8 million by Oct 1st 2008 & Win!


Can we do it?  

958 members have voted

  1. 1. 8 million posts by Oct 1st 2008

    • No Chance!
      173
    • Yep, no problem
      785


Recommended Posts

A carpenter (builder) is a skilled craftsman who performs carpentry - a wide range of woodworking that includes constructing buildings, furniture, and other objects out of wood. The work generally involves significant manual labor and work outdoors, particularly in rough carpentry.[1]

Since all of carpentry's required knowledge is gained through experience, the trade can be relatively easy to enter (this varies with the legal requirements from country to country). It is possible through dedication to have a prosperous career in carpentry.

The word "carpenter" is the English rendering of the Old French word carpentier (become charpentier) which is derived from the Latin carpentrius [artifex], "(maker) of a carriage.[2] The Middle English word (in the sense of "builder") was wright (from the Old English wryhta), which could be used in compound forms such as wheelwright or boatwright.[3]

In British and Australasian slang, a carpenter is sometimes referred to as a "chippie". The German word for carpenter is "Zimmermann" (room-maker, literally room-man), and hence is the source for the surname of many people in German and English-speaking countries.

Carpentry in the United States is almost always done by men. With 98.5% of carpenters being male, it was the fourth most male-dominated occupation in the country in 1999.[4]

Contents

[hide]

* 1 Types and occupations

* 2 History

* 3 Training

* 4 Famous carpenters

o 4.1 Religious figures

o 4.2 Contemporary

* 5 See also

* 6 References

* 7 External links

[edit] Types and occupations

tools of a medieval carpenter, c. 1465

tools of a medieval carpenter, c. 1465

A mayster is one who does rough carpentry; that is, framing, formwork, roofing, and other structural or other large-scale work that need not be finely joined or polished in appearance.

A joister is a carpenter that puts in the floor joists. Floor joists are the horizontal boards connected to the frame of a structure at the level just below the floor. They give the floor strength for holding weight. Also, they give a position to which the floor may be fastened. Joisters also put on the joists for the decks of a building. Joisters need good balance to install the beams and joists on buildings, considering the elevation involved.

A finish carpenter (South America) or joiner (traditional name now obsolete in North America) is one who does finish carpentry; that is, cabinetry, furniture making, fine woodworking, model building, instrument making, parquetry, joinery, or other carpentry where exact joints and minimal margins of error are important. Some large-scale construction may be of an exactitude and artistry that it is classed as finish carpentry.

A trim carpenter specializes in molding and trim, such as door and window casings, mantels, baseboard, and other types of ornamental work. Cabinet installers are also referred to as trim carpenters.

A cabinetmaker is a carpenter who does fine and detailed work, specializing in the making of cabinets, wardrobes, dressers, storage chests, and other furniture designed for storage.

A ship's carpenter specializes in shipbuilding, maintenance, and repair techniques (see also shipwright) and carpentry specific to nautical needs; usually the term refers to a carpenter who has a post on a specific ship. Steel warships as well as wooden ones need ship's carpenters, especially for making emergency repairs in the case of battle or storm damage.

A scenic carpenter in film-making, TV, and the theater builds and dismantles temporary scenery and sets for the production of these entertainments.

A framer builds the skeletal structure or framework of buildings. Techniques include platform framing, balloon framing, or timber framing (which may be post-and-beam or mortise-and-tenon framing).

A roofer specializes in roof construction, concentrating on rafters, beams, and trusses. Naturally, a roofer must not be afraid of heights and must have good balance as well as carpentry skills. In Australia this type of carpenter is called a roof carpenter, and in that country a roofer is someone who puts on the roof cladding (shingles, tiles, tin, etc.). (On many jobsites in the United States, roofer also has this connotation.)

A formwork carpenter creates the shuttering and falsework used in concrete construction.

In Japan, Miya-daiku (Temple carpenter) performs the works of both architect and builder of shrine and temple.

[edit] History

This section does not cite any references or sources.

Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. (May 2008)

A medieval carpenter was a well performed craftsman that worked with wood. Carpentry went through many changes over the medieval period. By the 15th century, carpenters used most of the tools that are found in a carpenter's toolbox today, although they were often more simple versions. The different woodworking professions implied very different social standings.

[edit] Training

Carpenters in an Indian village

Carpenters in an Indian village

Tradesmen in countries such as Germany are required to fulfill a formal apprenticeship (usually three years) to work as a professional carpenter. Upon graduation from the apprenticeship, he or she is known as a journeyman carpenter. Up through the 19th and even the early 20th century, the journeyman traveled to another region of the country to learn the building styles and techniques of that area before (usually) returning home. In Germany, this tradition of traveling carpenters has survived the 20th century on a small level (also done by bricklayers, roofers and other traditional crafts) and is experiencing growing popularity again in the early 21st century. In modern times, journeymen are not required to travel, and the term refers more to a level of proficiency and skill. Union carpenters in the United States are required to pass a skills test to be granted official journeyman status, but uncertified professional carpenters may be known as journeymen based on their skill level, years of experience, or simply because they support themselves in the trade, and not due to certification or formal woodworking education.

