best way is to get the square ones, right? That way you can easily move it around. I read some reviews from some ppl who said it's easier/more convenient to hand hold them against the lens. What's your thoughts on that vs getting the proper attachments?

So looking at these filters, it seems the best way is to get the square ones, right? That way you can easily move it around. I read some reviews from some ppl who said it's easier/more convenient to hand hold them against the lens. What's your thoughts on that vs getting the proper attachments?

All you have to do is obtain the Cokin P filter holder, and the step up rings for the diameter of the lenses you want to use. Any P sized filter made by Cokin, Lee, Singh-Ray, Hi-Tech, or Tiffen will fit in the holder. I believe the holder can accommodate up to 3 different filters. You can also rotate the holder around the ring for diagonal positioning if you need to depending on the scene.

If you hand hold the filter, you could possibly damage the effect of the graduation by moving it. The holder will keep the filter in place but allow you to slide them into position for the effect.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!