Should I tune my Car's ECU?


Recommended Posts

Hey everyone. I'm interested in tuning my car (Saab 93 '03) model. Its the basic linear 1.8t 150bhp. I was looking into the performance upgrades and found this BSR PPC ECU tuner. Apparently all you do is plug it in and program it yourself and it'll boost the power to 204bhp.

Basically I'm asking what harm could it do if I went ahead with it and would I need to change any other parts to cope with the additional power/heat?

Link to comment
https://www.neowin.net/forum/topic/629639-should-i-tune-my-cars-ecu/
Share on other sites

You may want to make sure everything can handle the extra HP. My WRX is 227hp stock. I read that a basic ECU flash will give around 50HP. I also read that the max a stock turbo can handle is 280hp. I don't know that much about this stuff....yet, but I'm sure someone has done it and posted it on a forum somewhere.

yeah i'm know the chassis can handle the power cause the 2.0 Turbo is 210bhp and the 2.3 Aero is 260bhp. i'm not sure if the brakes and suspension are the same though.

this was taken from another forum:

There are only 2 differences between the 1.8t (150bhp) and the 2.0t (175bhp). Both are 2 litre engines, have the same turbo and same intercooler etc.

The difference in power is due to the programming of the Trionic 8 engine management system only, so yes, it's pretty much just a software thing.

The only other difference is a lack of a turbo gauge on the 1.8t. Many believe you get a better gain for your money by Hirsching/PPCing the 150bhp engine.

However, the 1.8t and 2.0t have a smaller turbo than the 2.0 Turbo.

That is not too expensive.

I use what's called a Dreamscience device on mine which adds an extra 40bhp and that costs ?499.

What's the make and model of the tuning device mate??

Its a BSR PPC designed for the car. There are limited tuners for Saab and your looking at Hirsch(Saab Approved), Maptun, BSR, and Nordic.

BSR are well known in the saab community and its a good reflash. No problems with it and the car should take it fine.

oh crap i just called up the insurance company and they said its not possible to insure me if i "upgrade" it. :D

technically though there is no physical modification. just the software modification in the ECU because it uses the stock ECU. ah well no point risking it for a slight bit of fun.

If you really want to remap your ECU try and get it done somewhere else first before you get a device to basically swap over the ECU.

I own a MINI and I have done a fair bit to it. running 18" wheels, coilovers dropped about 45mm etc etc. there is a thing I can get called Bluefin which swaps over the ECU. Literally plug and play and is reversable.

The only thing is with these type of things is that it is sort of universal! If you want to upgrade your HP properly I would recommend getting yourself to a proper company who can remap it for you and also put it on a rolling road before remap, during remap and after. it is more to the car as it does based on readings taken.

If you want quick fix to upgrade HP go for the superchip, if you want a bit more power, equal power vs torque higher up the rev range but still match the superchip go for the proper remap and rolling road!

oh crap i just called up the insurance company and they said its not possible to insure me if i "upgrade" it. :D

technically though there is no physical modification. just the software modification in the ECU because it uses the stock ECU. ah well no point risking it for a slight bit of fun.

That doesn't seem right. But then, I don't know your country's insurance laws. Certainly in the US any street legal modifications to your vehicle are covered by your insurance.

Some people worry about warranty issues. Also in the US, the manufacturer is only allowed to void the warranty if the problem is traceable back to the modified component. Your laws may vary.

In the UK if you do any modification to the car and declare it will raise your insurance but you will be covered for the total cost of the modification.

If you dont let them know and you crash they will cover you for what should be on the car or they can invalidate your insurance!

it is the same in the UK though, some companies dont allow for performance modifications or any modifications at all!! it all depends.

yeah i believe the insurance companies in Australia are similar to the UK. you must declare any modifications before you get the insurance and the premium will increase. unfortunately i've already paid for 6 months until september and they won't cover me if i do anything significant to the car.

would anyone with experience with RACV be able to elaborate to me further or rectify my assumptions?

If you really want to remap your ECU try and get it done somewhere else first before you get a device to basically swap over the ECU.

I own a MINI and I have done a fair bit to it. running 18" wheels, coilovers dropped about 45mm etc etc. there is a thing I can get called Bluefin which swaps over the ECU. Literally plug and play and is reversable.

The only thing is with these type of things is that it is sort of universal! If you want to upgrade your HP properly I would recommend getting yourself to a proper company who can remap it for you and also put it on a rolling road before remap, during remap and after. it is more to the car as it does based on readings taken.

If you want quick fix to upgrade HP go for the superchip, if you want a bit more power, equal power vs torque higher up the rev range but still match the superchip go for the proper remap and rolling road!

Hi mate

The one he mentions I'm sure is the Saab equivalent of the Bluefin

I had Bluefin on mine before I changed to my dreamscience unit, as I'll get it live mapped when I have all my required mods done

Hi mate

The one he mentions I'm sure is the Saab equivalent of the Bluefin

I had Bluefin on mine before I changed to my dreamscience unit, as I'll get it live mapped when I have all my required mods done

did you have problems with the bluefin??

you have a mini then?? what have you done with it

  • 3 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • TechPowerUp GPU-Z 2.70.0 by Razvan Serea GPU-Z is a lightweight system utility designed to provide vital information about your video card and graphics processor. At launch, it automatically scans your system and reports the card name, GPU, release date and transistors, BIOS version, ROPs, memory type, and memory size. Main Features: Supports NVIDIA, AMD, ATI and Intel graphics devices Displays adapter, GPU and display information Displays overclock, default clocks and 3D clocks (if available) Includes a GPU load test to verify PCI-Express lane configuration Validation of results GPU-Z can create a backup of your graphics card BIOS No installation required, optional installer is available Support for Windows XP / Vista / Windows 7 / Windows 8 / Windows 10 (both 32 and 64 bit versions are supported) GPU-Z 2.70.0 changelog: Improved kernel driver security Added die size for Qualcomm Adreno 741 Added support for NVIDIA RTX 6000D, RTX Pro 500 Blackwell Embedded, Tesla V100-DGXS-32GB, PG500-216 Added support for Intel Arc Pro B70, B65, A60 ES, Alder Lake ES Added support for Qualcomm Snapdragon X2 Elite, 778G/782G Added vendor detection for HKC/Sambada, AWES Download page: GPU-Z 2.70.0 | 11.1 MB (Freeware) View: GPU-Z Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I know I won't ever be using it to make my game. I'd rather pay humans.
    • Nah. For every indie dev that needs to create code for "stuff" or textures, it's a godsend enabler to possibly tackle a project that you may not otherwise. The end result and testing will tell the truth if everything works or doesn't, or a game is just mediocre slop, but now these tools are now there and it's the developer's duty to judge the outcome, and even more so for pro studios. And you gotta remember that they will be at an early stage.
    • whoosh my comment went over your head. Enjoy your notchless 3:2 OLED device
    • As a game dev, today was really depressing. They announced that Blueprints will be deprecated in UE6 to be fully replaced by their sh**ty Python-like Verse language... They also announced that 5.8 will be the last version of UE5 until UE6 comes out in MID 2029!!!! They have completely lost the plot.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      159
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      67
    5. 5
      neufuse
      63
  • Tell a friend

    Love Neowin? Tell a friend!