Worst hard drive crash I've seen


Recommended Posts

Not bad.

Here's my similar drive crash from work back in 2006..

100_2745.jpg

100_2746.jpg

100_2747.jpg

100_2748.jpg

100_2749.jpg

100_2750.jpg

100_2751.jpg

100_2752.jpg

100_2753.jpg

100_2754.jpg

It was part of a RAID 1 array that had been degraded for a few months..

The server wasn't important so I just ignored it until one day when I had to reboot the server and it wouldn't boot with the drive installed.

I took it out and opened it and thats the damage I found. I still have it.

I see this type of thing all the time at work. We actually researched why we were getting drives like this. Here is a crude explination, it was subjected to a jarring motion while powered off. This creates a small pit on the platter where the heads are parked and very slightly bends the heads. When you power up the drive, the head jumps when it gets to the pit, in turn creating another pit, and another, and another.... As the metallic dust builds up in the drive, it helps eat at the drive, like sandpaper. Eventually you get a pretty nasty groove, although I have never seen one that has eaten itself completely through the platter. Also the distance between the ridges in the groove and the resulting pattern in the dust is directly related to the speed of the platter. I wouldn't breathe or touch the dust in the drive. as it contains a lubricant for the heads. So the next time you are handling hard drives, treat them with respect, or they will turn out like this.

Not bad.

Here's my similar drive crash from work back in 2006..

...snip...

It was part of a RAID 1 array that had been degraded for a few months..

The server wasn't important so I just ignored it until one day when I had to reboot the server and it wouldn't boot with the drive installed.

I took it out and opened it and thats the damage I found. I still have it.

This is a very smooth cut. The original is a very rough, uneven cut- in fact it almost looks like it was ground down with a dremel. There are large broad strokes tha would apear to have been gouged out at one time...

Anyways, impressive nonetheless but I really don't like the uneven nature of the first one. The fact that the first drive was brought in in an unknown state, just 'found' to be that way with a valid security sticker says someone has been had with a nice practical joke.

Not bad.

Here's my similar drive crash from work back in 2006..

That's also an older drive, right?

I wonder what havoc a headcrash of epic proportions will cause inside the newer IBM/Hitachi drives, since they have platters made out of glass substrate.

Can you hook it back up and record the sounds it makes as it screams? I love the sound of cutting wood in the background. That must have sounded like a tablesaw cutting through a coffee can full of nails.

If you contact the manufacturer, maybe they will be interested in looking at it for you. I think the warranty is up though. By like 10 years.

This is a very smooth cut. The original is a very rough, uneven cut- in fact it almost looks like it was ground down with a dremel. There are large broad strokes tha would apear to have been gouged out at one time...

Anyways, impressive nonetheless but I really don't like the uneven nature of the first one. The fact that the first drive was brought in in an unknown state, just 'found' to be that way with a valid security sticker says someone has been had with a nice practical joke.

I'm not even going to try and argue with you to "prove" to you that the drive was not tampered with. I'll just say this, I stake my reputation as an IT professional and as a staff member of this site on it.

I'm not even going to try and argue with you to "prove" to you that the drive was not tampered with. I'll just say this, I stake my reputation as an IT professional and as a staff member of this site on it.

ha ha i will

i took the pics and finished disassembly of the hard drive

this harddrive was out of a gateway e4200 at a college. it was either part of our defunct test domain or linux lab.

if we have obsenly old equipment or a damaged drive we pull the HD set it aside and get rid of the rest. (at one point i had a stack of 30 HDs behind my desk, i still have sevral old 286 5 1/4 hds some caviar 17000s and several 5-20 gig drives that have been sitting for 3+ years now from pcs we find in random closets).

my best guess is the drive failed over a vacation and sat there unnoticed for days then was removed and set aside. there was no indication of the amount of damage on the outside other than our other network admin said "shake this thing, it sounds like a plater came loose" to witch we replied "no way in hell" so we took the cover off and found what you see in the first pic.

the carbon filter was in tact and there was no sign of moisture intrusion. the ground down jagged edge is from it slipping under and over the center ring of the plater witch as you see in in the first and second pic is sticking out as far as the ground down edge. what you cant see is the marks left on the side of the plater where it was thrown around in the casing and bound up aginst the side. it ground the center section smooth and the outer to a sharp edge

the platers had no real damage other than the inside and outside edge and had a mirror finish after i wiped the aluminum dust off and are now hanging on the wall in my office

my bet is neilgx is right about what happend to cause it. you wouldn't belive how many time we walk into office where there is a bad noise or smell of burnt electronics and they say we ment to call you about that a few days ago but it is still working so we thought it was ok.

That's also an older drive, right?

I wonder what havoc a headcrash of epic proportions will cause inside the newer IBM/Hitachi drives, since they have platters made out of glass substrate.

It's a Quantum Viking II 3.5 Series PX09J011 SCSI drive. 9.1 GB. I forget how old it is, but the other drive in the RAID 1 array (same model drive) is still running in the server hehe

you wouldn't belive how many time we walk into office where there is a bad noise or smell of burnt electronics and they say we ment to call you about that a few days ago but it is still working so we thought it was ok.

So true. So very, very true.

  • 1 month later...

I've seen something similar before. The hard drive in our CEO's PC crashed, making a scraping noise any time it was powered up. I pulled the drive apart out of curiosity and was amazed at what I found.

There were two platters in the drive, and at first glance they looked very odd. The mirror surface I expected to see was hazy. After touching the top platter I realized it was covered in a think layer of dust. I didn't take any photos of the tear down, but I saved the platters.

Blame the poor pictures on my camera phone and the poor lighting in my office.

The top of the first platter after being removed and wiped down. As you can see, it looks normal.

aV20PNgi.jpg

The opposite side of the top platter. It's obviously suffered from a failed head impacting the surface, and at first glance it just looks as though it's been scratched. That's not the case however...

aV20QiH9.jpg

The bottom platter, after being removed and wiped down. It's COMPLETELY CLEAR.

aV20QA99.jpg

The heads on both sides of the bottom platter failed, impacting the surface while the drive continued to spin. This caused the heads to act like sand paper and completely removed the magnetic material on the platter, which was what also happened to the bottom of the top platter. The same material is gone and you're looking at the top layer, THROUGH the bottom of the platter. This also explained the dust that was coating every square inch of the the drive. It was the tiny bits of the magnetic material that was scraped off of the platters.

What I found odd was that the platters are actually made of glass. I had always thought they were metal.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • As I've been usually saying lately - we all can thank "AI" for this.
    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      186
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!