Photo Printing...

By jbarcus81
in Digital Camera Lab

 Share

Recommended Posts

Veteran

jbarcus81

Posted
Posted

I have a picture I'd like to print a large print of.. it's an odd size and I've tried online services but they keep giving me error messages and telling me the quality won't be so good because of resizing.. can I print a blow up with my HP Photosmart 8450 on several 8x10's and put them together?? That even possible??? The image I was to print is...this is a scaled down version.. the actual image is 3008x1138 pixels...

post-4844-1211176740_thumb.jpg

Link to comment
https://www.neowin.net/forum/topic/637744-photo-printing/
Share on other sites
Grand Master

SirEvan

Posted
Posted

what output size do you want to print this at? Try Calypsoinc.com I use them for all my model poster shots that are signed by my models, the quality is the best you'll find anywhere, but don't expect prices to be cheap, up to 16x20 is 25$ a pop. but they will have no problems printing it. Contact me or email me at [email protected] if you want help or advise with this company, I highly recommend them.

Link to comment
https://www.neowin.net/forum/topic/637744-photo-printing/#findComment-589412332
Share on other sites
Grand Master

SirEvan

Posted
Posted

you have to email them and ask them for the username:password for the ftp site to upload your work

Make sure you use one of their profiles first, and follow the directions under the "prefered section" so you can save a little bit on each print

Then after you upload your file to the guest ftp, send their customer service an email with your name, billing address/shipping address the name of the file, what type of print you want, what finish (glossy, matte, etc) the resolution of your image and the size you want it printed. They will confim with you, and then let you know when it's printed so you can provide your credit card information. They ship fairly quickly, I live about 80 miles or so from them, and get my prints within a day.

I recommend the Lightjet matte or semi gloss finishes, or if you're doing landscape, then glossy. you can also call their customer service number for assistance if you need it

Link to comment
https://www.neowin.net/forum/topic/637744-photo-printing/#findComment-589425542
Share on other sites
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation

      By FunkyMike · Posted

      Useful to know, thanks!
    • Here is how I fixed Windows 11 not booting after clean installation

      By TarasBuria · Posted

      Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates

      By +LightEco · Posted

      I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • what other retro software do yall use

      By Nick H. · Posted

      <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • what other retro software do yall use

      By flexorcist · Posted

      ive always been fascinated by old software this is an old video player for windows from apple

  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!