After working as a journeyman for a specified period, a carpenter may go to study or test as a master carpenter. In some countries, such as Germany or Japan, this is an arduous and expensive process, requiring extensive knowledge (including economic and legal knowledge) and skill to achieve master certification; these countries generally require master status for anyone employing and teaching apprentices in the craft. In others, it can be a loosely used term to describe a skilled carpenter. In Canada Carpentry is a Red Seal trade requiring a formal apprenticeship and an interprovincial exam. While each province sets its own standards for exactly how long the apprenticeship takes the average is about 4 years of both on the job instruction and college based training.

In the modern British construction industry, carpenters are trained through apprenticeship schemes where GCSEs in Maths, English and Technology help, but are not essential. This is deemed as the preferred route as young people can earn and gain field experience whilst training towards a nationally recognized qualification.

Fully trained carpenters and joiners will often move into related trades such as shop fitting, frameworking, bench joinery, and maintenance and system installation.

A woodie is a type of car, more specifically an early station wagon (US) or estate car/shooting brake (UK), in which the rear portion of the car's bodywork is made of wood. Frequently this wood is visible, since it is covered in a clear finish, either over the entire wooden area or sometimes just on the framework with the interior panels painted.

The vast majority of woodies were produced before the end of the 1950s at which time safety regulations and changing automotive fashions meant the effective end of the style. Woodies were generally not produced by the original car manufacturer, but were third-party conversions of regular vehicles. Some were done by large, reputable coachbuilding firms, while others were built by local carpenters and craftsmen for individual customers.

It is a derivative of the body-on-frame method of car construction. Earlier cars generally had aluminium or steel panels bolted on top of the wood framing. Woodies were originally cheaper because they didn't need these panels and their fitment and painting. So railway stations used them for hackwork of luggage and petty shipments; hence the name, station wagon. The tradition of the woodie remains in the woodgrain decals and plastic beams attached to a structural steel body of many station wagons. These imitations are considered deceitful for the same reasons that modern architects maintain Adolf Loos's statement, "Ornament is Crime."

Biscuter Commercial 200 C from Spain

Biscuter Commercial 200 C from Spain

This car body style was popular both in the United States and the United Kingdom. Woodies were produced from all kinds of cars, from basic to luxury, but the most popular conversions in the US were large, powerful but not highly luxurious models. By contrast, in Europe early woodies were usually built on luxury car platforms such as Rolls-Royce. In the 1960s the Morris Minor and Mini Traveller were more basic vehicles factory built in woodie style.

In the 1960s and to some degree the 1970s woodies were considered undesirable, unfashionable old vehicles. California surfers, among others, realised the potential of these cars; they were cheap, large enough to carry a good number of people, surfboards and equipment, and could be fixed up with woodworking skills. Thus, the woodie became the archetypal vehicle of the surfer; the popular surf-pop group The Beach Boys directly referred to them in several of their songs. There is probably a higher population of surviving woodies in California than anywhere else, aided by the area's ideal climate for preserving the vehicles; warm, dry but not desiccating, with rare rainfall and less snow?hence, no road salt.

These days, woodies are highly collectible antique cars and a good example can fetch a very large amount of money. The wooden bodywork has often not survived all that well, increasing the rarity.

GTFO

Definition from Wiktionary, a free dictionary

Jump to: navigation, search

[edit] English

[edit] Initialism

GTFO

1. (Internet slang, offensive) Get The **** Out (literally)

GTFO of the forums.

2. (Internet slang, offensive) Get The **** Out (suggesting that a previous statement is a lie, exaggeration, or nonsense.)

I just found a hundred bucks.

GTFO

[edit] Usage notes

* Often written in lower case (gtfo).

Wikipedia, "the free encyclopedia", was originally founded in 2001 as an English-language wiki featuring satirically themed articles. It is formatted as a parody of Uncyclopedia and aims ultimately to devalue all enjoyable concepts. Some say that it is actually a database of useless trivia, including such things as: lists of trains, Pok?mon, lists of Mortal Kombat characters that don't exist, hyperactive alter egos of fictional characters, one-time villains from Mario games, road intersections, boring suburban schools, garage bands, cats, webcomics, Bionicle characters, characters from English soap operas, list of national football teams, penguins, Windows, list of GTA games, Stargate SG-1, God, Satan, life, the universe and Everything, as well as things they call articles. However, Wikipedia is in fact a Massively Multiplayer Online Editing Game played by experts in redundancy, skepticism, pseudoscience, hyperlinking, reverting articles, demanding reliable sources, redundancy, verification, redundancy, identifying original research and initiating subtle flamewars over what is encyclopedic.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The entire world moved to the vastly superior and now universally supported Dolby Atmos technology a very long time ago, mate.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      544
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!